Sex with a Teddy Babe - finally fixed!
Sex with a Teddy Babe - finally fixed!
The other week I had an idea for one more final experimental insert to see if I could make things better. I own Venus 2000 machine and I wondered if I could use the receiver part of the machine as an insert. For those not familiar with the Venus machine ‘the receiver’ is a clear plastic tube with a latex tube or sheath liner stretched through it and folded over each end with an endcap with air valves. Initial experiments proved promising but the receiver was too long and also has a nozzle for an air tube for use with the Venus, both of things prevented it from being fully inserted into the Teddy Babe.
A quick search on eBay yielded a similar plastic tube for just £6.50, and that included delivery from China to the UK!, worth a go I thought. When the tube arrived, I cut the length down so it would comfortably fit in the Teddy Babe and also drilled some small air holes. I then added some Venus 2000 liner and a Venus end cap. The result was as in photos attached.
So to the first test . . . with insert in the Teddy Babe I tried the missionary position, it was very intense and hence quite a short test Basically this really works and in my opinion has transformed the Teddy Babe. It won’t make positions that have always been impossible with the Teddy Babe such as the spoons position possible but it does make the normal positions such missionary, doggy and cowgirl (and its derivatives) much more realistic, intense and enjoyable.
The reason it works so well is down to a few things I think; the plastic tube which maintains the integrity of the insert even with body weight on it, the soft skin like latex liner with its very subtle texture and the air valves in the end cap causing the liner to grip the inserted penis. As with the Venus 2000 the liner can be configured in numerous ways to give the feeling of a tight virgin or the rather more mature lady, whatever is your preference.
As I had Venus 2000 spares all this cost me was a plastic tube from eBay and was very worth doing. I realise not many people have a Venus 2000 machine but the latex liner and the end cap are available as spares from the manufacturer and don’t cost a fortune, the plastic tube is available from many other sources including eBay.
I hope this helps anybody who has been looking for a bit more than cuddles from their Teddy Babe and has been disappointed.
- terranova
- Contributing Poster
- Posts: 25
- Joined: Sun Nov 24, 2019 10:44 am
- Location: United Kingdom
- Contact:
Re: Sex with a Teddy Babe - finally fixed!
I particularly like the thought of the looser fit of this design, rather than the usual tight inserts available these days.
TN.
- DocMoriarty
- Doll Mentor
- Posts: 1134
- Joined: Sat Jul 08, 2017 11:15 am
- Location: Germany, Munich in a heavy doll infested apartment
- Contact:
Re: Sex with a Teddy Babe - finally fixed!
Specials: May 2024 Cat FAB Challenge “Plushies in Motion”, Oktoberfest 2023 Special Report in Petra's Thread
Left to Right: Ronda - Florina Valentina - 2018-11-12 * Petra - Happy Doll 165D - 2023-08-14 * Michelle - Happy Doll 165E/Irontech S27 - 2024-04-23 * Roxi - Teddy Babe Deluxe Diana - 2020-07-20 * Anette - Teddy Babe Deluxe Lisa - 2018-09-04
Re: Sex with a Teddy Babe - finally fixed!
Re: Sex with a Teddy Babe - finally fixed!
Re: Sex with a Teddy Babe - finally fixed!
Hanna: viewtopic.php?t=161099
Zhen: viewtopic.php?t=160371
Sam: viewtopic.php?t=160188
Lapis: viewtopic.php?p=2251699#p2251699
Lulu: viewtopic.php?t=141384
Selene: viewtopic.php?t=178008
Emma: viewtopic.php?t=181473
-
- Doll Elder
- Posts: 2685
- Joined: Fri Dec 21, 2012 3:05 am
- Location: California
- Contact:
Re: Sex with a Teddy Babe - finally fixed!
You must be an engineer. Good solution to the tightness problem caused by the poly-fill.
You may want to include the tube assembly in the clear plastic bag for easier insertion and retrieval.
May I ask please: what is the tube outside diameter? I am guessing 2 inches, about 5.1 cm.
Be careful. Repeated use of this thing may cause delirium / mumbling to yourself, profusely thanking your Babe.
- Joe Bin
- Doll Elder
- Posts: 2537
- Joined: Fri Feb 03, 2012 11:19 pm
- Location: Vancouver Island. BC CANADA
- Contact:
Re: Sex with a Teddy Babe - finally fixed!
