My irontech 169 with Jennifer head has arrived.REVIEW
-
- Doll Advisor
- Posts: 725
- Joined: Sat Mar 24, 2018 4:27 pm
- Contact:
My irontech 169 with Jennifer head has arrived.REVIEW
I opened it and found the 169 body in there which appeared immediately to me as a more slender AYUMI body but with CUP D breasts ( as well made as the F cup breasts of my 6YE 165F that is well separated, pear shaped and looking one or two cup smaller.).
I made the first test which was important to me; to verify if the sex and anus of the 169 are as well copied from nature than the ones of the 168 body? Apparently that should be the case but I have not a 168 body in my possession to be sure of it.
See the picture below where there is no spreading at both holes when the legs are taken apart. Also like on AYUMI pictures I have been impressed by the realistic volume and realistic aspect of her sexual organ.
Here I have taken the old skeleton in order to be able to screw any head I want on the body.Of course here we still have a goose neck of a big diameter (I dont know if it is a bad thing as the advices are divergent) but the body is so easy to manipulate to put the doll in standing position with the very stable legs. They dont have the problematic (crooked legs, arched legs etc) ball articulations on the knees like my two premium 6YE's the 165F and the 169 C cup.
I have choosen light tan skin color, stand feet and hollow breast. There is only a small air Pocket in the breast but they are very soft because the TPE is as soft as the one 6YE used for my 165F.(not my 6YE 169C cup which has a softer (fragile but agreable) TPE)
Jennifer head surprised me on an agreable manner because it is of the larger size (24cm from top head to chin as opposed to the standard size of 22 cm) and has consequently life-sized realistic lips and fit very well such a tall life-sized heavy doll (with however a slender silhouette). I measured 38 kgs as advertised.Congratulations to IRONTECH for adressing this problem of unrealistic too small head sizes used on tall dolls.
The dimensions of the body are as advertised except the legs lenght and the shoulder width.I measured 85 cm for her inner thigh length (exactly like the 6YE 165F) and a shoulder width of 37( not 34) also like the 6YE 165F which balance better and more realistically the upper part of the body with the hips (91 measured like the 6YE 165F)) and the waist (57 measured as the 6YE 165F)
Here however the buttock has slightly less volume than the 6YE 165F in the way of the lower buttock crease which is good.They should be less prone to cracks at the lower crease of the buttocks (like I unfortunately experienced on both my 6YEs dolls lower buttocks crease)
In my opinion and many others the 165F is one of the better realistically sculpted 6YE doll with average realistic body ratios and I have noticed the reassuring resemblance of the 169 body with it including most dimensions.(except the calves diameter, with 29 cm, thinner on the 169)
This Irontech 169 body being also made with almost average realistic body ratios has in my opinion two more qualities than the 165F 6YE. One being that the sexual parts of the body are better made conform to reality (no spreading at both holes which is not the case with 6YE and impressive copy of reality including sex size) The second beeing that Irontech supply some heads of the good size.
On the other end the body muscular details are slightly better on 6YE 165F than on this 169 body. Of course AYUMI 168 body is also better detailled in this respect.Personnaly I like this (the 169) kind of slender very youthful body not affiliated to a fitness club but not fat either, just female and looking fertile.
- SSIrontech
- Manufacturer Affiliated
- Posts: 774
- Joined: Tue Mar 27, 2018 2:18 pm
- Contact:
Re: My irontech 169 with Jennifer head has arrived.REVIEW
We will improve ourselves in the future.Can't wait for more photos from you。
Kind regards
Shane
IronTechDoll
If you have interest in to be our vendor,just contact me.
Email: sales05@irontechdoll.com
Skype: live:.cid.b021968a6ad927ab
Whatsapp/Mobile: 0086-18819425976
-
- Doll Advisor
- Posts: 725
- Joined: Sat Mar 24, 2018 4:27 pm
- Contact:
Re: My irontech 169 with Jennifer head has arrived.REVIEW
On the first you may well see here the slender outline of this well made girl with almost average realistic body ratios.Here she waits at the entrance of the bed. On the second picture she is laying down on the bed. Look at the realistic sex and hips-buttocks outline. On this third picture you may appreciate the well-made buttocks and the good ratio between the shoulder width (37cm) and the hips width corresponding to the 92cm hips circumference. And now surprise ! You have side by side 6YE 165f with standard size head 18 (22cm from head top to chin) and IRONTECHDOLL 169 with Jennifer above standard head (24 cm from head to top chin).On this picture, the fact that head 18 is sensibly too small for these life-sized bodies doesnt appear too much but in reality that is the case.
