Turd Flinging Monkey's guide to hand repair
- Panther68
- Doll Guru
- Posts: 5016
- Joined: Sat Aug 26, 2017 12:19 am
- Location: Peoples Republic of Kalifornia
- Contact:
Turd Flinging Monkey's guide to hand repair
Letting everybody know that TFM, Turding Flinging Monkey posted a video of doll hand repair on his MGTOW channel. It was perfect timing since my Anastasia has now broken all her fingers after just 6 weeks. Its more informative than anything that I have found to this point. Time to do some doll surgey.
https://www.youtube.com/watch?v=yBzac02O7-o&t=494s
Re: Turd Flinging Monkey's guide to hand repair
I wonder what make/model of doll Celestina is? Does anyone know?
Thanks for posting this Panther68 and to TFM for the helpful video!
-
- Apprentice
- Posts: 13
- Joined: Wed Jul 05, 2017 9:33 pm
Re: Turd Flinging Monkey's guide to hand repair
I just keep the link in case of some tears, will try to repair by myself.
- Panther68
- Doll Guru
- Posts: 5016
- Joined: Sat Aug 26, 2017 12:19 am
- Location: Peoples Republic of Kalifornia
- Contact:
Re: Turd Flinging Monkey's guide to hand repair
Logan569 wrote:Well this is surreal. I'm on YouTube watching MGTOW and Celestina videos on TFM's channel and at the same time, I see your post here on TDF. Very timely as Rachael has a couple of loose fingers. I watched the video. TDF's tips, products used and learning from his experience are going to be very helpful to keep Rachael in tip top shape.
I wonder what make/model of doll Celestina is? Does anyone know?
Thanks for posting this Panther68 and to TFM for the helpful video!
She is a WM 165.
As for myself, I will order the necessary parts on Amazon. Anastasia using her hands is a big part of my photo shoots, so this is a big help.
- Mr_Fix_it
- Doll Elder
- Posts: 3039
- Joined: Sun Jan 29, 2017 4:36 am
- Location: Over the Horizon turn left and about half way up the hill
- Contact:
Re: Turd Flinging Monkey's guide to hand repair
That video is quite informative, I just have one issue with the choice of mask shown. The cartridges on that mask in the video will NOT protect you very well from melting TPE fumes. Please see: https://www.dollforum.com/forum/viewtop ... =7&t=92732
Please, extra care is vital here!
Fix.
- grimreefer24601
- Member
- Posts: 1378
- Joined: Sun Sep 10, 2017 3:23 pm
- Location: With MJ in Dopetopia
- Contact:
Re: Turd Flinging Monkey's guide to hand repair
The new hand-plate method is a much better solution. It allows easy replacement of an future broken wires.
New WM doll are a little different than CC is showing. They are more like TFM is showing, but I can guarantee CC's method will work for new WM140s. I'll be posting a full thread about it when I finish MJ's second hand. I have one hand plate replaced, and I will be closing the hand this weekend when I have some time at my house alone.
Re: Turd Flinging Monkey's guide to hand repair
Those videos are excellent! I watched both. Where did CC buy the new handplates?
I'll keep an eye out for your upcoming thread.
I've learned so much from TDF and the members here!
Re: Turd Flinging Monkey's guide to hand repair
- grimreefer24601
- Member
- Posts: 1378
- Joined: Sun Sep 10, 2017 3:23 pm
- Location: With MJ in Dopetopia
- Contact:
Re: Turd Flinging Monkey's guide to hand repair
CrazyCajun doesn't buy them, he makes them. He made MJ's new plates also.Logan569 wrote:grimreefer24601,
Those videos are excellent! I watched both. Where did CC buy the new handplates?
I'll keep an eye out for your upcoming thread.
I've learned so much from TDF and the members here!