The latex liner wouldn't work to good for me though. Latex has a habit of disintegrating when it comes in contact with my skin for any length of time.
http://www.dollalbum.com/dollgallery/in ... ?cat=13590
And http://dollforum.com/forum/viewtopic.php?f=34&t=40240
Re: Sex with a Teddy Babe - finally fixed!
Yes you are right, it is a 2 inch diameter tube however that might need to be a different dia if the Venus 2000 liner you are using is different.Missionary wrote: ↑Wed Nov 08, 2023 1:12 amYou must be an engineer. Good solution to the tightness problem caused by the poly-fill.
You may want to include the tube assembly in the clear plastic bag for easier insertion and retrieval.
May I ask please: what is the tube outside diameter? I am guessing 2 inches, about 5.1 cm.
Be careful. Repeated use of this thing may cause delirium / mumbling to yourself, profusely thanking your Babe.
-
- Active Member
- Posts: 106
- Joined: Sun Feb 05, 2023 8:44 pm
- Contact:
Re: Sex with a Teddy Babe - finally fixed!
-
- Doll Elder
- Posts: 2685
- Joined: Fri Dec 21, 2012 3:05 am
- Location: California
- Contact:
Re: Sex with a Teddy Babe - finally fixed!
I am not feverdream, but I shall post my experiences here as a public service.feverdream wrote: ↑Wed Nov 22, 2023 2:48 pm Any chance you could post a step by step guide what to buy and how to build this?
If you notice, insert type Silicone and TPE Dolls have a receptacle with solid walls, while TBD have plushy walls with poly-fill applying extra pressure on the insert.
The purpose here is to introduce a solid wall to eliminate the extra pressure where needed.
Please, note that the Babe shown is a 2017-year Model Teddy Babe, she volunteered to remain nameless. Please note the luscious Boobs.
I first applied this method in 2013. Your experience may be different.
First item is to buy a 2.5-inch type vacuum extender and cut off 6" length section from the smaller end. Please remove burrs and sharp edges.
Insert the small end into a plastic bag supplied by 8thW and insert this assembly into your Babe.
Your favorite silicone insert goes into the pink pouch, that will slide into the tube.
Use your favorite lube only inside the silicon insert. Now you are ready for action.
If the setup is too tight for you, use a thinner insert, or cut-off the other end of the extender wand and use it. It is a ,25" larger.
- You have more work to make the insertable end smooth.
First proto shows Inserting tool, insert, pink pouch and drying stick.
Here are the photos:
- Joe Bin
- Doll Elder
- Posts: 2537
- Joined: Fri Feb 03, 2012 11:19 pm
- Location: Vancouver Island. BC CANADA
- Contact:
Re: Sex with a Teddy Babe - finally fixed!
Who makes that particular silicone insert, and where are they sold ?
http://www.dollalbum.com/dollgallery/in ... ?cat=13590
And http://dollforum.com/forum/viewtopic.php?f=34&t=40240
-
- Doll Elder
- Posts: 2685
- Joined: Fri Dec 21, 2012 3:05 am
- Location: California
- Contact:
Re: Sex with a Teddy Babe - finally fixed!
But there are several Doll vendors selling similar inserts that i will be looking at also. I like them smooth and soft on the inside. I unplugged them so they are open ended, The suction was too intense for me. Hope TDF members can recommend us heavenly inserts. The Demon guy had nothing useful.
- Joe Bin
- Doll Elder
- Posts: 2537
- Joined: Fri Feb 03, 2012 11:19 pm
- Location: Vancouver Island. BC CANADA
- Contact:
Re: Sex with a Teddy Babe - finally fixed!
http://www.dollalbum.com/dollgallery/in ... ?cat=13590
And http://dollforum.com/forum/viewtopic.php?f=34&t=40240
-
- Doll Elder
- Posts: 2685
- Joined: Fri Dec 21, 2012 3:05 am
- Location: California
- Contact:
Re: Sex with a Teddy Babe - finally fixed!
I came across this recommendation. I will check it out asap: I tried an insert from a Zelex Doll which fits quite good.Joe Bin wrote: ↑Tue Nov 28, 2023 5:29 pm Thank you Missionary for that info. I am still looking for a decent insert for my C18 Taffy, but will soon need something for my TB as well. I have been happy with the silliplush insert she came with, but it is almost wore'n out. I'm pretty sure they don't make the silliplush anymore.
Jeff / Booty call dolls is Zelex Vendor.