Starpery.com

3d print files for download...Turbo Tampon orifice dryer!

Got an idea? Need an invention?
User avatar
Maxwedge
Senior Member
Senior Member
Posts: 422
Joined: Sun Nov 20, 2016 10:19 pm
Contact:

Re: 3d print files for download...Turbo Tampon orifice dryer

Post by Maxwedge »

Starquake wrote: So my new cleaning routine is to sit the doll on the potty, insert the TTSD V2.0, squirt in a few syringes of soapy water followed by a few syringes of plain water to rinse, take the tool out, wrap it in a wet wipe dipped in 3% peroxide which I wipe around the openings, then cover the tools with stockinette material bags, reinsert, switch on the air pump and leave it to dry.
After the soapy water rinse, and clean water rinse, could I do a 3% peroxide rinse and then just connect the air pump? Instead of taking the wand out to wrap in a peroxide soaked wipe? That way there would only be one insertion and less wear-n-tear. Other than wasting some peroxide is there any downside to this method?
Aiko 60
Aiko 63 (×2)
Aiko 82
Dollhouse168 80cm
CLM J55
CLM J58 BBW
CLM J60P
CLM 72cm BBW Maria
CLM 100cm D cup Una Kane (w/ Una Carha head)
WM 039 Head
WM 355 Elf Head
WM 432 Head w/ ROS option (disappointing)
WM 100cm D cup Carmelita
WM M cup Torso
Piperdoll 75cm Ariel Torso
Piperdoll 75cm Akira Torso
Piperdoll 80cm Phoebe Elf TPE
Piperdoll 100cm Iris
MRL Torso (small w/penetratable nipples)
MF Easy Move Eyes

User avatar
MannequinFan
Vendor Affiliated
Vendor Affiliated
Posts: 4713
Joined: Wed Jan 04, 2012 8:58 pm
Location: Central Illinois, U.S.
Contact:

Re: 3d print files for download...Turbo Tampon orifice dryer

Post by MannequinFan »

Hi Max,

I think the main reason SQ is using the cloth cover for drying is that the TPE tends to stick to the plastic when it dries, which could possibly cause damage when the unit is removed.
With that said, the cloth cover will still be a requirement for the drying.

I haven't had time to print a prototype for TT3, but as soon as I can do that and give it a test I'll post the
print files.

Starquake
Active Member
Active Member
Posts: 157
Joined: Fri Feb 24, 2017 7:07 am
Contact:

Re: 3d print files for download...Turbo Tampon orifice dryer

Post by Starquake »

I think leaving a wet wipe wrapped around the tool will cause issues when everything dries out
Fibres from the dried out wipes will stick to the tpe, causing issues when it comes to play time

User avatar
MannequinFan
Vendor Affiliated
Vendor Affiliated
Posts: 4713
Joined: Wed Jan 04, 2012 8:58 pm
Location: Central Illinois, U.S.
Contact:

Re: 3d print files for download...Turbo Tampon orifice dryer

Post by MannequinFan »

Alright, here is the third and final iteration TT/SD V3...
TTSD-V3.JPG
TTSD-V3.JPG (1.63 MiB) Viewed 2298 times
I haven't tested this with water, but I'm fairly confident it should work better than the previous version.
The larger internal tube and 1/4" water line will give more water volume for cleaning, and the dual air connection can directly tap both ports of the air pump for more air volume.
The quick connector plugs with the o-rings work nicely.

The parts...
TTSD-V3 wand parts.pdf
(2.41 MiB) Downloaded 145 times
TTSD-V3 other parts.pdf
(929.51 KiB) Downloaded 138 times
After download change the .pdf extension to .zip and extract.

Other materials needed...

1) One 7/32" brass tube 6" long.
https://www.hobbylobby.com/Crafts-Hobbi ... 32/p/21618

2) Two 5/32" brass or aluminum tubes 1.5" long.
https://www.hobbylobby.com/Crafts-Hobbi ... 32/p/24131
https://www.hobbylobby.com/Crafts-Hobbi ... 32/p/21778

3) Standard 1/4" hose barb coupling.
https://www.menards.com/main/plumbing/r ... 04&ipos=12

4) Two #8 o-rings.
https://www.homedepot.com/p/DANCO-8-O-R ... /100277697

5) Superglue and plastic epoxy for assembly.
https://www.homedepot.com/p/Loctite-0-8 ... /100371824
https://www.homedepot.com/p/Loctite-4g- ... /202020461

6) Acetone (nail polish remover) for polishing the wand.
Note: ABS printer plastic must be used for this to work.

