SexDollAmerica.com

My Hedy 171C is here!

Read about the latest TDF news here. Have an announcement that you would like to make? Here is the place to do it!
User avatar
sirdave62
Former Member
Posts: 150
Joined: Fri Apr 09, 2021 4:31 pm
Location: Florida - Gulf Coast

My Hedy 171C is here!

Post by sirdave62 »

Hello Everyone,

I can hardly believe it! She arrived this afternoon! :D

Her name is Lana (like Superboy's girlfriend, also a redhead).

As promised, here are my unboxing photos and first impressions review:

PACKAGING:

Standard Starpery packaging. I was quite relieved the box arrived in decent condition! :thumbs_up:
20210630_143431.jpg
20210630_143431.jpg (1.39 MiB) Viewed 6282 times
20210630_143827.jpg
20210630_143827.jpg (891.06 KiB) Viewed 6282 times
20210630_144022.jpg
20210630_144022.jpg (1015.81 KiB) Viewed 6282 times
20210630_144231.jpg
20210630_144231.jpg (1.07 MiB) Viewed 6282 times
ACCESSORIES:

Bikini-type lingerie top and bottom with thin pink robe. Not bad for a random selection. :)
Comb with wide-spaced metal teeth, for artificial hair I presume.
Sound device with USB cord (not yet installed)
Small plastic bellows with nozzle for cleaning.
1 extra neck bolt, default bolt with head is quick-connect type.
1 USB heating rod, far too small for her love holes. I have ordered a USB rod and electric blanket from Amazon, but she got here first! :o
20210630_153029.jpg
20210630_153029.jpg (1.69 MiB) Viewed 6282 times
OUT OF THE BOX - WEIGHT

Weight was one of my major concerns going in, as I wanted something a little taller than petite. Lana has been updated with weight reduction, and weighs in at 75.5 lbs (34.2 kg) according to my scale. Not bad considering her height, and she is easier to move around than I expected. I was even able to get her to free stand on the scale!
20210630_205411.jpg
20210630_205411.jpg (1.22 MiB) Viewed 6282 times
BODY & HEAD

Excellent sculpting and details. Painted-on skin details such as freckles and veins are subtle, not overdone. No loose primary joints, holds poses well. There is the seam line associated with silicone bodies, but it's not terribly noticeable, especially with this skin tone.
20210630_151654.jpg
20210630_151654.jpg (1.37 MiB) Viewed 6282 times
20210630_154310.jpg
20210630_154310.jpg (942.61 KiB) Viewed 6282 times
Articulated fingers pose well, but no reinforcement at the fingertips; some feel as if the metal could poke through. Potential buyers, be careful with these. I would recommend the manufacturer reinforce the finger "bones" with plastic, especially the tips.
20210630_151739.jpg
20210630_151739.jpg (721.98 KiB) Viewed 6282 times
Standing feet bolts appear to be properly positioned, no issues with the surrounding silicone. Big toe is wired, remaining toes are not.
20210630_152008.jpg
20210630_152008.jpg (816.83 KiB) Viewed 6282 times
Body joints are quite tight, and some take a bit of effort to move. Using leverage is the key, of course. This may improve with time and usage.

As for the softness of this silicone body, the gel breasts feel authentic; the rest of the body feels fairly soft to about 1/2" deep but quite firm beyond that, especially the thighs. I would have preferred her bottom been a bit softer, but it's acceptable to me since she doesn't have a huge "bubble-butt". She feels like a woman in REALLY good shape, almost like an athlete.
20210630_151822.jpg
20210630_151822.jpg (774.55 KiB) Viewed 6282 times
The head shown is the hard silicone version, and it is quite firm, except for the lips. I like the look of the implanted hair, but quite a few strands fell out or were pulled out while combing. I'll keep an eye on this. I also ordered the same head in soft silicone, but it shipped separately and hasn't arrived yet.
20210630_154334.jpg
20210630_154334.jpg (957.22 KiB) Viewed 6282 times
TO BE CONTINUED...

User avatar
sirdave62
Former Member
Posts: 150
Joined: Fri Apr 09, 2021 4:31 pm
Location: Florida - Gulf Coast

My Hedy 171C is here! (Part 2)

Post by sirdave62 »

CONTINUED:

As for her "privates", there is a bit of gape to both holes, but not too bad. It actually looks worse in the photos than in real life. No issues externally or internally so far.
20210630_152413.jpg
20210630_152413.jpg (747.89 KiB) Viewed 6341 times
DEFECTS:

Regrettably, there are a few defects in her skin, but nothing I can't live with. They kind of resemble the scar you sometimes get when you're vaccinated.
20210630_163848.jpg
20210630_163848.jpg (1.1 MiB) Viewed 6341 times
20210630_165553.jpg
20210630_165553.jpg (760.71 KiB) Viewed 6341 times
20210630_205450.jpg
20210630_205450.jpg (1.09 MiB) Viewed 6341 times
CONCLUSION:

Overall, I am quite satisfied with my purchase so far. I think we can all agree the defects were not nearly as bad as we have seen in previous posts. I will certainly post any significant updates or issues, should they occur. Thank you all here at the forum for your welcome and continued support!
20210630_171843.jpg
20210630_171843.jpg (1.32 MiB) Viewed 6341 times

User avatar
deliladoll
Active Member
Active Member
Posts: 161
Joined: Fri Jan 22, 2021 10:35 am
Location: Amsterdam
Contact:

Re: My Hedy 171C is here! (Part 2)

Post by deliladoll »

It's with mixed feelings obviously, but God is she gorgeous.
Wish you both great and happy future.
Authorized fan of Starpery's Hedy ever since February 2021.
Transcending beauty in silicone.

User avatar
sirdave62
Former Member
Posts: 150
Joined: Fri Apr 09, 2021 4:31 pm
Location: Florida - Gulf Coast

Re: My Hedy 171C is here! (Part 2)

Post by sirdave62 »

deliladoll wrote:It's with mixed feelings obviously, but God is she gorgeous.
Wish you both great and happy future.
Thank you, deliliadoll! Glad to hear from you.

Yes, she certainly is gorgeous! :thumbs_up: My photos taken on my phone (Samsung Galaxy Note) do not do her justice! As I am sure you know, phone cameras can distort the image a bit. I think in photos showing only torso and up, her head and breasts appear larger than they actually are. She is actually quite realistically proportioned, on the slim but shapely side. 8)

Her height adds to the realism for me. She is nearly my height (5 foot 9 inches or 1.75 m) while standing on the scale!

However, this does make moving and carrying her a bit more cumbersome. This is actually more of an issue than her weight, because I don't want to frequently bump her fingers or toes while moving her. I was able to do the "fireman's carry" out of the box, and can grab her around the waist to lift and carry short distances. Also in my case, her weight makes her sturdy enough to allow posing, as nearly all her primary joints are fairly tight.

User avatar
sirdave62
Former Member
Posts: 150
Joined: Fri Apr 09, 2021 4:31 pm
Location: Florida - Gulf Coast

Re: My Hedy 171C is here! (Part 2)

Post by sirdave62 »

Hello Everyone,

NEW UPDATE:

I have discovered a couple of other issues while cleaning and powdering her, but still not enough to make me regret my purchase! She's too awesome for that IMHO. :D

LEFT SHOULDER: The joint that allows "shrugging" appears to be loose, left shoulder only, but this is not a feature I would use very often. This is the only loose joint I have found.

RIGHT ARMPIT: Appears to be a clean split/tear in the silicone, along the mold seam line. I do not believe I caused this while posing her, as there is no issue with the left side.

I seem to recall this issue has been previously posted here, and I believe the usual solution is silicone glue. I will check with my vendor.
20210701_112103.jpg
20210701_112103.jpg (772.89 KiB) Viewed 6254 times

User avatar
chachacast
Senior Member
Senior Member
Posts: 399
Joined: Sun May 09, 2021 1:16 pm
Location: The Bayou
Contact:

Re: My Hedy 171C is here!

Post by chachacast »

Congratulations, she looks great

User avatar
chachacast
Senior Member
Senior Member
Posts: 399
Joined: Sun May 09, 2021 1:16 pm
Location: The Bayou
Contact:

Re: My Hedy 171C is here! (Part 2)

Post by chachacast »

thanks for sharing

User avatar
sirdave62
Former Member
Posts: 150
Joined: Fri Apr 09, 2021 4:31 pm
Location: Florida - Gulf Coast

Re: My Hedy 171C is here! (Part 2)

Post by sirdave62 »

chachacast wrote:thanks for sharing
You're welcome!

I am concerned about these issues, but she's still quite a girl! :)

Regarding the split/tear issue, my vendor has advised me to use silicone adhesive, so we'll see how that goes.

User avatar
justintime
Doll Patriarch
Doll Patriarch
Posts: 4383
Joined: Thu Mar 10, 2016 8:19 pm
Location: Exploring the Blue Planet from 100M down
Contact:

Re: My Hedy 171C is here! (Part 2)

Post by justintime »

I would not suggest using silpox.. dries hard/harder.
Try using Permatex windshield and glass adhesive. Worked like a charm on my GT.
Clean the area first, have some painters tape ready to pull the edges together. Wait 24 hours to totally dry. You can remove the tape in an hour.
don't over apply as you would need to clean up excess and could lead to a mess.
Less is better, so you do not squeeze out excess.
“Put … the Doll … down … and slowly back away.”
Shelby My Piece Of Heaven
Shelby Model Information

User avatar
sirdave62
Former Member
Posts: 150
Joined: Fri Apr 09, 2021 4:31 pm
Location: Florida - Gulf Coast

Re: My Hedy 171C is here! (Part 2)

Post by sirdave62 »

FURTHER UPDATE:

My Hedy soft silicone head arrived today:
20210701_140739.jpg
20210701_140739.jpg (1.19 MiB) Viewed 6211 times
I was most impressed how little difference there is between this head and the hard silicone one (soft one is on the right).

