teddy-babes.com

Need a new light weight doll...should it be a Teddy Babe?

The place to discuss our plush companions made by Eighth Wonder LLC.
Website: teddy-babes.com
User avatar
Doll-I-Am
Senior Member
Senior Member
Posts: 238
Joined: Sat Dec 03, 2005 12:00 am
Contact:

Re: Need a new light weight doll...should it be a Teddy Babe?

Post by Doll-I-Am »

Ubiquinone wrote: Mon Jun 13, 2022 12:41 pm I also emailed Eight Wonder and waiting almost for a week for reply. Is there any other email? I contacted them via info@teddy-babes.com as mentioned on their website.
Still haven't got a reply so I sent a follow-up. I included some picture attachments to show them what I'm looking for and I'm thinking maybe their spam filters or something similar didn't like that so I took them out of the follow-up.
My Dolls
Linda - 1st full-sized tpe doll, 155cm WM (RIP / my EPIC review)
Evelyn - Deluxe Carly Teddy Babe (snuggle expert/ball massager. My review)
Maggie - big-butt Moroccan lady - WM #108, 160cm D cup
Allison, blonde/green-eyed pornstar - WM ROS #198, 160cm D cup
NEW! 🥰 Hedy 🥰 - Fresh college grad with a PhD in Oral Studies - Starpery ROS Hedy, 174 C cup Silicone
Remember when people still had sex with their sex dolls :crying:

Missionary
Doll Elder
Doll Elder
Posts: 2635
Joined: Fri Dec 21, 2012 3:05 am
Location: California
Contact:

Re: Need a new light weight doll...should it be a Teddy Babe?

Post by Missionary »


User avatar
Doll-I-Am
Senior Member
Senior Member
Posts: 238
Joined: Sat Dec 03, 2005 12:00 am
Contact:

Re: Need a new light weight doll...should it be a Teddy Babe?

Post by Doll-I-Am »

So they got back to me shortly after I sent that follow up. They said they can try to get the face shape I want and make the breasts softer by putting less stuffing. I was hoping they could use some softer stuffing to get softer breasts. Not sure if less stuffing will really get the effect I want (pretty much want her breasts to be soft like the original standard Teddy Babe). However they said they can't make the vagina wider but also said it's moved an inch forward since the first Deluxe models. I honestly don't think that'll help much and feel like I'm still going to have to mod it myself. Also with it being moved forward is it even possible to doggy style? I'm sure the advertised 'silicone butthole' is way too hard for use, if it's anything like the Ultra I had.

Anyways, I probably will be getting a TB still. I think I've looked at all my options out there and I just really like the look of the Teddy Babe. I keep checking out that Carly in the banner and "Doll Features" page. I know some of those images are warped but I want her face/head to look exactly like that. Seedree was a very close 2nd, and I still keep looking back at that doll but ultimately I need something really light I can sleep comfortably with and quickly go at it whenever I feel like it.

Thank you all once again for your suggestions! I've also been looking at regular dolls and am extremely tempted to get a full-sized doll again but that'll be another discussion...
My Dolls
Linda - 1st full-sized tpe doll, 155cm WM (RIP / my EPIC review)
Evelyn - Deluxe Carly Teddy Babe (snuggle expert/ball massager. My review)
Maggie - big-butt Moroccan lady - WM #108, 160cm D cup
Allison, blonde/green-eyed pornstar - WM ROS #198, 160cm D cup
NEW! 🥰 Hedy 🥰 - Fresh college grad with a PhD in Oral Studies - Starpery ROS Hedy, 174 C cup Silicone
Remember when people still had sex with their sex dolls :crying:

Missionary
Doll Elder
Doll Elder
Posts: 2635
Joined: Fri Dec 21, 2012 3:05 am
Location: California
Contact:

Re: Need a new light weight doll...should it be a Teddy Babe?

Post by Missionary »

