Ordered my first doll: WM 158 D-cup
- Dr Dollinger
- Doll Mentor
- Posts: 1221
- Joined: Tue Dec 27, 2016 8:25 pm
- Location: From behind the curtain
- Contact:
Re: Ordered my first doll: WM 158 D-cup
Wow, really nice and unique style. She looks very real on these poses
You mean the eyelashes to remove? Or the brows?
Fingernails & eyelashes are easy to remove by pulling them off carefully. You can use additional some baby oil
- avante
- Doll Mentor
- Posts: 1700
- Joined: Tue Mar 28, 2017 11:23 am
- Location: Holland - the Netherlands
- Contact:
Re: Ordered my first doll: WM 158 D-cup
My doll experience : WM 158D tales & pics: viewtopic.php?f=215&t=85063&start=465
- avante
- Doll Mentor
- Posts: 1700
- Joined: Tue Mar 28, 2017 11:23 am
- Location: Holland - the Netherlands
- Contact:
Re: Ordered my first doll: WM 158 D-cup
Eyebrows are still with powder for example, and also just as the make up from my one of my first attempts ;p
Did replace her lower eyelids tho, and had to take a quick pic of here lovely face.
My doll experience : WM 158D tales & pics: viewtopic.php?f=215&t=85063&start=465
- avante
- Doll Mentor
- Posts: 1700
- Joined: Tue Mar 28, 2017 11:23 am
- Location: Holland - the Netherlands
- Contact:
Re: Ordered my first doll: WM 158 D-cup
The yellow thing-holder thingy really is not necessary (or big help, its helps a bit tho) but I bought it because I thought it might serve as a finger protector (during movement) and/or to re-twirl her fingers back into position a bit (some a a bit messed because of wire displacement and me not handling it more swiftly)...we'll see how it goes ;p
Here's her first golden nails:
My doll experience : WM 158D tales & pics: viewtopic.php?f=215&t=85063&start=465
-
- Apprentice
- Posts: 10
- Joined: Wed Nov 22, 2017 10:14 am
- Contact:
Re: Ordered my first doll: WM 158 D-cup
Looking at the images you posted, the 158-D sure has an excellent figure, it's all very balanced. I'm sure I made the right choice now.
- avante
- Doll Mentor
- Posts: 1700
- Joined: Tue Mar 28, 2017 11:23 am
- Location: Holland - the Netherlands
- Contact:
Re: Ordered my first doll: WM 158 D-cup
ShadowGeist wrote:The WM 158-D is my first doll as well, due to be delivered soon. I'm nervous, because I've never owned a doll before.
Looking at the images you posted, the 158-D sure has an excellent figure, it's all very balanced. I'm sure I made the right choice now.
Hey man,
Good to hear! Yes, I really like how her body is balanced. Found some info on average Asian woman sizes of girls in their 20s. The WM 158D model is spot on on both height, waist, hips and thighs. Only department where she is less is the feet size (seems like all dolls have tiny feet unfortunately). And only department where she is larger is the breast...but that is not really a negative
Gotta say, till this day, I am still very happy I went with this model for first. Sure you will be too! The body is very soft and realistic. Her look is amazing, pretty near perfect proportions (tho I would love to have a doll, basically the same figure but with slightly larger hips and thigs).
The only thing I have 'against' the model / skeleton is the lousy hand quality: the design is very flawed. I probably could have protected them better, but still: the hand / finger design is utter shit. I'd advise you to really look out for the hands, probably not 'use' them as much as you'd like. It seems most WM158D owners run into wires snapping and finger pokes rather sooner then later.
One other tip I can give you heads on is: put something soft under her elbows and knees if you are doing doggy om some variant where she's touching hard stuff with those parts: there it seems most dolls are pretty obviously flawed in design, because the metal joints are not 'shielded off'. Hence the metal will rip the TPE apart, if not careful. Just some words to the wise, hope you'll enjoy your girl! Please let me now if you get her, and start a thread / have some pics!