As I commented earlier both models have about the same well made body with almost realistic ratios except the 6YE is a F cup and the 169 is a D cup and the 169 calf gird is 29 instead of 32 cm. Both body have the same inner thigh lenght of 84-85 cm and the height is only different by 2 cm in favor of Jennifer, one originating from Jennifer larger head size.
The weight I measured is 38 kgs for both.
Personnaly I prefer the D cup of the 169 and her sex structure with no gap holes when legs are taken apart. On the other hand the body of the 165F is slightly more muscular. Note also the light tan color of IRONTECHDOLL compared to the slightly darker medium tan color of 6YE (Spanish color)
- irontechdoll
- Manufacturer
- Posts: 1701
- Joined: Fri Apr 14, 2017 3:30 am
- Contact:
Re: My irontech 169 with Jennifer head has arrived.REVIEW
Best regards
Leonard
Service: service@irontechdoll.com
Website: http://www.irontechdoll.com
10% OFF CODE ON OFFICIAL WEBSITE: Bailey
At the Heart of Irontech Doll, Beats a Passion for Your Pleasure.
Our dedication to craftsmanship, customization, and customer satisfaction sets us apart, offering
an elevated and personalized experience to those seeking companionship and intimacy through love dolls.
-
- Doll Advisor
- Posts: 725
- Joined: Sat Mar 24, 2018 4:27 pm
- Contact:
Re: My irontech 169 with Jennifer head has arrived.REVIEW
The price I paid was higher than what is advertised with shipping included. Indeed I live in EU and I wanted the Customs formalities and taxes to be included in the price on top of the freight cost. So I requested a delivery using UPS SPECIAL LINE SHIPPING like I Always do for all my dolls orders made in China.The price was modified accordingly by Shane during the ordering process at ALI-EXPRESS.
So now I saw Jennifer looking down at me while standing again the foot side of my bed. I feel that she wants to show her legs and buttocks to me
Re: My irontech 169 with Jennifer head has arrived.REVIEW
Thanks!
Vanzo
-
- Doll Advisor
- Posts: 725
- Joined: Sat Mar 24, 2018 4:27 pm
- Contact:
Re: My irontech 169 with Jennifer head has arrived.REVIEW
1.I think that Jennifer head is very well fit for oral sex.
First the head has life-size dimensions with life size lips as well which is very rare.The conduct is big enough and is horizontal.
Second, like AYUMI head, Jennifer head mouth open when you push on the cheeks
2.The positionning of the anal and vaginal hole is indeed a problem for the doggy style sex. Here, the anal hole is too low in the buttocks vertical crease but here that is less serious than most other brands.Here also as you have seen there is no gaping holes when legs are apart which is really a great improvement. Also the sex is copied from nature and has a big realistic volume.
Here is a picture of her anus and sex seen from the back when standing straight: As you can see if the vaginal crevice could go up to the vicinity of the anal hole (that is where the vagina entry would then be) and the anal hole would rise about 3-4 cm more into the buttocks vertical crease we would have a back view on a real female sex.
So far in my collection (12 dolls) only the DH168 161 cup C is anatomically correct and my WMDOLL 168 cup A as well as Jennifer 169 are less incorrect than the other brands.(6YE, JY, ASDOLL...). Oddly enough unlike my 6YE 165F the anal hole of my 6YE 169 C cup is correctly positionned but her vagina is not. IRONTECHDOLL has promised to try to solve this problem in the near future.
-
- Doll Advisor
- Posts: 725
- Joined: Sat Mar 24, 2018 4:27 pm
- Contact:
Re: My irontech 169 with Jennifer head has arrived.REVIEW
Here is the general view of her position: Now a close look from above her buttock; incredibly realistic and erotic as it is copied from nature. Finally a close look at her openings. There are no gaping holes. The sex has a large realistic volume and life-like details. The anal hole is perfectly realistic also.Except for the holes positionning everything is realistic and erotic.
