Perfect 10- is she really that bad?
Re: Perfect 10- is she really that bad?
The story of this photo shoot is a bit interesting as I didnt plan to do it. What happened is, I laid Rebecca on the bed to get back her little later. When I entered the room again, suddenly forgot to turn the lamp on and the vision receiving me was so mystic and hot She was lying there in the dark and the little light outside illuminated parts of her body. Her legs were so sexy like that, I immedaitely knew I had to try to record it. Unfortunately could not really do it as the camera activated the flash with most programs. And with the standard settings (no flashing) it was too dark and could not see anything really. But anyway, i played around with the different settings and programs on my camera and made some photos that you might like
The monochrome settings was probably the best to show how I saw her legs in the dark Vivid colours: Finally my all time favourite of her now The program which darkens the edge of the picture. Made her so sexy! Really like that only the upper part of her right thigh is visible and the colours hightlight how shapely it is. I hope you like these pics enjoy your holidays!
Re: Perfect 10- is she really that bad?
The AirHeads!
Brandi - (A Brandy Big Boobed Doll/China)
Becky - (Sexy & Playful Cyberskin Doll/Pipedream)
Candi - (Tyra Black Doll/Germany)
Ginger - (A.L.I.S.S.A. BBW Doll/Russia)
Jennifer - (LoveToy Super Boobie Blonde Love Doll/Hong Kong)
Hannah - (Hannah Blow Up Doll/NMC)
Re: Perfect 10- is she really that bad?
Re: Perfect 10- is she really that bad?
Just a quick note about - lubricants for use with - inflata- babes/ air dolls/ blow up dolls - always try to use a water based lube -
I have found that almost all plastic items degrade rapidly with oil based products - from seam failures to near destruction to TPE items
All quality water based lubes are "ok" to use with air dolls - yeah, yeah I know they almost always give you a tube of some sort of water based lube inside the box with the inflata babe - but - that is always a cheap water based item that looses its lubricating properties within a thrust or two -
A silicone lube is also an idea - I find they make clean up harder and dry very sticky {requiring quick clean up} but retain very good lubricating properties - so a slippery good fun with them - - try them for your tightest air babes - they will be tight no more
I have read many a member here use all sorts of faux lubricants - trust me the best thing for both - "you & dolly" - is a good quality water based lubricant - Amazon has tooooooo many to list here - try one and you will never go back to anything else -
Sorry to hear about Rebecca the Perfect 10 air babe - there isn't really a way, I know to revive the TPE inserts from this type of condition - chemistry was never my scene -
Re: Perfect 10- is she really that bad?
The AirHeads!
Brandi - (A Brandy Big Boobed Doll/China)
Becky - (Sexy & Playful Cyberskin Doll/Pipedream)
Candi - (Tyra Black Doll/Germany)
Ginger - (A.L.I.S.S.A. BBW Doll/Russia)
Jennifer - (LoveToy Super Boobie Blonde Love Doll/Hong Kong)
Hannah - (Hannah Blow Up Doll/NMC)
Re: Perfect 10- is she really that bad?
Yes, yes - especially petroleum jelly- worse yet to any plastic as it destroys it
Stay with a Water Based lubricants only - or - silicone lubricants
No damage will ever come from their use VS the faux type lubes
Silicone lubricants have there place with inflata babes so don’t discount there useage
Try to clean off as much as possible the Vaseline - as you can to minimize the damage as quickly as possible-
Re: Perfect 10- is she really that bad?
Re: Perfect 10- is she really that bad?
Well obviously, it’s up to each of us to find the best way to get it on with the inflata- gang
Many moons ago I used all these same home remedies as well, but over a short period of time, I found that the air babes were suffering issues that couldn’t be remedied due to severe seam failure or that vinyl skin would fail in large sections
So sure all types get the job done, but if you are interested in keeping your air babe for a longer period of time, vinyl skin safe; then a water based lubricants must be used
Take my advice for what it is, merely a suggestion- if using or going a different way that’s totally good as it’s best for you-
Re: Perfect 10- is she really that bad?
Well, after talking so much about it, I decided to give another try and bought the Bio version of Aquaglide,which seems to be quite good. Still does not make the doll as slippery as baby oil but relatively satisfied. One big problem with it , is that it does not get absorbed by the insert the baby oil always got absorbed/disappeared after a little time. but with this, even after some hours it was still sticky inside when I pushed my finger inside. I could relatively clean her with tissues but cant go really deep. Does it cause any problem for the insert if lubricant stays inside?yorktown wrote: Howdy
Well obviously, it’s up to each of us to find the best way to get it on with the inflata- gang
Many moons ago I used all these same home remedies as well, but over a short period of time, I found that the air babes were suffering issues that couldn’t be remedied due to severe seam failure or that vinyl skin would fail in large sections
So sure all types get the job done, but if you are interested in keeping your air babe for a longer period of time, vinyl skin safe; then a water based lubricants must be used
Take my advice for what it is, merely a suggestion- if using or going a different way that’s totally good as it’s best for you-
-
- Active Poster
- Posts: 96
- Joined: Tue Jan 29, 2019 2:38 pm
- Contact:
Re: Perfect 10- is she really that bad?
Re: Perfect 10- is she really that bad?
Really? DAMN. Back in the day (1980's) you had to schlep your ass down to CVS and get a tube of K-Y on your own.yorktown wrote:I know they almost always give you a tube of some sort of water based lube inside the box with the inflata babe
Folks today are spoiled. SPOILED. And get off my lawn! *shakes cane*
(BTW, on thread - Rebecca does look quite good all dressed up.)
----
(BUGS BUNNY cocks a thumb at the robot girl rabbit walking past)
BUGS: Mechanical.
(Robot girl rabbit turns and kisses BUGS, who goes all squishy)
BUGS: Well, so it's MECHANICAL!
Re: Perfect 10- is she really that bad?
I think as long as what you're using is water-based it just dries out and then reactivates when you put more lube in. At least that's what I've found with the onaholes I own.Malcolm77 wrote: Does it cause any problem for the insert if lubricant stays inside?
----
(BUGS BUNNY cocks a thumb at the robot girl rabbit walking past)
BUGS: Mechanical.
(Robot girl rabbit turns and kisses BUGS, who goes all squishy)
BUGS: Well, so it's MECHANICAL!
Re: Perfect 10- is she really that bad?
Not to get into the "taste great vs less filling" debate of the beer wars of past -
I after use or as soon as possible - clean up both the air doll and inserts - using warm water and do a through flushing so that nothing is remaining behind
After which all are allowed to air dry in a warm place - for TPE as well as pouch type inserts - I place a paper towel inside to soak up any excess moisture for a day - then allow them to air dry a few more days after use
It help as I have a few dolls - so there in all states of readiness waiting for flight
I never like to leave an insert after use unclean - TPE is known to be a porous material and everything not good gets stuck in there - so the faster they are cleaned out the better, and to dry - for TPE powder after its dry to keep them soft and new
Again take my advice for what it's worth - its been my experience that certain things work better than others, and if a fast wham bam, thank ya mam; is all that's needed - well then
My flights of fancy with the Inflata - gang is a wee bit different - and I prefer the LTR with them - heck as the prices keep going north and certain types of the legacy line disappear - keeping these air gal pals around is a big thing -
Re: Perfect 10- is she really that bad?
The best way to keep them clean is to use a female condom. I did not really do that because they are quite expensive, but now i found a seller on aliexpress who sells them relatively cheap. So will get some soon