Starquake
Active Member
Active Member
Posts: 157
Joined: Fri Feb 24, 2017 7:07 am
Contact:

Re: 3d print files for download...Turbo Tampon orifice dryer

Post by Starquake »

Wowweee

Good work MF :thumbs_up:

Every doll owner needs a couple of SD TTs imo
It's totally transformed my daily cleaning routine

User avatar
MannequinFan
Vendor Affiliated
Vendor Affiliated
Posts: 4713
Joined: Wed Jan 04, 2012 8:58 pm
Location: Central Illinois, U.S.
Contact:

Re: 3d print files for download...Turbo Tampon orifice dryer

Post by MannequinFan »

Thanks SQ! And thanks for all your help along the way. :)

Here's some dimensional info on the tubing I forgot to post for anyone wanting to make these.
Main tube (left) is 6" long x 7/32" diam.
Tubes for air connector (right) are 1-1/2" long x 5/32" diam.
Attachments
TTSD-V3 dimensions.jpg
TTSD-V3 dimensions.jpg (239.47 KiB) Viewed 2265 times

User avatar
Producer V
Apprentice
Apprentice
Posts: 11
Joined: Sun Dec 05, 2021 9:32 am
Location: Iowa
Contact:

Re: 3d print files for download...Turbo Tampon orifice dryer

Post by Producer V »

Hey everyone, I'm late to the party... but I LOVE what I'm reading!

I just downloaded the V3 files and have begun to print and assemble, and I've got a few ideas for some additional upgrades.

I'm wondering if anyone that's used this setup since these last posts could chime in?
- Do you have any helpful tips?
- What should I NOT do?

Thanks!

User avatar
MannequinFan
Vendor Affiliated
Vendor Affiliated
Posts: 4713
Joined: Wed Jan 04, 2012 8:58 pm
Location: Central Illinois, U.S.
Contact:

Re: 3d print files for download...Turbo Tampon orifice dryer

Post by MannequinFan »

Producer V wrote:Hey everyone, I'm late to the party... but I LOVE what I'm reading!

I just downloaded the V3 files and have begun to print and assemble, and I've got a few ideas for some additional upgrades.

I'm wondering if anyone that's used this setup since these last posts could chime in?
- Do you have any helpful tips?
- What should I NOT do?

Thanks!
Hi PV, and welcome to TDF!
I designed this tool entirely using Starquake's input so his comments on usage are probably still valid.

One note, I did make a slight revision on the wand after I got my bigger UpBOX+ printer.
Here is the full height version (6" tall). I put some fins at the bottom to stabilize during printing. You can just cut them off after printing. Change .pdf to .zip and extract...
wand-full height.pdf
(1003.17 KiB) Downloaded 36 times

User avatar
Producer V
Apprentice
Apprentice
Posts: 11
Joined: Sun Dec 05, 2021 9:32 am
Location: Iowa
Contact:

Re: 3d print files for download...Turbo Tampon orifice dryer

Post by Producer V »

Thanks MannequinFan, it's nice to be here!

I've been lurking for a year or so, after I bought my first doll... off Amazon. (That was a mistake) :oops:
MannequinFan wrote:Here is the full height version (6" tall)
Oh man, this is great! Looks like it will be so much easier with one piece.

So if you're the 3D designer behind this, thanks so so much!!!!, perhaps you could add some enhancements???

My bathroom is... far enough away to be a pain to take my girls to; so I'm looking for a solution that I could use anywhere.

---------------------------------------------------------------------------

What I really would like to see, is a combination of a "portable urinal" for a female and this design - this way there's a collection system built in. 8)

The Crotch Catcher

Here's a thing I found on Thingiverse, I thought it would be a good start.
Image

If I can give any sort of guidance on what I'm thinking:
  • - It would be nice to be able to attach this 'douche catcher' with the same quick-connect you've already designed for the wand
  • - I want to be able to use this WHILE using the water attachment
    • - Which means there needs to be a way to connect the water pump to the wand, while this is pressed up against her crotch
  • - In my mind I see two bottles attached
    • - One containing the cleaning solution
    • - One to collect what comes out
  • - The cleaning solution one has a collection tube leading from the bottom of the bottle up to the wand
If we can attach the air pump to the bottle with the cleaning solution, pumping air into it will force everything out. The loop runs:
- through the first bottle (up the collection tube)
- through the area to be cleaned
- and back down, collected by the "portable urinal" attachment, into the collection bottle
- with an air escape somewhere in the system at the end


If we pump air through the system, this will "kill two birds with one stone" - so to speak.
- First the water goes through... then the air to help force everything out and speed up drying.


Here's another thing that inspired the bottle collection.

