Please show me your requirement for future TPE sex doll

shotdot · Post by **shotdot** » Mon Apr 16, 2018 12:28 pm

If I were a manufacturer, I would run a poll counting votes per each compelling feature, before actually bothering implementing it. Only one such a feature doesn't need a poll: weight reduction. However, decreasing weight is not simple. Here is a simple feature, that gathered 45% of voters -- sealing anal hole.

Quater · Post by **Quater** » Mon Apr 16, 2018 4:29 pm

As a substantial weight reduction of TPE dolls seems to be technically very difficult, I would be interested a modular doll a la the so-called RZRZN doll project, with detachable arms and legs.

Perhaps you could make a detachable limbs variety of your 155 cm doll, which weighs 30 kg with head. I don't know how many kg the arms and legs weigh on this doll, but assuming the head is 2 kg, each arm weighs 1.5 kg and the legs are 2.5 kg apiece, the torso alone would weigh 20 kg, and the doll would be very easy to maneuver and stash.

LDF · Post by **LDF** » Mon Apr 16, 2018 4:45 pm

Realistic vagina and anus placement and orientation.

Even if it takes a redesign of the skeleton and molding process, it needs to be done.

Watch for the large rotational molding machine for a hint at how to lighten TPE dolls.

ranger6538 · Post by **ranger6538** » Mon Apr 16, 2018 4:56 pm

Agree, as posted that Realism is better than exaggerated body types like the dolls with very large breasts.

Post by **lilbitlonely** » Mon Apr 16, 2018 5:23 pm

Jointed toes that we can pose - all toes move as one, so the doll can stand in high-heeled shoes, or flat shoes.

lover1 · Post by **lover1** » Mon Apr 16, 2018 6:03 pm

Constant lubrification, realistic throat and tongue, standing feet without visible screws.

Merida · Post by **Merida** » Mon Apr 16, 2018 7:04 pm

Stain resistant TPE coating! Can it be done?

Carbon fiber skeleton for light weight! Hollow thorax perhaps?

Mature looking faces late 20's early 30's look.

More eye variety (colors, shades).

Integrated eyelids.

More faces with a realistic and natural gentle smile. Not collagen over inflated lips.

I agree with the realism comments.

shotdot · Post by **shotdot** » Mon Apr 16, 2018 7:32 pm

Realism is great, but at the end of the day, it is the customer who vote with their wallets. If there is a demand for torpedo boobs, then, it is silly for a manufacturer to not to offer it. I suggest that the number of offerings in each cap category should be proportional to the number of people buying it. It would be just financially naive for a manufacturer not to adjust their offering spectrum to the customer demand. In fact, there is TDF poll of preferred cap size, and, as long time A- and B-cup fan, I'm sorry to report that the number of people who like it is only 15% or so.

On the other hand, this forum provides a skewed perspective. It would be interesting to run the boob size preference poll among the chinese. Why does it matter? Because, there is huge excess of males over females there -- 41 million or so. That's right, the doll industry is looking into potential sales volume in millions. And if i were manufacturer, I would be concentrating my effort on how to reduce the cost to remain competitive, rather than chasing obscure features. Those absurd $1700/doll prices are not sustainable. I see irontech dolls on aliexpress around $1000 mark, which is a step in the right direction, but is still above what is available on chinese market.

Alec79 · Post by **Alec79** » Tue Apr 17, 2018 12:18 pm

LDF wrote:Realistic vagina and anus placement and orientation.

I'm definitely on board with this one!

Post by **irontechdoll** » Tue Apr 17, 2018 9:40 pm

sean301 wrote:
LDF wrote:Realistic vagina and anus placement and orientation.
I'm definitely on board with this one!

We will try to make it more natural as real woman for the new doll coming soon. The pussy is real vagina anus moulded this time. Let us just wish for the new porn star doll ready soon.

jokerisalive · Post by **jokerisalive** » Tue Apr 17, 2018 9:51 pm

lightweight skeletons, less fragile hands and feet maybe stain resistant tpe coating or newer tpe mixtures will be better in time. hopefully tpe can be made better to be less resistant to tears or seperation cuz its to high maintenance now. maybe a rubber like material more firm but able to flex and not tear. the lightweight skeleton with a firmer material would allow for standing as well as weight placed on joints or hands without worries of pokes or tears. no more wires in fingers but jointed or heavy bendable wire with no pointed edges. lots of possibilities. a rubbery material that doesnt bleed oil or absorb moisture would be the best imo so no oiling or powdering everytime you use the doll or for maintenance due to weak materials.

