Tear in the "Clinical Perineum" aka between the vagina & ass
-
- Apprentice
- Posts: 15
- Joined: Thu Sep 13, 2018 7:16 pm
- Contact:
Tear in the "Clinical Perineum" aka between the vagina & ass
This is obviously a common problem with these I assume. So any ideas how to actually fix this problem?
It has officially torn between the area (since now it just has been progressively getting worse with no permanent solution from TPE glue.
I'd almost be willing to send it somewhere to get fixed, but the shipping costs are probably not worth it. I like the doll. Would be cool to get it fixed.
Any ideas?
Re: Tear in the "Clinical Perineum" aka between the vagina &
-
- Apprentice
- Posts: 15
- Joined: Thu Sep 13, 2018 7:16 pm
- Contact:
Re: Tear in the "Clinical Perineum" aka between the vagina &
amytyl wrote:My oldest TPE doll is 3 and a half years old and due to frequent use that battle was long lost, despite much repair work. If you can find an insert with an attached labia (the old WM 153 ones were perfect!) that can help cover it.
Where do you buy those at?
Wish there was a way to actually fix it. The TPE glue didn't really work. It would work initially, but as soon as any pressure was exerted on the area it would rip again. It was a losing battle. Would fix it immediately after use. After cleaning it of course.
This one only lasted a year. Didn't use it all that much. Feel like it's pretty much useless now. A bit frustrated with these things costing so much. Should be a way to get it fixed.
Is everyone having these issues?
Re: Tear in the "Clinical Perineum" aka between the vagina &
- The Romantic
- Doll Mentor
- Posts: 1818
- Joined: Mon Dec 08, 2014 10:37 am
- Location: West MI
- Contact:
Re: Tear in the "Clinical Perineum" aka between the vagina &
TPE glue is actually only good for superficial cuts in non-stress areas. And can usually do more harm than good anywhere stress is involved.
- siliconelover
- Doll Guru
- Posts: 5062
- Joined: Wed Feb 06, 2008 12:00 am
- Location: A Little South of Sanity ...
- Contact:
Re: Tear in the "Clinical Perineum" aka between the vagina &
Sorry to hear of your troubles. If your really into dolls, invest in a silicone one or be prepared to replace TPE on a regular time frame.
- The Romantic
- Doll Mentor
- Posts: 1818
- Joined: Mon Dec 08, 2014 10:37 am
- Location: West MI
- Contact:
Re: Tear in the "Clinical Perineum" aka between the vagina &
Sophie is kind enough to demonstrate the use of a non-standard insert (in this case a 17 Bordeaux by Toysheart) and some boyshort panties (tights or pantyhose could work too) to camouflage damage and make your girl more visually appealing.
If using a non-standard insert, be carful not to use one too big or even worse damage will occur. The 17 Bordeaux is perfect in girth, but a little short in length. So you can insert a chunk of an old insert or something first, then the new insert.
You can also save yourself a lot of trouble removing and reinserting the insert (and risking further damage) by using female condoms.
And again, thanks to Sophie for being such a "willing" model...
- Attachments
Re: Tear in the "Clinical Perineum" aka between the vagina &
I have many ideas, some work, some are still being played around with.mleecams81 wrote:So it finally split for good. After MANY repairs with TPE glue, which seemed to only help temporarily. A bit frustrated due to the cost of these things. I'm feeling like there's no permanent fix.
This is obviously a common problem with these I assume. So any ideas how to actually fix this problem?
It has officially torn between the area (since now it just has been progressively getting worse with no permanent solution from TPE glue.
I'd almost be willing to send it somewhere to get fixed, but the shipping costs are probably not worth it. I like the doll. Would be cool to get it fixed.
Any ideas?
Get some basic hot air tools. and a lower wattage solder iron 30/40 watt. Are you handy? got patience?. If this all that is wrong with your doll, then it may be worth to give it a go.
Some will call me a madman... YES!! IAM!! but I'm not scared of a little ole TPE rip, or even a big one. Only get good at something, by doing...
Solvents are impossible with BIG tears. they're meant for dinky rips.
Make your doll hot with heat...
Here is some mad man maniac videos, but things are slowly improving in the technique department... but most important, MAKE it FuN!!
Here is some of my YouTube videos experimenting with major repairs....
https://www.youtube.com/watch?v=oUR8amnDHQo
Doing this sort of thing is a lot of work, but not impoosible. It's about maintenace before major things happen.