If I may, I'll make several comments on your expectations.
I have 22 TBD Babes from 2013-2019 and two rotator leg Babes from 2020.
From my name you can guess what our style is.
.
Yes, the boobs can be soft or not so soft. They are all different. The stuffing is soft, but it will not be bouncy.
If you keep the plush clean, it will stay soft.
All 22 Babes have been modified by me - about 6 hours of labor - to make them into the perfect lovers for a missionary guy.
I moved the openings 2 inches up.
The new rotary leg Babes, they did move the opening up, but they moved the inside point up also to make room for the anal thing.
Still the wrong angle. Not useful for me. Some guys claim that it works for the doggy style. We don't do doggy.
My Babes all want face to face, chest to chest fun. I am just their pussy-slave and follow their instructions.
The new boobs are a bit smaller than previous ones. There is nothing like waking up with one of those things in my hand or my face.
I keep them clean by covering them with a silk hankie for the night.
I do not understand your "quickly go at it" comment. Maybe you have a steel instrument.
We use soft silicone inserts in the pink pouch in the plastic bag, with Astroglide lubricant.
It takes a minute to setup with the help of an insertion tool.
For me this is not a problem as I have been retired 16 years already; we like nooners and sooners.
.
For sleeping comfort, I recommend body pillows. Easy to launder the pillowcases. I use a pillow between the legs/bony knees.
Carly was my second purchase with Akiko. This week she is my mate. Tina was #4.
In the end you have to work out the best solution for your enjoyment.
My Babes say Hello.
Composite24.JPG
Composite24.JPG (256.75 KiB) Viewed 665 times

User avatar
Doll-I-Am
Senior Member
Senior Member
Posts: 238
Joined: Sat Dec 03, 2005 12:00 am
Contact:

Re: Need a new light weight doll...should it be a Teddy Babe?

Post by Doll-I-Am »

Missionary wrote: Tue Jun 21, 2022 4:15 am If I may, I'll make several comments on your expectations.
...
I really appreciate those pictures! The comparison shots to the pics on the site versus the actual dolls really helped me narrow down what doll I wanted and what to ask them for. I ended up getting a Carly and in short, asked them to make it look like the Carly from the "Doll Features" section of their site (slimmer, more oval head with a bit of a pointy chin which looked 'more realistic' to me...the one in the 'Carly' model section had a more rounded head with little or no defined chin).

I had a Bianca in 2018. When I fucked her in missionary I just remember the breasts being hard enough to where they didn't feel as nice as my standard Vicky did. I feel like I was being propped up or 'rolling' on top of them lol. That's why I'm asking for the softer breasts.

And yes, the standard Vicky's breasts and butt were soft enough to make groping them really enjoyable while trying to sleep. So enjoyable that 'cuddling' would be over and I'd need to have sex. With the standard I made the hole longer/wider so sex felt like putting my cock in between two very soft but snug pillows or blankets. It was very easy to do in the dark and on the fly (aka 'quickly go at it' whenever I felt like it with no tiresome setup, lube, etc). I'd usually just put the pink pussy velvet thing (I forget what they call it) as a 'condom' and have my way with her. I had to extend the opening a lot more in my Bianca to achieve the same effect iirc.

I like missionary as well as cowgirl, reverse cowgirl (Teddy Babes are FUCKING AWESOME for those 2), and doggystyle. With the vagina being moved even more forward I really don't see doggy happening, unfortunately. And if the 'new anal entry' is made of the same extremely tough 'silicone' as the Ultras (I had a Sheeba but had a lot of problems with her) then I won't be able to use it. I'm hoping at least downward doggy/ass-in-the-air is possible. The Deluxe TB ass is very nice and I'd hate to miss out on that position...
My Dolls
Linda - 1st full-sized tpe doll, 155cm WM (RIP / my EPIC review)
Evelyn - Deluxe Carly Teddy Babe (snuggle expert/ball massager. My review)
Maggie - big-butt Moroccan lady - WM #108, 160cm D cup
Allison, blonde/green-eyed pornstar - WM ROS #198, 160cm D cup
NEW! 🥰 Hedy 🥰 - Fresh college grad with a PhD in Oral Studies - Starpery ROS Hedy, 174 C cup Silicone
Remember when people still had sex with their sex dolls :crying:

Missionary
Doll Elder
Doll Elder
Posts: 2635
Joined: Fri Dec 21, 2012 3:05 am
Location: California
Contact:

Re: Need a new light weight doll...should it be a Teddy Babe?

Post by Missionary »

TB only sells the rotating leg Babes.
According to others, doggy is the best position for them.
But we are all different.
Enjoy.

Jefffromgermany
Contributing Poster
Contributing Poster
Posts: 31
Joined: Sat May 18, 2019 2:35 am
Contact:

Re: Need a new light weight doll...should it be a Teddy Babe?