- Panther68
- Doll Guru
- Posts: 5016
- Joined: Sat Aug 26, 2017 12:19 am
- Location: Peoples Republic of Kalifornia
- Contact:
Re: Turd Flinging Monkey's guide to hand repair
This is great. Would rather get the upgraded hand plate. I was searching high and low for information on hand repair and for some reason I didn't come across these videos.grimreefer24601 wrote:CrazyCajun doesn't buy them, he makes them. He made MJ's new plates also.Logan569 wrote:grimreefer24601,
Those videos are excellent! I watched both. Where did CC buy the new handplates?
I'll keep an eye out for your upcoming thread.
I've learned so much from TDF and the members here!
- grimreefer24601
- Member
- Posts: 1378
- Joined: Sun Sep 10, 2017 3:23 pm
- Location: With MJ in Dopetopia
- Contact:
Re: Turd Flinging Monkey's guide to hand repair
I am in process of completing my first hand plate. It's not the same on my Sept 2017 WM doll as the April Atleur video. I'll post a full thread hopefully in a few weeks time. I've modified the hand plates fit my doll. I need to close her substantial wound (mostly caused by her damaged hand). Then I'll fix her second hand with a little more experience.
This is not something that is plug and play. This requires tools, and skill to install. Even if CC made you plates you will most likely have to customize them to fit. In my case this required a dremmel for cutting metal, both on the plate and the dolls wrist. Once to cut off the spot welded bolt (yes my doll they welded the bolt not the nut), and then to remove some edges to make her hand move smoothly.
CC did as well as he could, but the plate had to be modified to fit correctly.
I'm not trying to discourage anyone. I have been able to make it work. CrazyCajun has made it work. CinnamonLover made it work. It's not an easy mod to make, but it's a very worthwhile mod to make.
At this point, I can add myself, I think, as someone with experience on these procedures. If I can answer any questions let me know. If I don't know the answer, I can contact someone who does I'm pretty sure.
Re: Turd Flinging Monkey's guide to hand repair
Yep Turd Flinging Monkey was well.... ummmm flinging turd. Poorly thought out fix TFM!! CC was THE man to give me the encouragement to get in there and fix it already!!grimreefer24601 wrote:CrazyCajun has done a much better job with replacing the hand plates. Please note that CC was working with CinnimonLover who pioneered this technique.
The new hand-plate method is a much better solution. It allows easy replacement of an future broken wires.
New WM doll are a little different than CC is showing. They are more like TFM is showing, but I can guarantee CC's method will work for new WM140s. I'll be posting a full thread about it when I finish MJ's second hand. I have one hand plate replaced, and I will be closing the hand this weekend when I have some time at my house alone.
I'm nowhere near as smart as James, but I do what I can, and usually do ok!!!
We will all miss him and the Miss Atleur team!!
Rest In Peace CrazyCajun!!
- Panther68
- Doll Guru
- Posts: 5016
- Joined: Sat Aug 26, 2017 12:19 am
- Location: Peoples Republic of Kalifornia
- Contact:
Re: Turd Flinging Monkey's guide to hand repair
I do have CC's hand plates, so eventually I will install them. Been following your posts on BodyColor. Kudos to you, for trying to continue it. When you get your formula right, do you plan to sell it?
Re: Turd Flinging Monkey's guide to hand repair
TFM did have some decent ideas. I do not knock him entirely. Tops of hands are like a car hood. gotta be nice and clean. It's all part of the showPanther68 wrote:Yeah, I believe that TFM has already stated that the wires have since broken again. His Celestina and my Anastasia compensate with wearing gloves. I really don't mind the floppy hand. I just don't like the twisted fingers that I have to try and hide in my photography.
I do have CC's hand plates, so eventually I will install them. Been following your posts on BodyColor. Kudos to you, for trying to continue it. When you get your formula right, do you plan to sell it?
I did order armature wire. Yes, it can get brittle and break. It is aluminum after all. I've even bought plastic coated garden wire at the dollar store. It's fairly durable. and would probably work as well.
I have no idea about body color. It's not me. I think I know who you mean though. So many mentors here isn't there?
- Panther68
- Doll Guru
- Posts: 5016
- Joined: Sat Aug 26, 2017 12:19 am
- Location: Peoples Republic of Kalifornia
- Contact: