Page 1 of 2

Should IRON TECH make an A CUP like her?

Posted: Sat Sep 15, 2018 11:04 am
by Booty Call Dolls
https://www.instagram.com/p/BmJSjT8hoR7 ... -by=yael1c
https://www.instagram.com/p/BlTYSudnsjo ... -by=yael1c

ALCON,
IT is listening.
A cups can be SEXY, very HOT
What are your thoughts on a SUPER MODEL line?
I mean tall ladies.....
165 CM and taller!
BCD

Re: Should IRON TECH make an A CUP like her?

Posted: Sun Sep 16, 2018 12:08 am
by Alucard1959
I'm all for it! Do it! If she looks like the pictures you included in your post. What a GREAT ASS! I've been looking for a taller doll that wasn't 100 lbs.All the dolls at the 165-170+ cm size I've seen are way too heavy for me.

Re: Should IRON TECH make an A CUP like her?

Posted: Sun Sep 16, 2018 9:56 am
by Dollsampler
Should be good to quote her measurements as she look thiner (only a little bit) than AYUMI (170-172cm))
I have a slender IRT doll the 169 (height 165 cm) which weight already 38 kgs and has a shorter waist line than this model.
AYUMI (29 years old) 168 (height 170-172cm) weight already 43 kgs plus and is of a slender type also. Her measurements are almost exactly the one of the average 170cm model used by the European manufacturer to design the standard average 17-19 years old women clothes!
There are ways (I own two dolls of good quality made that way) to cut off at low cost the weight of such life-size body by at least 6 kgs but manufacturers apparently dont bother too much.An hollow chest box and big diameter hips skeleton pipes are one example of severe weight reduction achievement.Of course the hollow chest box and the option for moveable shoulders should be adapted for compatibility.

Re: Should IRON TECH make an A CUP like her?

Posted: Sun Sep 16, 2018 12:25 pm
by manfredixon
Nah, too skinny for my taste. But I like the idea of slightly taller dolls. And I also don't min A-cups, as well as B and C. D and beyond aren't for me either. The optimal doll for me, personally, would be something like the WM162C, with slightly thicker thighs and waist. Makes clothes fit a lot better, and feels more like your average girlfriend. But again, that's just me.

Re: Should IRON TECH make an A CUP like her?

Posted: Sun Sep 16, 2018 1:22 pm
by Maecer
A good description, I think would be for a pear shaped lady; she can be petite in the torso, and have some fine ass and legs. For me, the final detail will come down to how they execute the breast; are they perky mounds? Nicely erect nipples, but not too long? Not too small though. Maybe some puff in the areola? I've seen many a sexy lady with tits like those.

Re: Should IRON TECH make an A CUP like her?

Posted: Sun Sep 16, 2018 2:30 pm
by pdkh2000
Well as always I am in for a skinny long legged and flat chested girl :D

Re: Should IRON TECH make an A CUP like her?

Posted: Sun Sep 16, 2018 4:07 pm
by AGL
I'd say yes, just make sure she's got nice nipples! :)

Re: Should IRON TECH make an A CUP like her?

Posted: Sun Sep 16, 2018 6:28 pm
by DexterQuest
Getting closer. I'm more thinking a Bridget Malcom type when she isn't wearing a push-up. Bridget's butt is much preferred.
There are already dolls with a small top and curvy bottom.

Re: Should IRON TECH make an A CUP like her?

Posted: Mon Sep 17, 2018 6:48 am
by Dollsampler
Hello dexterquest,
Bridget Malcom is Indeed very beautifull and thin (fitness type). However she is 179cm tall, her measurements are 84 61 90 and she weight 55 kgs.(similar to Angelina Jolie)
A doll moulded from her body should weight 45 kgs at least as the 172cm doll AYUMI 86 62 96 weight 43 kgs
Also a lot of dolls owners dont feel tall enough for that size.Average Western world men height (all ages) is 172cm.The 180cm tall and higher men sample is in the 15 percentile only(all ages).

