Elsababe head on Irontech dollls?
Elsababe head on Irontech dollls?
-
- Active Member
- Posts: 135
- Joined: Fri Mar 17, 2023 12:40 pm
- Contact:
Re: Elsababe head on Irontech dollls?
- Justinpassinthru
- Doll Advisor
- Posts: 927
- Joined: Fri Apr 10, 2020 4:17 pm
- Contact:
Re: Elsababe head on Irontech dollls?
Re: Elsababe head on Irontech dollls?
And the IronTech dolls I have use a standard M16 connector.
Anyone know if IronTech and Elsa Babe are made in the same factory? I'd bet that Elsa Babe does not have their own. Don't know about IronTech. I notice that both IronTech and WM upgraded their factories at roughly the same time.
Re: Elsababe head on Irontech dollls?
As far as I know IT is chinese and EB is japanese, so I doubt their dolls are made in the same factory. And for EB I had read that they don't like to mix their heads with other brand dolls, so the head connector is unique. Now I can be mistaken, so it would be nice if an owner of both an IT and EB could confirm us if its possible to put them togethertoddjy wrote: ↑Tue Apr 16, 2024 5:22 pm I just checked on the unapproved but reputable dealer Doll Channel. He has some stock heads, including a couple of Elsa Babes. The page claims it's an M16 connector.
And the IronTech dolls I have use a standard M16 connector.
Anyone know if IronTech and Elsa Babe are made in the same factory? I'd bet that Elsa Babe does not have their own. Don't know about IronTech. I notice that both IronTech and WM upgraded their factories at roughly the same time.
- Justinpassinthru
- Doll Advisor
- Posts: 927
- Joined: Fri Apr 10, 2020 4:17 pm
- Contact:
Re: Elsababe head on Irontech dollls?
Re: Elsababe head on Irontech dollls?
Really? Thats great, I would really appreciate itJustinpassinthru wrote: ↑Tue Apr 16, 2024 7:19 pm I have both but I'd have to pull them out of storage to check. I'm almost 100% certain the EB head has a welded in M16 bolt. Irontech uses an M16 bolt for sure.
- Justinpassinthru
- Doll Advisor
- Posts: 927
- Joined: Fri Apr 10, 2020 4:17 pm
- Contact:
Re: Elsababe head on Irontech dollls?
I checked the EB head and it is for sure a quick connect M16. It's welded into the head, so there's no removing the actual connector, but it would most definitely attach to an IT body.Aleferr wrote: ↑Tue Apr 16, 2024 7:29 pmReally? Thats great, I would really appreciate itJustinpassinthru wrote: ↑Tue Apr 16, 2024 7:19 pm I have both but I'd have to pull them out of storage to check. I'm almost 100% certain the EB head has a welded in M16 bolt. Irontech uses an M16 bolt for sure.
I also attached it to my Jarliet silicone doll without any problem.
Re: Elsababe head on Irontech dollls?
Great, thanks a lot!Justinpassinthru wrote: ↑Tue Apr 16, 2024 9:36 pmI checked the EB head and it is for sure a quick connect M16. It's welded into the head, so there's no removing the actual connector, but it would most definitely attach to an IT body.Aleferr wrote: ↑Tue Apr 16, 2024 7:29 pmReally? Thats great, I would really appreciate itJustinpassinthru wrote: ↑Tue Apr 16, 2024 7:19 pm I have both but I'd have to pull them out of storage to check. I'm almost 100% certain the EB head has a welded in M16 bolt. Irontech uses an M16 bolt for sure.
I also attached it to my Jarliet silicone doll without any problem.