Jakeelliot100 · Post by **Jakeelliot100** » Tue Apr 17, 2018 10:26 pm

If you made a hand that was not poseable but did did not break i think many people would prefer that. I would take hands in a permanent nuetral position but that had no wires to break or disconnect in a heartbeat.

WhataTimeToBeAlive · Post by **WhataTimeToBeAlive** » Wed Apr 18, 2018 2:34 am

irontechdoll wrote:We will try to make it more natural as real woman for the new doll coming soon. The pussy is real vagina anus moulded this time.

This is exactly the way to go!

Nature did a good job in designing our tools for procreation, which is arguably our most important tool.

Post by **irontechdoll** » Wed Apr 18, 2018 3:08 am

WhataTimeToBeAlive wrote:
irontechdoll wrote:We will try to make it more natural as real woman for the new doll coming soon. The pussy is real vagina anus moulded this time.
This is exactly the way to go!

Nature did a good job in designing our tools for procreation, which is arguably our most important tool.

Yea, exactly. We are excited to wait for seeing her later soon.

Dollsampler · Post by **Dollsampler** » Wed Apr 18, 2018 5:23 am

I concur with a lot of comments above regarding the benefits of lifelikeness of dolls bodies dimensions and organs détails.
Do you know that Western YOUNG women altough we love them a lot have the following distribution of breast sizes:
about 68 per cent A or B cup
about 30 per cent C cup
about 2 per cent D cup or more
Furthermore I found that the best breast touch feelings and weight shaping and" flowing" aspects are achieved when the breasts are made solid BUT with the very soft TPE( with fruity smell) Hollow breasts are fragile (air deflation) and not weight realistic. Breasts sized D, E or F looks more lifelike (and even acceptable) if made that way; If they are hollow for these sizes they look and behave like balloons or artificial breast implants.

Tall dolls (from 160cm onwards) are no more that tall as western average young women height is 165 cm (for men it is 172cm) But of course the problem is the weight. I plan to solve that by using the PATIENT LIFTERS used for disabled people. They cost (weight limit 150 kgs and electrically powered) in second hand market about 400 USD) that device allow the doll manufacturers to make actresses perfect lifelike bodies; 165cm BWH 87 62 87 cup c or 165 90 62 87 cup E and so on weighting about 45 kgs.(as far as unfortunately the density of TPE dolls is about one like the human body
For example the ASDOLL 166 muscular 85 59 90 (plus) cup B,C I just received is incredibly lifelike looking as far as all body dimensions (legs lenght, thigh diameter calves diameter...) are concerned ( not necessarily all of the muscular side though) but weight about 45 kgs.
A taller lifelike body would be 170cm BWH 90 64 90 cup c and weight 10 per cent more than the 168 cm (about 50 kgs)
A smaller lifelike body would be 160 BHW 85 60 85 C cup and would weight about 40 kgs to respect normal lifelike legs lenght and thigh and calves diameter.
And so on (similarity laws respected by using height percentage change )

Another problem is the dolls heads. Manufacturers increase the height of their dolls and use the same head however. They sheet a little by using big volume wigs for tall bodies.
Some are now making heads for 168 cm dolls and consequently the doll turn into a 170cm plus doll. The rule I use is
Head for 125 to 150 cm tall body head height from top head to chin 19 cm
Head for 150 to 160 cm tall body head height from top head to chin 20-21 cm That is unfornatelyvery often the standard size used from 140 to 172 cm bodies !
Head for 160 to 175 cm tall body head height from top head to chin 23 cm Very difficult to find such dimension!
Of course 160-170 cm dolls with narrow (not so lifelike average) shoulders (33-34 cm) accomodate satisfactorily the standard head size (21 cm) But the rules of lifelikeness for average Young women is for the shoulder width 150 cm about 33cm 160 cm 35 165 cm 37 170 cm 39

Standing feet is really a plus for the doll for many reasons. The bolts are really a problem. I will solve it using Metric 6 bolts with heavy duty RUBBER head made by the industry for heavy Furnitures height adjustments.(three USD (one big rubber and two small per foot) cost per each foot) They may be painted the same color as the feet with a plastic c sheet insulating ( underneath )the rubber from the TPE. The doll when standing is Two to three cm taller. They may be unscrewed easily when the doll is lying and refitted afterwards.

The hands is a minor problem provided manufacturers supply with extra fee a soft plastic wrapping glove-box ( easily installed and removed with straps bands fitting) we use only when the doll is manipulated without great care.