Yes, I received your photos, thank you very much!
One of the best doll stands in the market, REVIEW
Re: One of the best doll stands in the market, REVIEW
Our website: https://www.coeros.com/
E-mail: service@coeros.com
Follow Coeros On: Youtube| Twitter | Reddit | Instagram
You can find related products on the official website, and related tutorials can be found in YouTube and TDF.
Re: One of the best doll stands in the market, REVIEW
No, it is the the neck only stand.
Re: One of the best doll stands in the market, REVIEW
Hello, please rest assured that the base of the Only Neck Grip Stand is compatible with the Dual Function Stand.
If you need, I can sell you the upper part of the Dual Function Stand separately. Best regards,
Coeros
Our website: https://www.coeros.com/
E-mail: service@coeros.com
Follow Coeros On: Youtube| Twitter | Reddit | Instagram
You can find related products on the official website, and related tutorials can be found in YouTube and TDF.
Re: One of the best doll stands in the market, REVIEW
How much will that cost and how would I pay for it? PayPal is what I used on your web site.
Re: One of the best doll stands in the market, REVIEW
The cost will be roughly one-third of the price of the 3-in-1 Doll Display Stand. I will calculate the specific amount and send you a private message with the details.
Our website: https://www.coeros.com/
E-mail: service@coeros.com
Follow Coeros On: Youtube| Twitter | Reddit | Instagram
You can find related products on the official website, and related tutorials can be found in YouTube and TDF.
Re: One of the best doll stands in the market, REVIEW
Re: One of the best doll stands in the market, REVIEW
I have not tried to be honest. As ZELEX told me I will not be able to remove the head bolt from the head, it will damage the head base.
Only one solution for this, but I have not tried though. In theory, it should work, but it is better to let Coeros confirm it. Coeros did mention it in another thread here.
- johnmagicnl
- Active Member
- Posts: 178
- Joined: Sat Mar 25, 2023 7:56 am
- Location: Netherlands
- Contact:
Re: One of the best doll stands in the market, REVIEW
Zelex SLE 172 +201 head
Re: One of the best doll stands in the market, REVIEW
The new ZELEX SLE has the latest EXP skeleton with an upgraded neck connector, it should be able to handle this.johnmagicnl wrote: ↑Thu Feb 01, 2024 8:50 am Thank you for your answwer. Yes Coeros already confirmed your method mentioned, but only to be used as a stand and not for lifting the doll or storing it like this. I Did DM you, because I thought you might have found a way to overcome this problem. Thank you both, Coeros and KKFun for your quick replies.
viewtopic.php?t=169324
- johnmagicnl
- Active Member
- Posts: 178
- Joined: Sat Mar 25, 2023 7:56 am
- Location: Netherlands
- Contact:
Re: One of the best doll stands in the market, REVIEW
This is great news, I did not know that. The Zelex doll I ordered hass the new EXP as far as I know!KKFun wrote: ↑Thu Feb 01, 2024 9:04 am
The new ZELEX SLE has the latest EXP skeleton with an upgraded neck connector, it should be able to handle this.
viewtopic.php?t=169324
You made my day!
Zelex SLE 172 +201 head
Re: One of the best doll stands in the market, REVIEW
So.. Is the best option for a SLE 172 a 2-in-1 doll stand for posing and photo sessions?KKFun wrote: ↑Thu Feb 01, 2024 9:04 amThe new ZELEX SLE has the latest EXP skeleton with an upgraded neck connector, it should be able to handle this.johnmagicnl wrote: ↑Thu Feb 01, 2024 8:50 am Thank you for your answwer. Yes Coeros already confirmed your method mentioned, but only to be used as a stand and not for lifting the doll or storing it like this. I Did DM you, because I thought you might have found a way to overcome this problem. Thank you both, Coeros and KKFun for your quick replies.
viewtopic.php?t=169324
Amazing photoshots btw
SMdoll 'Tiffany'
TAYU 148D+ Ivy 'Pamela'
Re: One of the best doll stands in the market, REVIEW
For photos, I would say that the motorized doll stand is the best. However, the motorized doll stand needs the back hanging hole for mounting, or uses the neck bolt.MrDrum81 wrote: ↑Sat Feb 03, 2024 5:21 amSo.. Is the best option for a SLE 172 a 2-in-1 doll stand for posing and photo sessions?KKFun wrote: ↑Thu Feb 01, 2024 9:04 amThe new ZELEX SLE has the latest EXP skeleton with an upgraded neck connector, it should be able to handle this.johnmagicnl wrote: ↑Thu Feb 01, 2024 8:50 am Thank you for your answwer. Yes Coeros already confirmed your method mentioned, but only to be used as a stand and not for lifting the doll or storing it like this. I Did DM you, because I thought you might have found a way to overcome this problem. Thank you both, Coeros and KKFun for your quick replies.
viewtopic.php?t=169324
Amazing photoshots btw
ZELEX SLE has the welded-in neck bolt, and it is pre-configured, hence, I could not have the back hanging hole installed. If you can install the neck bolt accessory, it would still work with the motorized doll stand.