-
- Apprentice
- Posts: 15
- Joined: Thu Sep 13, 2018 7:16 pm
- Contact:
Re: Tear in the "Clinical Perineum" aka between the vagina &
I just tried to use the TPE glue again for the hell of it. Yep disappointed again. lol
So now I'm thinking about the soldering iron idea. This poor thing might just get mutilated, but I'm trying to have a positive perspective.
I'd rather not go to the insert at the moment. Would like to fix her up again if at all possible.
- Chuck Norris
- Doll Mentor
- Posts: 1145
- Joined: Sat Mar 24, 2018 9:16 am
- Contact:
Re: Tear in the "Clinical Perineum" aka between the vagina &
Pics are worth a thousand words
-
- Apprentice
- Posts: 15
- Joined: Thu Sep 13, 2018 7:16 pm
- Contact:
Re: Tear in the "Clinical Perineum" aka between the vagina &
How many posts do I need to be able to post a pic?Chuck Norris wrote:Get another post on here and then, you will be able to post pictures of the actual damage.
Pics are worth a thousand words
I checked out the one poster's vid on using a soldering iron. Maybe that is the best bet. I will post a pic when I can.
Again I'm surprised this is not more of a problem.
Guess I've been wrecking this thing lol
-
- Apprentice
- Posts: 15
- Joined: Thu Sep 13, 2018 7:16 pm
- Contact:
Re: Tear in the "Clinical Perineum" aka between the vagina &
Pretty sure this TPE one is silicon.siliconelover wrote:I just want to interject and add that there is no such thing as TPE GLUE. It is a solvent.
Sorry to hear of your troubles. If your really into dolls, invest in a silicone one or be prepared to replace TPE on a regular time frame.
Where do we find replacement silicon? You can buy strips of this places?
I'm hoping I can just warm and fuse the two sides back together using some low heat and pressure (pushing the legs together)
I really don't know what the hell I'm doing yet LMAO. I just know the TPE glue works for about 5 minutes. Like the other poster stated, it doesn't work on high stress areas. So I need another solution.
-
- Apprentice
- Posts: 15
- Joined: Thu Sep 13, 2018 7:16 pm
- Contact:
Re: Tear in the "Clinical Perineum" aka between the vagina &
-
- Apprentice
- Posts: 15
- Joined: Thu Sep 13, 2018 7:16 pm
- Contact:
Re: Tear in the "Clinical Perineum" aka between the vagina &
What type of heat gun do you use?RGC_0767 wrote:I have many ideas, some work, some are still being played around with.mleecams81 wrote:So it finally split for good. After MANY repairs with TPE glue, which seemed to only help temporarily. A bit frustrated due to the cost of these things. I'm feeling like there's no permanent fix.
This is obviously a common problem with these I assume. So any ideas how to actually fix this problem?
It has officially torn between the area (since now it just has been progressively getting worse with no permanent solution from TPE glue.
I'd almost be willing to send it somewhere to get fixed, but the shipping costs are probably not worth it. I like the doll. Would be cool to get it fixed.
Any ideas?
Get some basic hot air tools. and a lower wattage solder iron 30/40 watt. Are you handy? got patience?. If this all that is wrong with your doll, then it may be worth to give it a go.
Some will call me a madman... YES!! IAM!! but I'm not scared of a little ole TPE rip, or even a big one. Only get good at something, by doing...
Solvents are impossible with BIG tears. they're meant for dinky rips.
Make your doll hot with heat...
Here is some mad man maniac videos, but things are slowly improving in the technique department... but most important, MAKE it FuN!!
Here is some of my YouTube videos experimenting with major repairs....
https://www.youtube.com/watch?v=oUR8amnDHQo
Doing this sort of thing is a lot of work, but not impoosible. It's about maintenace before major things happen.
And where do you get the temp gauge?
Just tried the soldering iron technique. (< was very cautious).. Worked for little bit but as soon as any stress was applied to the area it opened back up again.
Was thinking possibly using your technique it could seal in a more complete way.
This is a very challenging repair because it's on a stress area. I'm surprised more people haven't worked on this issue.
- siliconelover
- Doll Guru
- Posts: 5062
- Joined: Wed Feb 06, 2008 12:00 am
- Location: A Little South of Sanity ...
- Contact:
Re: Tear in the "Clinical Perineum" aka between the vagina &
The fact is, if you use and fuck your TPE doll on a regular basis, it is going to tear and split open. It can not be repaired, glued or otherwise. This is the nature of TPE and it has been around for decades. Once it starts, you are on borrowed time. Replacement will be necessary, these are disposable dolls.mleecams81 wrote: This is a very challenging repair because it's on a stress area. I'm surprised more people haven't worked on this issue.