Cracking?
-
- Inactive
- Posts: 11
- Joined: Mon Apr 15, 2019 10:42 pm
Re: Cracking?
- Dutch Dance Maniac
- Doll Mentor
- Posts: 1123
- Joined: Sat Jun 23, 2018 3:57 pm
- Location: The Netherlands. Electronic Dance Music Country number 1 !!!
- Contact:
Re: Cracking?
We Just fuck our lady like you do.......Dollarhyde wrote:What the heck are you guys doing none of my ladies ever experienced that with the exception of the occasional finger poke which I generally do outpatient surgery with a soldering iron.Dutch Dance Maniac wrote:Timea was only 4 months old....... When that crack started.ColColt wrote:I'll watch some of his work and see how he does it. That doesn't guarantee I'll have the equipment/knowledge he does but I need to do something before this stretches further. She's only about six months old.
It's a Weakness / failure in the mold designs they use, they never did modifications to make that erea stronger against tearing.
Expensive brand dolls and cheap copy dolls they all have the same problem. Doesn't matter if its a brand doll of not...... You see it now...... You and I have a real wm doll but she also started tot tear.....
So where's the wm high quality now ??? Tell me...... TDF, Vendors and so on....... i can't see it..... You do see it ??
Do not use a heatgun but a iron. A heatgun spreads tot much Heat arround the non damaged erea, and makes even more damage..
With a solder iron you keep this Heat at a minimum.and work local. And most important...... Put the body in a minimum stress position. Mold position.....
First start practice lessons on sample tpe....... learn with a solder iron to fuse fresh tpe in a crack you made on the sample tpe. After a few lessons give it a try....... That's how i did it myself........ And It works.
Gooduck.
Anyway, I am glad someone had the same issue and is able to help ColColt...
A engineer at the factory would say.......... About the tearing........ The costumer fucked the doll 24/7 like they told me as reason....... It's Just a briljant excuse to close the case. It's all a Joke......
These dolls are sold as sexdolls and you may expect they Will survive atleast a year lifespan......
Many are tearing already after a few months...... So there's seriously something wrong here,,.......
Warranty ?? Does it excisist ?? It should be for a 2000 dollar product,. But hey it's all mass production from China and they see things different then we in the west see Them.
I've learned my lesson....... Never a expensive brand doll anymore becouse a copydoll has the same lifespan for less dollars,. If needed i buy a new one after a few months for just 500 dollar,. So with other words,. You can have 4 dolls for 2000 dollar to get a full year lifespan that a brand doll can't deliver becouse they start also tearing after a few months........ Think about IT.......
Yeah it's a strange world we live in........
We fuck dolls and the factory's fuck us if the doll fails and start tearing after a few months......
Daisy. WM163C #162
Mariëlle. DutchDoll 148-CM
However Unreal This May Be...... We Are Connected You And I.
We Are On The Same Curve, Point Of All Is:
We Share The Same Secret. We Love Our Dolls And Our LifeStyle.
That Makes Us Who We Really Are. Pure, Loving and Caring.
Welcome Into Our World.
- StormiLover
- ~ Member ~
- Posts: 2938
- Joined: Mon Jan 07, 2019 1:07 am
- Location: Alberta, Canada
- Contact:
Re: Cracking?
Well I can see this has hit a nerve. When it happens, or if, I don't know what I will do. I'm so happy right now, I just can't imagine it happening. I will have to be in denial till then.
Sorry it happened to your doll.
The Mis-Adventures of Stormi And SL
Stormis Big Adventures
A Stormi Introduction
Stormi's photo Albums
- Arthur1960
- Doll Visionary
- Posts: 13999
- Joined: Fri Feb 24, 2017 1:44 pm
- Location: Suffolk, UK
- Contact:
Re: Cracking?
viewtopic.php?f=215&t=90044
Sarah
viewtopic.php?f=215&t=106417
Sophia:
viewtopic.php?f=224&t=89060
Athena:
viewtopic.php?f=215&t=93767
Monique
viewtopic.php?f=212&t=87519
Keiko
viewtopic.php?f=215&t=89419
Shuri
viewtopic.php?f=215&t=98819
- -Ragnar66-
- Doll Guru
- Posts: 5972
- Joined: Wed Mar 20, 2019 7:19 pm
- Location: Germany
- Contact:
Re: Cracking?
Re: Cracking?
I don't use her every day, maybe once a week if even. I've had her for over a year now, with minimal use, as there were a few months I never touched her because I've been hooked on a video game for a few months, lol.
Most of the time, she is standing normally, so her legs aren't constantly spread open, though I do spread her legs when we consummate.
I think it's best to relegate her to a dress up doll once in a while and fondle, uh, I mean cuddle lol.
She does have some minor TPE issues I need to fix though, but it seems the TPE in this area is going to need constant care.
I guess everyone here will just need to be vigilant with wide spread issues and take precautions.
To me, these dolls are still very well made and look incredible. Over time, they will only get better. Just know what you are getting into and accept the responsibility of taking care of these dolls. They're not toys, but something special all together.
Re: Cracking?