However, there is no detail inside the mouth; the opening is narrow and slants upward into her "nasal cavity". Oral capability appears difficult, and could certainly be improved.

Overall, very impressive for a soft silicone head.

User avatar
sirdave62
Former Member
Posts: 150
Joined: Fri Apr 09, 2021 4:31 pm
Location: Florida - Gulf Coast

Re: My Hedy 171C is here! (Part 2)

Post by sirdave62 »

DEFECT UPDATE:

My vendor has recommended using GE2 clear silicone adhesive for the split/tear issue. We'll see how that goes.

Regrettably, other similar issues have developed:

PUBIC AREA, LEFT SIDE: Similar to the armpit issue, also along the seam line, but some material has torn free. The legs have not been overextended to my knowledge.
20210701_155716.jpg
20210701_155716.jpg (873.65 KiB) Viewed 6198 times
I have some excess silicone "flash" from the soft head; I will try filling the gap with scrap silicone and adhesive.

ARTICULATED FINGERS: Finger "bones" have poked through some fingertips on both hands.
20210701_155634.jpg
20210701_155634.jpg (952.27 KiB) Viewed 6198 times
20210701_155652.jpg
20210701_155652.jpg (929.3 KiB) Viewed 6198 times
Finger tips are too soft to prevent this from happening. I recommend some type of plastic or hard silicone coating for the finger "bones".

User avatar
sirdave62
Former Member
Posts: 150
Joined: Fri Apr 09, 2021 4:31 pm
Location: Florida - Gulf Coast

Re: My Hedy 171C is here!

Post by sirdave62 »

chachacast wrote:Congratulations, she looks great
Thanks!

Yes, she does, especially in the "flesh"! 8)

User avatar
sirdave62
Former Member
Posts: 150
Joined: Fri Apr 09, 2021 4:31 pm
Location: Florida - Gulf Coast

Re: My Hedy 171C is here! (Part 2)

Post by sirdave62 »

justintime wrote:I would not suggest using silpox.. dries hard/harder.
Try using Permatex windshield and glass adhesive. Worked like a charm on my GT.
Clean the area first, have some painters tape ready to pull the edges together. Wait 24 hours to totally dry. You can remove the tape in an hour.
don't over apply as you would need to clean up excess and could lead to a mess.
Less is better, so you do not squeeze out excess.
Thank you for the tip! Is this the product you're talking about?

https://www.amazon.com/Permatex-81730-F ... 4602&psc=1

stukov86
Apprentice
Apprentice
Posts: 15
Joined: Fri May 28, 2021 6:55 pm
Contact:

Re: My Hedy 171C is here!

Post by stukov86 »

sirdave62 wrote:Lana has been updated with weight reduction, and weighs in at 75.5 lbs (34.2 kg) according to my scale.
That's awesome. I seem to remember reading that the body was 50kg before.
sirdave62 wrote:The head shown is the hard silicone version, and it is quite firm, except for the lips.
Do you mean the lips are soft? Can I bother you for more info please? Are they pleasant to kiss? Is there any kind of oral cavity (not necessarily one for sex)? I was disappointed by a video of the soft head, that showed no cavity behind her lower lip, just solid silicone.

User avatar
ADHERAQ777
Senior Member
Senior Member
Posts: 486
Joined: Fri Mar 13, 2009 12:00 am
Location: France
Contact:

Re: My Hedy 171C is here!

Post by ADHERAQ777 »

yea for the weight SIlicone has a problem, many Doll Silicone do about 40-45Kg...

Starpery change the new Body 171 may be for have better weight...

For the Skin texture it is nice. Not that on TPE body.
WMDOLLS 140 2018 TPE
Starpery RONG TPE 2021
Teddy Babe 2009 Jessica
4Woods Elina 2011
Doll House 168


Dolls Repair TV : http://www.youtube.com/channel/UCCiI8IS ... /playlists
Dolls Albums : http://www.dollalbum.com/dollgallery/in ... ?cat=11576
Print3D : https://cults3d.com/fr/utilisateurs/Anarkia777/
Artiste 3D : https://www.deviantart.com/anarkia333/gallery

Post Reply

INFORMATIONS