realsexdoll.com

My dear Diaoshi

Palace of the plastic princess. Usually ranging from $15 to $300
Citlinho_75
Active Poster
Active Poster
Posts: 54
Joined: Fri Sep 15, 2017 5:28 am
Contact:

My dear Diaoshi

Post by Citlinho_75 »

After 30 days for purchase I received my Diaoshi doll in perfect conditions. The package included an extra wig I ordered, repair kit, heating pole, vibrating cell with very loud voice! There came a very bad filling pump. But that was no problem because I had a better pump from my previous doll. It was purchased on the Aliexpress by only 74 USD including shipping.

There is already a topic with this beauty. But I would like to show here the customization that I will do in mine. :D
Attachments
doll_02.jpg
doll_02.jpg (50.54 KiB) Viewed 6063 times

User avatar
yorktown
Doll Elder
Doll Elder
Posts: 3338
Joined: Sun Oct 18, 2009 12:00 am
Location: Biergarten
Contact:

Re: My dear Diaoshi

Post by yorktown »

8) Hola

Great picture - Citlinho_75 - :thumbs_up:

Those Daio Shi air babe sure are nice looking and fun to squeeze too - :angel:

Keep those pics coming - :thumbs_up:

User avatar
puma uma
Doll Elder
Doll Elder
Posts: 2096
Joined: Sat Oct 19, 2013 4:06 pm
Location: ex member/I quit.
Contact:

Re: My dear Diaoshi

Post by puma uma »

Those were the days starting out with a Daio Shi doll. Congrats man! Absolutely nothing wrong with inflatables. They are often forgotten on here compared to other dolls. I miss my inflatables they treated me very well in bed. :glou: :glou:
It's all about da booty. The booty is life!

http://www.dollalbum.com/dollgallery/in ... ?cat=14528
my doll album

JETO
Apprentice
Apprentice
Posts: 17
Joined: Fri Oct 27, 2017 3:46 am
Contact:

Re: My dear Diaoshi

Post by JETO »

She looks beautiful. i never had an inflatable type of doll. worth to have a try. :)

User avatar
TheScAtMaN
Active Member
Active Member
Posts: 154
Joined: Sun Mar 22, 2009 12:00 am
Location: UK
Contact:

Re: My dear Diaoshi

Post by TheScAtMaN »

Nice!
How is the mouth, useable or is this one area you are thinking of modifying?

Citlinho_75
Active Poster
Active Poster
Posts: 54
Joined: Fri Sep 15, 2017 5:28 am
Contact:

Re: My dear Diaoshi

Post by Citlinho_75 »

TheScAtMaN wrote:Nice!
How is the mouth, useable or is this one area you are thinking of modifying?
I chose that model with the small opening in the mouth not for oral. But to give the impression that she's talking to me. She has two good holes underneath. The seller says she's capable of oral. But I will not use it for that purpose. For when you touch her face in her mouth you have the sensation of a kiss. And I don't want to miss it! :razz:

User avatar
Obin
Doll Oracle
Doll Oracle
Posts: 8104
Joined: Wed Jun 27, 2007 12:00 am
Location: near Atlanta, GA.
Contact:

Re: My dear Diaoshi

Post by Obin »

:D :thumbs_up: :thumbs_up:
笑. It's good for you.

Presidential Commission on Obscenity and Pornography

Does she...or doesn't she? (A slogan used by Clairol)

My dolls

Reminder to self: Still more work to do on my albums.

First photo shoot of Sandra, a Sanhui 145 cm lady doll.
[thumb]http://dollforum.com/forum/download/file.php?id=196256&t=1[/thumb]


Fun photos of my JM 110cm, Angie.
http://dollforum.com/forum/viewtopic.php?f=196&t=74121


Citlinho_75
Active Poster
Active Poster
Posts: 54
Joined: Fri Sep 15, 2017 5:28 am
Contact:

Re: My dear Diaoshi

Post by Citlinho_75 »

In time, can anyone tell me or point out some topic about cleaning and caring for our vinyl dolls with silicone parts?
Attachments
doll_03.jpg
doll_03.jpg (116.09 KiB) Viewed 5877 times

User avatar
yorktown
Doll Elder
Doll Elder
Posts: 3338
Joined: Sun Oct 18, 2009 12:00 am
Location: Biergarten
Contact:

Re: My dear Diaoshi

Post by yorktown »

8) Hola

Great question - Citlinho_75 - :thumbs_up:

The TPE inserts of the Daio Shi air babe should be cleaned out after each flight - or that is what I do -

Here is how I do it to her

With the air babe fully deflated - make sure air valves are closed - use a shower cap for her head (do not allow her head and hair to get wet) - now with deflated - give her a good flush of Luke warm water - and I really let the water wash her out - no rush job - a good flushing

After which ensure all the water has gone flip her over a few times get all those water drop lets out - I use a towel under her TPE inserts too - I also blow air into the inserts -
I have a kool double action hand pump that puts a lot of air in there - the idea is to get the insert dry - lite tamping with a soft towel is okay - but no harsh rubbing - as the TPE insert can tear from pulling

let her dry over night/ day - I use a 24 Hour period - but as long as she is dry to the touch - she's ready for her next mission - :idea:

Word on mold and TPE - make sure you get all the moisture out of her TPE inserts before storing the doll - TPE isn't silicone - and mold can grow on a TPE insert - especially in the summer time when room moisture levels are higher Versus winter when the levels are lower (science or not - don't store a wet doll) - also

- Why a shower cap for her head - this and a great many other air doll have hundreds of tiny holes to attach the hair - once water is introduced to those holes on her head - it can't come out and becomes a breading ground for mold and once in there - the mold can't be removed - keep her hair/ head dry

Air on

Citlinho_75
Active Poster
Active Poster
Posts: 54
Joined: Fri Sep 15, 2017 5:28 am
Contact:

Re: My dear Diaoshi

Post by Citlinho_75 »

yorktown wrote:8) Hola

Great question - Citlinho_75 - :thumbs_up:

The TPE inserts of the Daio Shi air babe should be cleaned out after each flight - or that is what I do -

Here is how I do it to her

With the air babe fully deflated - make sure air valves are closed - use a shower cap for her head (do not allow her head and hair to get wet) - now with deflated - give her a good flush of Luke warm water - and I really let the water wash her out - no rush job - a good flushing

After which ensure all the water has gone flip her over a few times get all those water drop lets out - I use a towel under her TPE inserts too - I also blow air into the inserts -
I have a kool double action hand pump that puts a lot of air in there - the idea is to get the insert dry - lite tamping with a soft towel is okay - but no harsh rubbing - as the TPE insert can tear from pulling

let her dry over night/ day - I use a 24 Hour period - but as long as she is dry to the touch - she's ready for her next mission - :idea:

Word on mold and TPE - make sure you get all the moisture out of her TPE inserts before storing the doll - TPE isn't silicone - and mold can grow on a TPE insert - especially in the summer time when room moisture levels are higher Versus winter when the levels are lower (science or not - don't store a wet doll) - also

- Why a shower cap for her head - this and a great many other air doll have hundreds of tiny holes to attach the hair - once water is introduced to those holes on her head - it can't come out and becomes a breading ground for mold and once in there - the mold can't be removed - keep her hair/ head dry

Air on
The fixed vagina and anus is TPE? I'm still a bit lazy about it. As for the care with the head I understood well.

User avatar
yorktown
Doll Elder
Doll Elder
Posts: 3338
Joined: Sun Oct 18, 2009 12:00 am
Location: Biergarten
Contact:

Re: My dear Diaoshi

Post by yorktown »

8) Hola

Si` the TPE insert on all inflatable dolls are made from TPE/ TPR not silicone - if they were made of silicone the price would easily double - Silicone is a very good material - and these doll makers all use cheaper TPE - easier to manufacture and costs are much lower

The only air babe I know that uses Silicone is the French extra cost poupee-latex dolls with the sweet insert or the other extra cost options - that include a Silicone insert

Doll makers claim much - but honestly in the end its always just plastic

Citlinho_75
Active Poster
Active Poster
Posts: 54
Joined: Fri Sep 15, 2017 5:28 am
Contact:

Re: My dear Diaoshi

Post by Citlinho_75 »

So the doll itself is showing its TPE parts and the question is how to clean inside the holes of happiness. :o
Attachments
doll_05.jpg
doll_05.jpg (83.27 KiB) Viewed 5767 times
doll_04.jpg
doll_04.jpg (79.31 KiB) Viewed 5767 times

Citlinho_75
Active Poster
Active Poster
Posts: 54
Joined: Fri Sep 15, 2017 5:28 am
Contact:

Re: My dear Diaoshi

Post by Citlinho_75 »

Scenes from the first day of November. Day with a fine drizzle and wind coming through the window...
Attachments
doll_06.jpg
doll_06.jpg (140.77 KiB) Viewed 5606 times
doll_07.jpg
doll_07.jpg (92.17 KiB) Viewed 5606 times

User avatar
ottto44
Senior Member
Senior Member
Posts: 288
Joined: Thu Feb 05, 2004 12:00 am
Contact:

Re: My dear Diaoshi

Post by ottto44 »

She looks great!

Unknown03
Former Member
Posts: 2765
Joined: Sat Feb 06, 2016 12:08 pm

Re: My dear Diaoshi

Post by Unknown03 »

Your lady looks lovely. Actually, I have her twin sister who joined me and my silicone doll, Luna, two weeks ago. I posted a picture of her in a black vinyl catsuit here:
https://www.dollforum.com/forum/viewtop ... 7#p1195657
She's great for sex, honestly perhaps better than my silicone doll from a purely sexual viewpoint. (Though she's not as good of a kisser... her lips are a bit rigid, and definitely not open enough for oral sex even though there's a squeeze pump to make her mouth squeeze what I assume should be an erect penis.) I do find that cleaning her is a challenge due to the fixed tpe vagina. I have a pump sprayer that I fill with water and antibacterial soap which I squirt into her after deflating and holding her over a bucket. I then rinse with the sprayer and insert an aquarium air hose into her overnight to thoroughly dry her out. My older inflatable with an insert sleeve was so much easier... but not as good looking or sexy. Have fun with her!

Post Reply

INFORMATIONS