Sanhui 168 with Maybelle face. Feb 2019 - review!
Re: Sanhui 168 with Maybelle face. Feb 2019 - review!
- Anonmyousblue
- Contributing Poster
- Posts: 31
- Joined: Tue Mar 17, 2015 9:42 pm
- Contact:
Re: Sanhui 168 with Maybelle face. Feb 2019 - review!
- Maviarab
- Doll Patriarch
- Posts: 4502
- Joined: Fri Jan 25, 2008 12:00 am
- Location: At one with the Schwartz
- Contact:
Re: Sanhui 168 with Maybelle face. Feb 2019 - review!
Silicone heads do not do this, this just a TPE issue due the suction created and air around the cavity.Ron NB wrote:I wanted to ask an owner about this before I ask the manufacturer. Does current SH heads have inner rigid structure, like a stylized skull so the eyes don't get pushed outwards and the face does not deform around the nose when it comes to oral action ?
Re: Sanhui 168 with Maybelle face. Feb 2019 - review!
Thanks for answering, the deformation is a real immersion breaker with TPE dolls .Maviarab wrote:Silicone heads do not do this, this just a TPE issue due the suction created and air around the cavity.Ron NB wrote:I wanted to ask an owner about this before I ask the manufacturer. Does current SH heads have inner rigid structure, like a stylized skull so the eyes don't get pushed outwards and the face does not deform around the nose when it comes to oral action ?
Re: Sanhui 168 with Maybelle face. Feb 2019 - review!
Hello , I have a 168 SH 2019 and i can tell you that for oral action she's stunning !Ron NB wrote:Thanks for answering, the deformation is a real immersion breaker with TPE dolls .Maviarab wrote:Silicone heads do not do this, this just a TPE issue due the suction created and air around the cavity.Ron NB wrote:I wanted to ask an owner about this before I ask the manufacturer. Does current SH heads have inner rigid structure, like a stylized skull so the eyes don't get pushed outwards and the face does not deform around the nose when it comes to oral action ?
No noise , no deformation, no eyes rolling !
- Lustforlife
- Senior Member
- Posts: 294
- Joined: Sun Dec 20, 2015 6:56 pm
- Contact:
Re: Sanhui 168 with Maybelle face. Feb 2019 - review!
-
- Apprentice
- Posts: 17
- Joined: Wed Feb 13, 2019 3:38 pm
- Contact:
Re: Sanhui 168 with Maybelle face. Feb 2019 - review!
- haremlover
- Doll Visionary
- Posts: 16238
- Joined: Tue May 26, 2009 12:00 am
- Location: UK and South of France
- Contact:
Re: Sanhui 168 with Maybelle face. Feb 2019 - review!
Congratulations.
Best wishes
Harem
Chloé's book
is available from The-Doll-House
- - - -
Here's Coverdoll Yolanda
- - - -
Reviews for:
-DS-OR-JY-SY-Jarliet-Vivid-SM-SE-ZOne-JM-Sino-Sanhui-Pipedream--XY-WM-Elsa Babe-SM Silicone Siliko-XYcolo-Starpery-Elsa Babe-FutureDoll-Zelex-Irontech-FJ Doll
- - - -
YouTube Doll Review Channel
-https://www.youtube.com/@sexdoll-reviews-
- gonestill77
- Doll Guru
- Posts: 5180
- Joined: Sat Jan 02, 2016 1:33 am
- Location: Michigan
- Contact:
Re: Sanhui 168 with Maybelle face. Feb 2019 - review!
I have a 2016 Sanhui 145 and her face is fine during oral.serge wrote:Hello , I have a 168 SH 2019 and i can tell you that for oral action she's stunning !Ron NB wrote:Thanks for answering, the deformation is a real immersion breaker with TPE dolls .Maviarab wrote:Silicone heads do not do this, this just a TPE issue due the suction created and air around the cavity.Ron NB wrote:I wanted to ask an owner about this before I ask the manufacturer. Does current SH heads have inner rigid structure, like a stylized skull so the eyes don't get pushed outwards and the face does not deform around the nose when it comes to oral action ?
No noise , no deformation, no eyes rolling !
I actually get some good suction that makes a nice slurping noise.
No complaints......
Lucinda- 2015 DS 163 plus
Eves thread http://dollforum.com/forum/viewtopic.php?f=261&t=70866
Lucinda's thread viewtopic.php?f=143&t=128707
My doll cleaning and drying video viewtopic.php?f=7&t=127010
Eve and Lucinda's thread viewtopic.php?f=87&t=129480
Eve and Lucinda's dirty movies. viewtopic.php?f=87&t=126968
Re: Sanhui 168 with Maybelle face. Feb 2019 - review!
So I take it your 168 is also crazy tight? Do you also have a real hard time straightening the leg? Sometimes I have to sit on the doll's stomach and push at the thigh in bursts to get it back down.Sofos wrote: Skeleton
The 168 comes with a ball joint chassis that I'm very impressed with so far.The joints move smoothly and you do not have to pay so much attention to the directions as you did with the old dual hinged joints. Compared to my 2 year old 156 cm Sanhui doll the joints are so much better (even compared to new) that I don't really know how to describe it.
There are some minor differences in how tight the left and right arm is but other than that all joints are great (it's a small difference, not a big deal at all). The hip joints are the tightest one but it still moves smooth once you ally the correct force (which can be all the strength you got sometimes ).
Also, did you notice an issue with calf not staying straight when bending the knees?
Do you have a picture of your head connector? I have the same head and body as you (made recently) and mine screws on.Sofos wrote:The head connector is wonderful! It is easy to snap on and off and a rubber ring ensures a smooth turn of the head without any wobbling or discomfort. This is 1000 times better than the old screw on version!
Re: Sanhui 168 with Maybelle face. Feb 2019 - review!
@Aeron
I answered you party via PM already...
But no, they are stiff but not crazy stiff. However, I must position both me and the doll correctly to be able to apply enough torque. But you must consider that there are considerable forces involved on the hip joint due to the long lever to the pivot point. So therefore the hip must be rather still to handle the load. I think...
It does sound like your joint may be stiffer though. But difficult for me to ascertain since objective measurements are difficult to obtain.
Not really noticed anything wrong with the knee bend.
This is the head connector and the included hanging hook:
The hanging hook screws in and the head is attached just by pushing.
-
- Active Poster
- Posts: 51
- Joined: Wed Apr 10, 2019 1:36 am
Re: Sanhui 168 with Maybelle face. Feb 2019 - review!
Re: Sanhui 168 with Maybelle face. Feb 2019 - review!
So can the old screw on heads still be used if you have an adapter? Like M6 threaded rod I believe. That should work, right?
- blindwebster
- Doll Elder
- Posts: 2551
- Joined: Sun Aug 08, 2010 9:53 am
- Contact:
Re: Sanhui 168 with Maybelle face. Feb 2019 - review!
- Olive
- Active Member
- Posts: 164
- Joined: Thu Mar 01, 2018 12:54 pm
- Location: La French Riviera
- Contact:
Re: Sanhui 168 with Maybelle face. Feb 2019 - review!
It's pretty recurrent with Sanhui, this one does not escape the ruleblindwebster wrote:Gorgeous. Incredible body on this doll.