Image

----------------------------------------------------------------------------------------

The dream is the following:
- I go to the bathroom and fill a 20oz bottle with soapy water
- I screw that, and an empty one, onto the bottom of the crotch catcher
- Then connect my air pump to the bottle with cleaner, and the wand to the crotch catcher
- Stand my girl up, straddling a towel
- Insert the wand into my girl, holding the whole thing between her legs pressed against her crotch
- Turn on the air pump... wait for the cleaner bottle to empty (giving her a little squish here and there - hehe)
- Wait for a time until I see no nothing else coming out into the collection bottle and don't hear water sounds any more
- Disconnect the crotch catcher from the wand
    • - Since this will be still inserted inside the doll, it would be nice if there was some way to make this easier without having to partially remove the wand
    • - Some lever or something
- Connect the air hose to the wand, leaving it there for awhile until she's dry
- Go clean everything in the bathroom
Image

----------------------------------------------------------------------------------------

If you could help make that dream a reality... you'll be my hero. :glou:

That's V1 of my ideas; V2 would include 2 wand adapters and something else for the bottles (2-liters on the floor with longer tubes or something...)
  • - This way you could do both vaginal and anus cleaning at once.
    • - But it would be nice to have this "hand-held" version first


Image

- As well as spaces inside the fins (on the wand) to include UVC LEDs (gotta kill those microbes!!!)


Thanks again!
--------------| MY FLEDGLING HAREM
At Home:
  • - 150cm ALIJIA knock off from Amazon (mistake)
  • - 100cm knock off from 3rd party site (another mistake)
    • - I know...

On The Way!!:
  • - 172cm SYDOLL (Head #616) [w/electric hips! 8)]

Still Waiting On:
  • - 150cm Ariel Piper-Doll
  • - 160cm RidMii Avy

User avatar
MannequinFan
Vendor Affiliated
Vendor Affiliated
Posts: 4713
Joined: Wed Jan 04, 2012 8:58 pm
Location: Central Illinois, U.S.
Contact:

Re: 3d print files for download...Turbo Tampon orifice dryer

Post by MannequinFan »

Hi PV,

As much as I would like to, unfortunately I just wouldn't have time to get into anything that complex.
I believe WM Doll tried their hand at something similar to what you're talking about. I'm not sure what the price is or if they are still selling it, but you can take a look at these threads for more info...

Manufacturer thread: viewtopic.php?f=215&t=131062
Review thread: viewtopic.php?f=215&t=131783

To me, perhaps a simpler solution would be to just get a cheap plastic bedpan to catch the drainage. That would at least eliminate needing to take the doll to the bathroom. Anyway, maybe a dumb idea but just a thought.
https://www.amazon.com/YUMSUM-Stable-Co ... B074G3P9BB


User avatar
Producer V
Apprentice
Apprentice
Posts: 11
Joined: Sun Dec 05, 2021 9:32 am
Location: Iowa
Contact:

Re: 3d print files for download...Turbo Tampon orifice dryer

Post by Producer V »

MannequinFan wrote:Hi PV,
To me, perhaps a simpler solution would be to just get a cheap plastic bedpan to catch the drainage. That would at least eliminate needing to take the doll to the bathroom. Anyway, maybe a dumb idea but just a thought.
My current thought as well.

I can completely understand not having any time. ;)

I've only dabbled in 3D stuff, but I'm gonna give this a go and see if I can't figure out how to combine these STL files together in some way to make a prototype.
Funny... I don't have any time for more 'work' stuff, but I have plenty of time for this! Hahaha

Thanks again for all the leg work you've done already! You've got me 70% the way there! :glou:
--------------| MY FLEDGLING HAREM
At Home:
  • - 150cm ALIJIA knock off from Amazon (mistake)
  • - 100cm knock off from 3rd party site (another mistake)
    • - I know...

On The Way!!:
  • - 172cm SYDOLL (Head #616) [w/electric hips! 8)]

Still Waiting On:
  • - 150cm Ariel Piper-Doll
  • - 160cm RidMii Avy

User avatar
Producer V
Apprentice
Apprentice
Posts: 11
Joined: Sun Dec 05, 2021 9:32 am
Location: Iowa
Contact:

Re: 3d print files for download...Turbo Tampon orifice dryer

Post by Producer V »

MannequinFan wrote: I believe WM Doll tried their hand at something similar to what you're talking about. I'm not sure what the price is or if they are still selling it
  • - They are... for $400 USD!
:thumbs_down:

Thankfully... the VAST majority of all the work has already been done. Models have been made, tested, refined, and all we need to do is combined them together.

With that... I give you:
THE CROTCH CATCHER 0500
Image

Threw something together using some free online 3D software I found, basically putting all the pieces together.

This is the idea, now to just smooth things out and make this a real printable model.