Under this situation, the 2-in-1 doll stand is a very decent choice without any modification.
Thanks for the kind comments.
- DocWen
- Doll Mentor
- Posts: 1563
- Joined: Sat Jun 06, 2020 3:27 pm
- Location: Under your bed! Boo!
- Contact:
Re: One of the best doll stands in the market, REVIEW
However, the packaging for it is lacking. Here's the pictures of it when it arrived. I was worried that it was incomplete. Pieces of it were literally hanging out of the box. Internal packing was almost nonexistent. Luckily, everything is nicely wrapped in bubble wrap and it was all there. But because it's so heavy and there is some much empty space within the box, the contents get to moving around a lot and splitting the box.
I will say, though, that the stand is AWESOME. Thanks, Coeros!!
DocWen
Never give up! Never surrender! - Jason Nesmith
Proud companion of Etsuko (MLW 148b) and Anjelica (XT Doll 163F)
Previous companion of SE Doll 151e, WM 157b, Piper Doll Phoebe, Piper Doll Phoebe Elf, another WM 157b, Zelex 155c, Happy Doll Dagmar and a few others I don't recall.
Re: One of the best doll stands in the market, REVIEW
Your welcome, and thanks for the answer it possible to stand the doll 180 degree turn, so it would be possible to take pictures from her back in the 2-1 stand?KKFun wrote: ↑Sat Feb 03, 2024 10:20 amFor photos, I would say that the motorized doll stand is the best. However, the motorized doll stand needs the back hanging hole for mounting, or uses the neck bolt.MrDrum81 wrote: ↑Sat Feb 03, 2024 5:21 amSo.. Is the best option for a SLE 172 a 2-in-1 doll stand for posing and photo sessions?KKFun wrote: ↑Thu Feb 01, 2024 9:04 amThe new ZELEX SLE has the latest EXP skeleton with an upgraded neck connector, it should be able to handle this.johnmagicnl wrote: ↑Thu Feb 01, 2024 8:50 am Thank you for your answwer. Yes Coeros already confirmed your method mentioned, but only to be used as a stand and not for lifting the doll or storing it like this. I Did DM you, because I thought you might have found a way to overcome this problem. Thank you both, Coeros and KKFun for your quick replies.
viewtopic.php?t=169324
Amazing photoshots btw
ZELEX SLE has the welded-in neck bolt, and it is pre-configured, hence, I could not have the back hanging hole installed. If you can install the neck bolt accessory, it would still work with the motorized doll stand.
Under this situation, the 2-in-1 doll stand is a very decent choice without any modification.
Thanks for the kind comments.
SMdoll 'Tiffany'
TAYU 148D+ Ivy 'Pamela'
Re: One of the best doll stands in the market, REVIEW
180 degree turn is possible, I have done it with this photo. I took the photo of her back while using the 2-in-1 stand. Obviously, the waist support was used for her front belly.MrDrum81 wrote: ↑Sat Feb 03, 2024 11:51 amYour welcome, and thanks for the answer it possible to stand the doll 180 degree turn, so it would be possible to take pictures from her back in the 2-1 stand?KKFun wrote: ↑Sat Feb 03, 2024 10:20 amFor photos, I would say that the motorized doll stand is the best. However, the motorized doll stand needs the back hanging hole for mounting, or uses the neck bolt.MrDrum81 wrote: ↑Sat Feb 03, 2024 5:21 amSo.. Is the best option for a SLE 172 a 2-in-1 doll stand for posing and photo sessions?KKFun wrote: ↑Thu Feb 01, 2024 9:04 amThe new ZELEX SLE has the latest EXP skeleton with an upgraded neck connector, it should be able to handle this.johnmagicnl wrote: ↑Thu Feb 01, 2024 8:50 am Thank you for your answwer. Yes Coeros already confirmed your method mentioned, but only to be used as a stand and not for lifting the doll or storing it like this. I Did DM you, because I thought you might have found a way to overcome this problem. Thank you both, Coeros and KKFun for your quick replies.
viewtopic.php?t=169324
Amazing photoshots btw
ZELEX SLE has the welded-in neck bolt, and it is pre-configured, hence, I could not have the back hanging hole installed. If you can install the neck bolt accessory, it would still work with the motorized doll stand.
Under this situation, the 2-in-1 doll stand is a very decent choice without any modification.
Thanks for the kind comments.
viewtopic.php?t=176078&start=1