My doll experience : WM 158D tales & pics: viewtopic.php?f=215&t=85063&start=465
- avante
- Doll Mentor
- Posts: 1700
- Joined: Tue Mar 28, 2017 11:23 am
- Location: Holland - the Netherlands
- Contact:
Re: Ordered my first doll: WM 158 D-cup
My doll experience : WM 158D tales & pics: viewtopic.php?f=215&t=85063&start=465
-
- Apprentice
- Posts: 10
- Joined: Wed Nov 22, 2017 10:14 am
- Contact:
Re: Ordered my first doll: WM 158 D-cup
Yeah, I've noticed that these kinds of dolls have really small feet... what shoe size is the WM158-D if I may ask? I'm not in the USA, but I can use a shoe size conversion chart. Her foot length is reported to be 21.5cm so that gives me a clue.avante wrote:Only department where she is less is the feet size (seems like all dolls have tiny feet unfortunately).
Yeah, I've read a lot about the hand and wires being really poor. May I ask, what can you "do wrong" with the hands that leads to wires snapping and poking?The only thing I have 'against' the model / skeleton is the lousy hand quality: the design is very flawed. I probably could have protected them better, but still: the hand / finger design is utter shit. I'd advise you to really look out for the hands, probably not 'use' them as much as you'd like. It seems most WM158D owners run into wires snapping and finger pokes rather sooner then later.
Thanks, this is very helpful indeed. Also, based on what I read, for the doggy style it is NOT recommended to use her hands to stand her upper half up for the position right?One other tip I can give you heads on is: put something soft under her elbows and knees if you are doing doggy om some variant where she's touching hard stuff with those parts: there it seems most dolls are pretty obviously flawed in design, because the metal joints are not 'shielded off'. Hence the metal will rip the TPE apart, if not careful. Just some words to the wise.
For the doggy style I'll probably be placing the doll on the bed for it. Would I still need to put something soft under her elbows and knees?
Oh and nice images by the way, females in tight jeans and high heels are always good.
- avante
- Doll Mentor
- Posts: 1700
- Joined: Tue Mar 28, 2017 11:23 am
- Location: Holland - the Netherlands
- Contact:
Re: Ordered my first doll: WM 158 D-cup
1) a curly wig is not your best choice to start with. A straight wig is way better (duh btw).
2) a straight wig that is about 100cm long is also not very wise to start with either...
Well that's it that is when I gave up...for now
I did however though put her in MY chair. LOL and at some point, you really want to sit again...
It's however quite hard (figure of speech) to pull such a hot looking lady off there, I mean...after all,
at some point you have to be blunt and tell her "kindly sit your ass on the desk; that is MY chair"
PART II
My doll experience : WM 158D tales & pics: viewtopic.php?f=215&t=85063&start=465
- avante
- Doll Mentor
- Posts: 1700
- Joined: Tue Mar 28, 2017 11:23 am
- Location: Holland - the Netherlands
- Contact:
Re: Ordered my first doll: WM 158 D-cup
Good to see such extensive reply; shows me you are thinking seriously over this new hobby of yours
I've gotten one pair of 33's which are like perfect. And 3 pairs of 34: fits well, but the feet can shoot ou more easily. And finally one pair of 35's: they are decent because they are boots / high ankle, but it's better to use (my) socks with that pair because of the excess feet room so to say.ShadowGeist wrote:Yeah, I've noticed that these kinds of dolls have really small feet... what shoe size is the WM158-D if I may ask? I'm not in the USA, but I can use a shoe size conversion chart. Her foot length is reported to be 21.5cm so that gives me a clue.avante wrote:Only department where she is less is the feet size (seems like all dolls have tiny feet unfortunately).
Well first off: I'm not going to give you false hope; at least in my opinion the fingers will pretty much break 'pre-determined' and almost randomly. You'll probably experience a few your self, even if be careful. One time I had her against the wall with hand flat on it, and I could just feel the finger going wrong..and few minutes later I had 2 more wires loose...in a 'no-tension' (I would assume: wires straight) position. So yeah, there is thatShadowGeist wrote:Yeah, I've read a lot about the hand and wires being really poor. May I ask, what can you "do wrong" with the hands that leads to wires snapping and poking?The only thing I have 'against' the model / skeleton is the lousy hand quality: the design is very flawed. I probably could have protected them better, but still: the hand / finger design is utter shit. I'd advise you to really look out for the hands, probably not 'use' them as much as you'd like. It seems most WM158D owners run into wires snapping and finger pokes rather sooner then later.