Perhaps it's nothing I did but just a weak area on most if not all dolls. I've seen girls posed in a host of positions that I've never had Rachael in for fear of tearing something. She's pretty much been "babied" other than the occasional roll in the hay with her. She's never been on her knees even as I can't move her upper body backwards to facilitate that position so, it's been an upper body movement toward her knees, as in tying her shoes only as for body movement. I have pushed her legs back while on her back, and then spread them a bit but not what I call "east to west" as you've seen in some of the Piper girls.
The photo shows what she looked like new when I got her the end of July last year so, I guess I've had her now eight months but, I saw this before now and just cleaned the area of powder and then put a bit of Vaseline on her.
- Dollarhyde
- Doll Oracle
- Posts: 8441
- Joined: Sat Jul 02, 2011 9:22 pm
- Location: The Tardis Somewhere In the Timey Wimey
- Contact:
Re: Cracking?
http://www.dollalbum.com/dollgallery/in ... ?cat=13267
"Dammit Jim I'm a doctor, not a doll maker!"
Re: Cracking?
What's to say even at that, that it won't happen again afterwards?
- Jimmy_71
- Doll Patriarch
- Posts: 3852
- Joined: Sun Sep 09, 2018 9:37 am
- Location: Quebec, Canada
- Contact:
Re: Cracking?
Karissa (Zelex SLE 172E with head 204)
Karine (WM158D / #273)
MG (WM172G)
Anya (WM172D Gel / #370)
Andrea & Veronica (WM172D Hollow / #370 & #S19 shared body)
Patricia & Tatiana (WM166C / #252 & #266 shared body)
Alyssa & Isabelle (WM158D / #74 & #162 shared body)
Karissa's Thread
Jimmy's WM Babes
Link To Their Old Threads
Link To Their Photo Albums
Link To Their Instagram
- Arthur1960
- Doll Visionary
- Posts: 13999
- Joined: Fri Feb 24, 2017 1:44 pm
- Location: Suffolk, UK
- Contact:
Re: Cracking?
viewtopic.php?f=215&t=90044
Sarah
viewtopic.php?f=215&t=106417
Sophia:
viewtopic.php?f=224&t=89060
Athena:
viewtopic.php?f=215&t=93767
Monique
viewtopic.php?f=212&t=87519
Keiko
viewtopic.php?f=215&t=89419
Shuri
viewtopic.php?f=215&t=98819
Re: Cracking?
I use to cast big 540 grain .45 caliber bullets for my buffalo rifle and had some of the lead splatter on the back of my hand at 750F. I can say up front, that's some kind of hot. It left a scar. I hated using gloves but that would have saved me a good burn.
- -Ragnar66-
- Doll Guru
- Posts: 5972
- Joined: Wed Mar 20, 2019 7:19 pm
- Location: Germany
- Contact:
Re: Cracking?
I´d guess Mishka (or someone else) would have an answer, if you´d just ask.ColColt wrote:I just watched his video and he's mostly repairing deeper cuts than I have. I wonder if he'd use the same methods/equipment for this...the heat gun bothers me using it in the area Rachael's problem is located. 400 degrees C is mighty hot!! Even his soldering tool is set to 200C. That's nearly 400 degrees Fahrenheit.
I use to cast big 540 grain .45 caliber bullets for my buffalo rifle and had some of the lead splatter on the back of my hand at 750F. I can say up front, that's some kind of hot. It left a scar. I hated using gloves but that would have saved me a good burn.
viewtopic.php?f=7&t=101220
- Dutch Dance Maniac
- Doll Mentor
- Posts: 1123
- Joined: Sat Jun 23, 2018 3:57 pm
- Location: The Netherlands. Electronic Dance Music Country number 1 !!!
- Contact:
Re: Cracking?
My worktools.......
30 watt solder iron. SMD Station.....
White Mineral Oil 100% clear.
Spare block Tan TPE. 18x14x3,5 cm. This process need to be done over and over again...... you need to do it layer by layer to fill the gap / tear again......... Stretch Test........ Looks good..... no air bubbles. After endless fuse sessions the gap has been re-filled..... And finaly...... lets do a stretch test again....... Looks good......... (only the crater erea needs a littlebit more tpe, then its perfect.) Strong enough and 1000 times better then using TPE solvent. The TPE has back again the natural stengh........
Solvent can not give you this result on the long term..... I call it now TPE destroyer, becouse it will destroy tpe on the long term....... I will never use solvent anymore for fixing damage........ I know now what it does with TPE in high stress erea's....... becouse i've seen it all in the past.
Heat repair can and will do that job were you can trust on the long term !!! So people who say can't be done............ Well here's how i think about it........ Can't be done does not exists......
Can i Fix my Timea's groin tear Damage ?? Yes i can.......... Practice, practice, practice and patience....... But nothing is impossible with the right knowledge, skills and passion.
Like i said before........ I'm working in the background to fix Timea's groin damage again, and when i'm done she will be stronger in the groin erea then she ever was....... The way it should be if they did re-design the mold in the factory's so groin tearing belongs to the past...... If you want the best....... Well you need to do it all yourself......
Greetings the dutchman and his girls.
Daisy. WM163C #162
Mariëlle. DutchDoll 148-CM
However Unreal This May Be...... We Are Connected You And I.
We Are On The Same Curve, Point Of All Is:
We Share The Same Secret. We Love Our Dolls And Our LifeStyle.
That Makes Us Who We Really Are. Pure, Loving and Caring.
Welcome Into Our World.