long time lurker on the site.
i want to brainstorm an idea i have
a wooden ball jointed doll with elastic cloth muscles
the ball joint
https://www.heliopresto.com/Files/13280 ... zx1200.jpg
the elastic cloth muscle
https://www.dollarama.com/fr-CA/p-elast ... es/0201254
https://gab.com/BookEaterStoryEater/pos ... 82/media/1and ball jointed with a towing ball for shoulder joints while elbow joint could just be a middle cut in the wood at the joint on both elbow ends and put a nut and a bolt with a metal elbow.
most of the arms would hollowed out and i would put a metal sheet inside, maybe 1-2 cm metal sheet inside so i can attach stuff to it inside.
something like that but flatter, very flat. preferably in stainless steel (ideal) or steel.
https://www.hooverfence.com/mas_assets/ ... /34113.Jpg
the joint would go inside the arm itself for 2 inches so i can glue it and bolt so it does not move, ever (and this is why i would put metal inside the hollowed out arm, to bolt it together or weld it if i can)
the torso could be cut with the human diaphargram line so i can put another ball joint or make a skeleton joint just like a real doll
i have no idea how to make a clamp for the ball joint in the elbow for the arm attachment.
the wood statue i made is very heavy:24kgs or 50 pounds. i have chronic fatigue so my muscles get weaker every year.
people were not kidding why they say dolls are heavy, the doll i want is 55 kgs (JY DOLL 170CM SEX DOLL KERRY). i figured i would make a 3triple pulley system to lift her up once i have her but holy shit at 55kg it's heavy, too heavy for me.
i'm planning on buying a doll head and putting inside 3d printed animatronic eyes
https://duckduckgo.com/?q=3d+printed+an ... dth%3D2100
and using a inmovv as inspiration to create the hands and stuff and creating a touch feedback system with wires and stuff.
people have lots of ideas here and i'm balling them into 1 system who would be open source and be able to replicated because why not.
i will also make skin plates to avoid the creases lines of silicon and TPE in the shoulders, elbows and other parts when the doll would move (the "I can move' poster discussed it that the silicon skin bended badly) so would make seams on the robot to avoid that and the plates could be removed for maintenance.
another poster idea came in the i could make a removable breast plate along with ass plate so i can swap breasts and ass as i want it and perform maintenance.
the post can be found in "CrownPeaks L-Cup Breast Toy + YL-158 = Heavenly Combo Review"
viewtopic.php?t=125167
he glued a plate to his doll after removing the old breasts and it works.
How the plates are made would be aluminum at least 2 cm thick or a bit more since aluminum is light but also easy to deform and warp. They would be cut as desired and i would put the silicon skin over it after having clamped it and filed every edge and extremities to avoid cuts.
The head would have eyes with thermal cameras and regular cameras like inmovv, it's easy to do, just buy a old webcam and harvest the camera inside.
https://www.youtube.com/watch?v=Ftt9e8xnKE4
or Inmovv version
https://www.youtube.com/watch?v=MoSU2P5_Svo
i would code a ai inisde a small tower computer and have the doll be able to see thermal and normal ang gauge my exhaustion and fatigue along with loss of mobility and stuff.
the doll would be mainly be a comfort doll with enough strength to move her arms and legs but not enough to move around
it's basically a upgrade version of "i can move" .
viewtopic.php?t=161940
the problem i would have is the servos and actuators breaking all the time with every movement (just like Prin which is my biggest fear, having to replace everything every 2-3 movements). This is why the doll would have removable plates all over (both upper and lower arm of the forearm and lower arm would be removable along with everything else).
For body heat, it's easy since the plates would be in alluminium and would act as a heat sink but it could be dangerous. or maybe i just make cooper coils in identations on front and back side of body and put them inside channels where 1 cm or less copper sheets would extend out.
i would make a second chest plate, for nursing, because i get too tired to eat so i thought i could make a breast feeding robot. i would take a cooper container or better stainless steel and put in a tube, maybe just a plastic tube that extends to a blat nozzle or something and put the nipple with micro holes over it but i'm scared of mold and bacteria.
i wat to make a heavy duty robot that is basically a peaceful war machine to lift me up and move me if i can't walk and stuff but that's outside my expertise because it would be heavy, will not walk but roll on threads or wheels and it's arms and legs + torso would be very big and strong and the inner skeleton would be in steel of 1/2 cm thick or more all around.
does anyone here figured out to make suspension for a doll for intercourse?
Because i simulated it in my mind and thrusting your hips would break the hips of the doll along with most joints and servos placement among other things since plastic would break or split because of the stress.
i thought about using silicon padding in the hips and around the sex parts to absorb the impact but i know silicon can also get chafed and have degradation too.
what if we made another skeleton to absorb the impact? like that inner skeleton in the hips would move with our hips like a counter balance. it could work
if i could put ai in the doll and stuff, i would put it on a wheelchair to be rolled around. i haven't figured out how to make a doll walk yet, i have an idea but i'm not sure it would work.
disclaimer: i am disabled and short on funds since i'm on disability and i do not own a 3d printer so i work with wood. i still live at home with my parents because functionning is hard for me. i will get my own place one day but i'm limited of what i can do
however i could advance doll technology and the reason I,m doing my own now is because doll skeletons are crap. Someone somewhere in the forum said that for the material, it's very fragile, break too easily and the people working on them either have bad steel/alluminium/metal or work it badly resulting in breaks that should not be possible with good metals.
i don't about that but i'm curious what a wooden doll with passive joints would look like so i'm making one.