But more helpful: I'd say especially during moving her I have had her hands / fingers knocking to doorpost and such. Or while siting, putting her arms / hands in position by sort off moving 'harshly' over hard object. Also, maybe, it did not help she preformed some crazy HJ's
JunkGuy told me usefull tip on bending the wires: to hold the 'to bend' wire at the first knockle (I believe, as I remember). Probably / maybe / additionaly holding the hand-plate (that is were the wires go into (you;ll feel) while twisting the fingers. And one thing I've learned: it's best to remove the wire, if it breaks, rather sooner than later. It will do damage, my dolls hand is full of wire poke marks .
Glad to help! Really as first time owner you'll go from gently to harder...at some point you'll probably go kind off ballistic on her and forget all about her tendernessShadowGeist wrote:Thanks, this is very helpful indeed. Also, based on what I read, for the doggy style it is NOT recommended to use her hands to stand her upper half up for the position right?One other tip I can give you heads on is: put something soft under her elbows and knees if you are doing doggy om some variant where she's touching hard stuff with those parts: there it seems most dolls are pretty obviously flawed in design, because the metal joints are not 'shielded off'. Hence the metal will rip the TPE apart, if not careful. Just some words to the wise.
For the doggy style I'll probably be placing the doll on the bed for it. Would I still need to put something soft under her elbows and knees?
When I do doggy on the bed, I place nothing under her; no problems what so ever. Doggy takes some adjustment, but it's one of my fav's with her for sure.
But for example, when I do her on the table, I (since I did not once) always put some cushion / thick blanket / soft material undr her (rotating) joints.
I do not fully understnad what you mean by (for doggy) "use her hands to stand her upper half up for the position"
Can you explain how I should see that position (having hard time visualizing it) or do you maybe have a pic of it?
Thanks man, yeah I kinda have a thing going for that as well If you liked those you'll love the above pics.ShadowGeist wrote: Oh and nice images by the way, females in tight jeans and high heels are always good.
Some times, she just looks so damn real, some times I just go damn...wtf she is so goddamn hot!
Hope you'll have similar experiences, for example, right now, every time I stop typing and look to the left she's like...
Looking at me with those brown eyes driving me crazy she has like this nympho vibe going
My doll experience : WM 158D tales & pics: viewtopic.php?f=215&t=85063&start=465
-
- Apprentice
- Posts: 10
- Joined: Wed Nov 22, 2017 10:14 am
- Contact:
Re: Ordered my first doll: WM 158 D-cup
Again, much appreciated for the advice.avante wrote:Well first off: I'm not going to give you false hope; at least in my opinion the fingers will pretty much break 'pre-determined' and almost randomly. You'll probably experience a few your self, even if be careful. One time I had her against the wall with hand flat on it, and I could just feel the finger going wrong..and few minutes later I had 2 more wires loose...in a 'no-tension' (I would assume: wires straight) position. So yeah, there is that
But more helpful: I'd say especially during moving her I have had her hands / fingers knocking to doorpost and such. Or while siting, putting her arms / hands in position by sort off moving 'harshly' over hard object. Also, maybe, it did not help she preformed some crazy HJ's
JunkGuy told me usefull tip on bending the wires: to hold the 'to bend' wire at the first knockle (I believe, as I remember). Probably / maybe / additionaly holding the hand-plate (that is were the wires go into (you;ll feel) while twisting the fingers. And one thing I've learned: it's best to remove the wire, if it breaks, rather sooner than later. It will do damage, my dolls hand is full of wire poke marks .
May I ask how you removed the broken wires from her hand? Did you have to cut the TPE?
Okay sorry I was bit unclear on the wording. Let me put it this way: some women in doggystyle rest on their elbows; and some women in doggystyle rest on their palms/hands.I do not fully understnad what you mean by (for doggy) "use her hands to stand her upper half up for the position" Can you explain how I should see that position (having hard time visualizing it) or do you maybe have a pic of it?