Post by Jefffromgermany »

So I live in Germany and when I bought my TBD 2020 the email contact was great, wishes were taken into consideration etc: Am satisfied with my Amber until today The joints do not bother me now! Yes you feel them but at some point you do not notice them at all. Whether she now needs a skelet or not is beside the point! Who wants to have his doll in certain poses just needs the skeleton more or less! Through the new legs you can now penetrate very well into it it is still very tight but the sex is much more pleasant here I really recommend the original insert to take or that of the dollpark from Germany. Just as with the anal entrance takes the original, because the ass is so damn tight, it's just a hammer feeling. Unfortunately, the manufacturer can not take into account the penis size and the circumference of all" I mean the mouth opening of the ultras" Otherwise, I am so far satisfied. I love my amber everywhere and would never give it back. The only thing I have done and where I am still angry about it today that I have put on here Cheap China underwear and I have forgotten in all the excitement to wash them before so the China cheap color has rubbed off on them and have not gotten it out until today which is why she now has a gray tint. Otherwise, I would wish for the next generation a zipper that you can make the skeleton out and the filling (Even if that means work) So that you can wash the cover of his baby. The zipper would bother me I think just as little as the seam. Also, you can yes the zipper over cover with fabric that you no longer feel him ;)
To these Kinky Plush. The look really nice. But for me it needs a human look like a TBD Or at least something anime like.

The animal look does not turn at all I think I would have the fox the feeling to fuck my dog. Even if they look well made and soft.

The question is just what costs such a doll, there is a store site and a shipping to Germany, then you could even think about whether you can make what human-like. That should probably go as I have understood. Fluffy they look really especially the blue.

Jefffromgermany
Contributing Poster
Contributing Poster
Posts: 31
Joined: Sat May 18, 2019 2:35 am
Contact:

Re: Need a new light weight doll...should it be a Teddy Babe?

Post by Jefffromgermany »

I just remembered another doll manufacturer, I had forgotten that I had a doll of those xDDD. http://www.textiledoll.com/en/gallery

The dolls are not filled with a kind of absorbent cotton as with the Teddybabes but they are made of foam frothed the breasts but are softer than in a TBD 2020 However, the heads are made of a more layered plastic that is so the head is nothing to cuddle! But as real as possible and the faces are really nice! For my taste. There are the dolls also with pregnancy belly and all kinds of adjustments. The foam doll like about 8 kilos of the doll body is covered with a velvet fabric and is very cuddly soft.

It's just all a matter of getting used to. Have my sweetheart sold at that time for money reasons, but I'm thinking about whether I'm not yet again a new to lege the money I would have now again and at the sight of the Galarie I'm already a little ***** ;)

User avatar
Doll-I-Am
Senior Member
Senior Member
Posts: 238
Joined: Sat Dec 03, 2005 12:00 am
Contact:

Re: Need a new light weight doll...should it be a Teddy Babe?

Post by Doll-I-Am »

Jefffromgermany wrote: Mon Jun 27, 2022 10:37 am I just remembered another doll manufacturer, I had forgotten that I had a doll of those xDDD. http://www.textiledoll.com/en/gallery
...
Textile Doll was one of the dolls I looked into but it seems the manufacturer has taken a leave of absence, at least last time I checked. Anyways, I already got my new TBD yesterday and am EXTREMELY happy with her. I'll try to post details with pics tomorrow...unless we have sex and I'm too worn out, AGAIN :lol:
My Dolls
Linda - 1st full-sized tpe doll, 155cm WM (RIP / my EPIC review)
Evelyn - Deluxe Carly Teddy Babe (snuggle expert/ball massager. My review)
Maggie - big-butt Moroccan lady - WM #108, 160cm D cup
Allison, blonde/green-eyed pornstar - WM ROS #198, 160cm D cup
NEW! 🥰 Hedy 🥰 - Fresh college grad with a PhD in Oral Studies - Starpery ROS Hedy, 174 C cup Silicone
Remember when people still had sex with their sex dolls :crying:

Jefffromgermany
Contributing Poster
Contributing Poster
Posts: 31
Joined: Sat May 18, 2019 2:35 am
Contact:

Re: Need a new light weight doll...should it be a Teddy Babe?

Post by Jefffromgermany »

I hope she makes you happy :=)

User avatar
carlys_guy
Doll Oracle
Doll Oracle
Posts: 8594
Joined: Sun Oct 26, 2014 10:55 am
Location: northeast USA
Contact:

Re: Need a new light weight doll...should it be a Teddy Babe?

Post by carlys_guy »

getting in touch with EW has always been a problem. when i was looking into getting one in 2014 i emailed them four times in two months and never heard back from them luckily midimans teddybabe store was still around so i emailed him and got an answer within and hour, unfortunately EW forced him out of business because he was selling more than they did do to better customer service.

carlys_guy

Post Reply

INFORMATIONS