Re: My irontech 169 with Jennifer head has arrived.REVIEW
come on irontech! please correct it!
- haremlover
- Doll Visionary
- Posts: 16238
- Joined: Tue May 26, 2009 12:00 am
- Location: UK and South of France
- Contact:
Re: My irontech 169 with Jennifer head has arrived.REVIEW
I'm hoping to hear good things from Leonard in due course.
Best wishes
Harem
Chloé's book
is available from The-Doll-House
- - - -
Here's Coverdoll Yolanda
- - - -
Reviews for:
-DS-OR-JY-SY-Jarliet-Vivid-SM-SE-ZOne-JM-Sino-Sanhui-Pipedream--XY-WM-Elsa Babe-SM Silicone Siliko-XYcolo-Starpery-Elsa Babe-FutureDoll-Zelex-Irontech-FJ Doll
- - - -
YouTube Doll Review Channel
-https://www.youtube.com/@sexdoll-reviews-
- SSIrontech
- Manufacturer Affiliated
- Posts: 774
- Joined: Tue Mar 27, 2018 2:18 pm
- Contact:
Re: My irontech 169 with Jennifer head has arrived.REVIEW
We always know this problem,we will improve and correct it soon.coolumbia wrote:thank you and i really appreciate the time you have put in to take these photos. Unfortunately for me she's now off my list purely due to the placement of the 'goods'.
come on irontech! please correct it!
Kind regards
Shane
IronTechDoll
If you have interest in to be our vendor,just contact me.
Email: sales05@irontechdoll.com
Skype: live:.cid.b021968a6ad927ab
Whatsapp/Mobile: 0086-18819425976
-
- Doll Advisor
- Posts: 725
- Joined: Sat Mar 24, 2018 4:27 pm
- Contact:
Re: My irontech 169 with Jennifer head has arrived.REVIEW
If and when the positionning of holes is rectified on remarquable bodies like AYUMI 168 and JENNIFER 169 which are so agreable to "play" with I will buy another one examplar for sure.
-
- Doll Advisor
- Posts: 725
- Joined: Sat Mar 24, 2018 4:27 pm
- Contact:
Re: My irontech 169 with Jennifer head has arrived.REVIEW
What list of dolls have you where the holes are correctly positionned I think that is rare ?In the tall dolls (160cm and above) I personnaly found only one so far that is the DH168 161 cup C (that is not an evo skeleton)But on DH168 156 evo, the holes are again not correctly positionned.
-
- Doll Advisor
- Posts: 725
- Joined: Sat Mar 24, 2018 4:27 pm
- Contact:
Re: My irontech 169 with Jennifer head has arrived.REVIEW
Seen standing from forward the female sexual organ is almost not visible. Only the start of the crevice is visible as you may see on the picture of the anatomically correct DH168 161 cup C with LILLIAN head.That is generally the same in real life but there are some exceptions Her Bottom looks like that when standing.The vaginal opening is located at the horizontal creaze of the buttocks while the anal hole is 4 to 5 cm above Here you see the pictures of the (both not anatomically correct but very sexy) 6YE 165F head 18 and Irontechdoll Jennifer 169 and you may notice that their big sex is visible almost along the crevice full lenght.That is not realistic in average but I must recognize that it is quite erotic.It is also easier in this case to penetrate when standing. Personnaly I prefer the anatomically correct case but I wouldnt be surprised that some readers could prefer the other ones.
Could it be possible to combine both sexy forward and back views with an anatomically correct positionning of the holes? Yes but the doll maker must in that case make a mould of a realistic female sex of large volume including a long crevice as there are many in nature .
-
- Doll Advisor
- Posts: 725
- Joined: Sat Mar 24, 2018 4:27 pm
- Contact:
Re: My irontech 169 with Jennifer head has arrived.REVIEW
Amongst my collection of 12 dolls I must admit that she has the more realistic and erotic buttocks of them all.The hips circumference of 91-92 cm is the real measurement of AYUMI hips ( not the 94-96 cm used for the AYUMI 168 body).Here one really feel that it is a natural shape especially as IRONTECHDOLL TPE is as soft as 6YE TPE.Look also at her beautifull large eyes