I gather that it is a bad idea to have the doll resting on her palms/hands in doggystyle?
Excellent stuff, this kind of talk makes me even more nervous for when my doll arrives.ShadowGeist wrote: Thanks man, yeah I kinda have a thing going for that as well If you liked those you'll love the above pics. Some times, she just looks so damn real, some times I just go damn...wtf she is so goddamn hot!
Hope you'll have similar experiences, for example, right now, every time I stop typing and look to the left she's like... Looking at me with those brown eyes driving me crazy she has like this nympho vibe going
- avante
- Doll Mentor
- Posts: 1700
- Joined: Tue Mar 28, 2017 11:23 am
- Location: Holland - the Netherlands
- Contact:
Re: Ordered my first doll: WM 158 D-cup
ShadowGeist wrote:Again, much appreciated for the advice.avante wrote:Well first off: I'm not going to give you false hope; at least in my opinion the fingers will pretty much break 'pre-determined' and almost randomly. You'll probably experience a few your self, even if be careful. One time I had her against the wall with hand flat on it, and I could just feel the finger going wrong..and few minutes later I had 2 more wires loose...in a 'no-tension' (I would assume: wires straight) position. So yeah, there is that
But more helpful: I'd say especially during moving her I have had her hands / fingers knocking to doorpost and such. Or while siting, putting her arms / hands in position by sort off moving 'harshly' over hard object. Also, maybe, it did not help she preformed some crazy HJ's
JunkGuy told me usefull tip on bending the wires: to hold the 'to bend' wire at the first knockle (I believe, as I remember). Probably / maybe / additionaly holding the hand-plate (that is were the wires go into (you;ll feel) while twisting the fingers. And one thing I've learned: it's best to remove the wire, if it breaks, rather sooner than later. It will do damage, my dolls hand is full of wire poke marks .
May I ask how you removed the broken wires from her hand? Did you have to cut the TPE?
Okay sorry I was bit unclear on the wording. Let me put it this way: some women in doggystyle rest on their elbows; and some women in doggystyle rest on their palms/hands.
I gather that it is a bad idea to have the doll resting on her palms/hands in doggystyle?
Excellent stuff, this kind of talk makes me even more nervous for when my doll arrives.
To remove the wires I cut her hand at the inside-palm at the top end of the hand plate. You can than pull the wires out (with some tool holding it). I'd use a stanley knife, but next time prob. sharp scissors.
On the doggy it's now pretty clear haha well yes, I'd say that is correct. Done it few times, her on her hands, but on her arms is way better / safer.
Hahaha I feel your anticipation it'll be awesome!
My doll experience : WM 158D tales & pics: viewtopic.php?f=215&t=85063&start=465
Re: Ordered my first doll: WM 158 D-cup
Can we have the same photo with her face looking to the camera?
Please
Bodies: WM 166C tan, WM 163C tan
Heads: YL Allura 193, YL 315, WM 336
Looking for great asian kisser face.
- avante
- Doll Mentor
- Posts: 1700
- Joined: Tue Mar 28, 2017 11:23 am
- Location: Holland - the Netherlands
- Contact:
Re: Ordered my first doll: WM 158 D-cup
Thanks for the compliment man and also good to see some people are checking pages from some time ago!
I'll try to make similar pics soon. For the mean time, just found this sitting on my desktop. Always like that from behind view myself:
My doll experience : WM 158D tales & pics: viewtopic.php?f=215&t=85063&start=465
- avante
- Doll Mentor
- Posts: 1700
- Joined: Tue Mar 28, 2017 11:23 am
- Location: Holland - the Netherlands
- Contact:
Re: Ordered my first doll: WM 158 D-cup
The eyeshadow went pretty well , eyebrows well at least better than the powder , and the lip stick...well quite less:
It seems the (previous layer) liptsick (well lipgloss) has sort of 'stained' or colored the skin. Anything I can do the remove it? (because it is a bit outside the lines).
My doll experience : WM 158D tales & pics: viewtopic.php?f=215&t=85063&start=465