If anyone here knows what they're doing with modeling software (I'm a complete newb), and you've got some spare time on your hands, PM me and let's work together! (^_^)
  • - I got all the parts there, just need to make sure a few things are corrected because of my ignorance.
    • - I literally just imported all the models I needed, started arranging, made some mistakes, but got something that 'looks' close to my idea.
There's really only 3 models
  • Portable urinal
    Quick-Connect (from the models provided here)
    Bottle Adapter
Here's my ToDo list of modifications that need to be made:
For the urinal model
  • - This basically needs some warping done to it.
    • - It would be nice for the "drain spout" to bend so that the bottle attached at the bottom is hanging straight down
    • - This way you can hold onto the spout like a handle, and not be fighting gravity because the bottle is at some strangle angle
For the bottle cap adapter
  • - The quick connect needs to be attached to the top
  • - A hole needs to be made in the cap for the quick-connect (using the vertical hole that's longer as a point of alignment; this is the place you put in some tubing to reach the bottom of the bottle - the collection tube)
    • - cleaning solution will go up the tube, through the quick connect, and into the wand
  • - For the hole we're moving, the original threaded hole needs to be removed/sealed
Other than that, the only thing left is to combine the two elements... and we've got a prototype! :glou:
  • - In fact, I think if you printed this file (and drilled the hole through the quick-connect into the collection spout), this might actually work as it is...
--------------------------------------------------------------------------------------------------------------------------------------------------------------

I think I'm gonna start a new thread about this (unless others think this is a good place for all this).
Attachments
01 - Bottle Adapters.png
01 - Bottle Adapters.png (128.33 KiB) Viewed 688 times
02 - Cleaning solution bottle (hole diagram).png
02 - Cleaning solution bottle (hole diagram).png (212.47 KiB) Viewed 688 times
03 - Cleaning solution path demo.png
03 - Cleaning solution path demo.png (227.53 KiB) Viewed 688 times
04 - Hole required.png
04 - Hole required.png (270.13 KiB) Viewed 688 times
Crotch Catcher 1000 (STL).pdf
(change to .STL)
(7.08 MiB) Downloaded 19 times
--------------| MY FLEDGLING HAREM
At Home:
  • - 150cm ALIJIA knock off from Amazon (mistake)
  • - 100cm knock off from 3rd party site (another mistake)
    • - I know...

On The Way!!:
  • - 172cm SYDOLL (Head #616) [w/electric hips! 8)]

Still Waiting On:
  • - 150cm Ariel Piper-Doll
  • - 160cm RidMii Avy

User avatar
stevenm2000
Active Member
Active Member
Posts: 117
Joined: Thu Oct 21, 2021 6:21 pm
Contact:

Re: 3d print files for download...Turbo Tampon orifice dryer

Post by stevenm2000 »

This is what I've been testing out for the past 2 months. The idea was to have something I could bring to her on the bed or where ever she was and not have any leaks. Just use a 1/2 hose connected to a 550gph pump and (2) 5 gallon buckets. First soapy water then rinse water. 1 for fluid in and 1 for fluid out. The holes in the wand help regulate any water pressure so there is no damage. The concept works pretty well. No leaks and can clean where ever.

I dont have a doll over 27kg so decided to forgo all the stuff and simply connect a hose to the shower head. The output goes directly into the drain. Again, no mess to deal with. Just stand her in the shower, insert and turn on water to a pre-marked spot. Come back after 15 minutes and then use the aquarium pump to dry her out. Before I bring her to the shower i put bacterial soap on a non bleach, non alcohol wipe and use that to get her soapy inside.

I made another wand just for cleaning which works pretty good.

Appears to be working so far.
Attachments
20211206_192028.jpg
20211206_192028.jpg (111.66 KiB) Viewed 687 times
20211206_191342.jpg
20211206_191342.jpg (99.59 KiB) Viewed 687 times
20211206_191314.jpg
20211206_191314.jpg (109.64 KiB) Viewed 687 times
20211206_191210.jpg
20211206_191210.jpg (115.86 KiB) Viewed 687 times
Elsababe 148cm small breasts with Inoue Miu head
Tayu 148cm
SE 151cm

User avatar
stevenm2000
Active Member
Active Member
Posts: 117
Joined: Thu Oct 21, 2021 6:21 pm
Contact:

Re: 3d print files for download...Turbo Tampon orifice dryer

Post by stevenm2000 »

@ MannequinFan - I did download your V3 deluxe head stand files from your site recently. They work pretty well.
Elsababe 148cm small breasts with Inoue Miu head
Tayu 148cm
SE 151cm

User avatar
stevenm2000
Active Member
Active Member
Posts: 117
Joined: Thu Oct 21, 2021 6:21 pm
Contact:

Re: 3d print files for download...Turbo Tampon orifice dryer

Post by stevenm2000 »

Sorry, forgot to add one with it in use.
Attachments
20211206_194941.jpg
20211206_194941.jpg (101.21 KiB) Viewed 683 times
Elsababe 148cm small breasts with Inoue Miu head
Tayu 148cm
SE 151cm

Post Reply

INFORMATIONS