However personnaly all my life as I have been focused and attracted by fitness look I have been dating non overweight women by choice (I never saw a Cup bigger than C in that category).
Nowadays 50 per cent of women are overweight and 30 per cent are obese. I am not surprised that some men like that also.

Re: Should IRON TECH make an A CUP like her?

Posted: Mon Sep 17, 2018 10:46 am
by Dollyman25442
Something along these lines please.
I'm a buyer (and Jeff can vouch for that).

Re: Should IRON TECH make an A CUP like her?

Posted: Thu Sep 27, 2018 9:04 am
by stacy718
Great body, but her face... Her face..

No.

Re: Should IRON TECH make an A CUP like her?

Posted: Thu Sep 27, 2018 10:09 am
by Dollyman25442
Seems the constant drawback super tall dolls is shins abnormally long. If they make one it should be elongated in appropriate areas (thighs as well as shins, torso and neck)

Re: Should IRON TECH make an A CUP like her?

Posted: Thu Sep 27, 2018 12:14 pm
by MannyCan
Svelt is so nice.
Svelt and large B (or small C) is where my mind's at.

Re: Should IRON TECH make an A CUP like her?

Posted: Sun Oct 14, 2018 5:23 pm
by Dollicious2
The answer is
Hell Yeah !

A 165 cm just like ❤❤❤ Yael1c ❤❤❤ is exactly perfect !
Here is her latest little video https://www.instagram.com/p/Boze0IuhWBj ... asbjfzyyo7

I have the 172cm b cup bodys both with solid and hollow breasts.
I long for a tall doll like this with more natural looking small breasts just like Yael1c has .
I have reduced the air out of (Yaelana) my 172cm with hollow breasts and they turned out really nicely.

I am really hoping Iron tech can achieve the wide smaller looking breasts and the way the buttocks has the extra muscle in the back near the crotch , it's really a sight to behold that ass :mrgreen:

And ! She is nice and slim so yes she will be less heavy then most even with super realistic body dimensions.

Of course there are many women that can inspire us and I have a few pics of a couple others as well here but i would base her off Yael1c just as this is the ideal body type and she is a extraordinary beauty to behold as well with her middle eastern sexiness.
20181014_121629.png
20181014_121629.png (406.78 KiB) Viewed 1531 times
20181014_161631.png
20181014_161631.png (358.45 KiB) Viewed 1531 times
20181014_121438.png
20181014_121438.png (341.06 KiB) Viewed 1531 times
20181014_164213.png
20181014_164213.png (722.58 KiB) Viewed 1531 times
20181014_164040.png
20181014_164040.png (411.24 KiB) Viewed 1531 times
20181014_164009.png
20181014_164009.png (540.14 KiB) Viewed 1531 times
20181014_124039.png
20181014_124039.png (725.7 KiB) Viewed 1531 times
20181014_164102.png
20181014_164102.png (526.79 KiB) Viewed 1531 times
20181014_170632.png
20181014_170632.png (469.09 KiB) Viewed 1531 times
And ! Please get the Collar Bones looking like hers
Adds amazing amounts of realism
20181014_163810.png
20181014_163810.png (701.14 KiB) Viewed 1531 times
20181014_123821.png
20181014_123821.png (594.97 KiB) Viewed 1531 times
Sex Robot's!
20181014_164251.png
20181014_164251.png (503.32 KiB) Viewed 1531 times
Enough Photos ?
:haha4:
:glou:
DL2

Re: Should IRON TECH make an A CUP like her?

Posted: Sun Oct 14, 2018 6:00 pm
by Alottahope
Heaven for an ass! Very nice! I'm with Stacy on her face. A bit too masculine. But still somewhat unconventional beauty. A lot of RealDolls already look like her. But that ass is just so dreamy! I bet she has totaled many cars as she walks down the street!