Removal/ Replacement: "Breast Enhancement" Chapter 3
Re: Removal/ Replacement: "Breast Enhancement" Chapter 3
Estelle 3.0 viewtopic.php?t=163825
Estelle 2.0 viewtopic.php?f=11&t=114588
Anaya: WM148cm https://www.dollforum.com/forum/viewtop ... 11&t=97057
Estelle JY142cm https://www.dollforum.com/forum/viewtop ... 11&t=82971
More Estelle https://www.dollforum.com/forum/viewtop ... 11&t=83865
Fishface SY158cm : https://www.dollforum.com/forum/viewtop ... 11&t=83864
Re: Removal/ Replacement: "Breast Enhancement" Chapter 3
put one big balloon inside the breasts and fill it with real slime (no potato flour) and then seal the balloon.
just press the emty balloon through the hole and leave the opening outside so you can fill it
just pressing slime into the breasts is impossibe
to seal the hole it must be dry and that doesnt work if you just fill them with slime as it will pour out all the time.
putting the slime into a balloon and you can seal the hole properly.
stay tuned
big balloons ordered
and for the Gorilla Super GLue gel
forget it!
it doesnt work on TPE.
still waiting for the damn TPE glue
stay tuned
Re: Removal/ Replacement: "Breast Enhancement" Chapter 3
would not coagulate, but it's corrosive... I found that out the hard way with my first doll because I would clean her with it. Dish soap strips away all of the vital oils that keep the tpe soft and flexible. Shampoo is no good because it is designed to do the same, but only to a slightly lesser degree. I'm glad everyone is thinking in these terms though. We're really on the verge of changing the industry I think because we're trying to solve problems/ make improvements that manufactures haven't done —at least as far as I know.gregleg wrote:Hey, here's a thought, what about injecting liquid dish soap or shampoo into the breasts? The viscosity of the contents is less sticky than slime but still wouldn't that work? Plus it wouldn't coagulate over time.
I can say that my doll's breasts are still doing great with the paint.
Re: Removal/ Replacement: "Breast Enhancement" Chapter 3
Estelle 3.0 viewtopic.php?t=163825
Estelle 2.0 viewtopic.php?f=11&t=114588
Anaya: WM148cm https://www.dollforum.com/forum/viewtop ... 11&t=97057
Estelle JY142cm https://www.dollforum.com/forum/viewtop ... 11&t=82971
More Estelle https://www.dollforum.com/forum/viewtop ... 11&t=83865
Fishface SY158cm : https://www.dollforum.com/forum/viewtop ... 11&t=83864
Re: Removal/ Replacement: "Breast Enhancement" Chapter 3
Yes, a liquid might create a more lifelike feeling, but until a safe, stable one is identified, it seems like a risky venture, especially given the cost of a doll.
Thoughts?
*My juicy Cherry: viewtopic.php?t=154759
*Z-cup Moira: viewtopic.php?t=138543
*BBW Breanna: viewtopic.php?t=143116
*Yulia: viewtopic.php?t=122950
*Tina viewtopic.php?t=121819
*Aurora Jolie: viewtopic.php?t=106838
*World-famous Una Carha: viewtopic.php?t=93292
Re: Removal/ Replacement: "Breast Enhancement" Chapter 3
just putting slime into the breast doesnt work as it will pour out and make it impossible to seal the hole
i tried putting in a balloon and pump it up and seal it and it worked for a while (one day)
checking today and the balloon had broken.
problem with balloons is that they are so small som only 1dl of slime fits in them
it will take like 20 balloons to fill these YL150 breasts up.
but im thinking of making smaller ballons with slime in them and putting them into the breast.
as the balloons are not pumped up they should hold.
problem also is that you still get that softball feeling if you put slime into a balloon
it feels the same as it would be air in it just heavier.
im also thinking of trying small slimeballs to put in but they seem to light the ones that i have checked.
it would take 20 of these to reach 2kg lol
http://www.ebay.com/itm/Diggin-Slimebal ... SwEzxYTXGE
as for now i will leave it
pump in the normal air and seal the hole (when i get the damn TPE Glue)
as i said
if anyone finds a better material to use let me know.
i know the Busty Aichan has some kind of flubber ball inside the breasts.
that kind of ball and material should be perfect.
Re: Removal/ Replacement: "Breast Enhancement" Chapter 3
A lot of folks are wondering what an inflated/expanded 150 looks like. Do you have any other photos of your doll that you can post? They are certain to inspire people. Thanks.
*My juicy Cherry: viewtopic.php?t=154759
*Z-cup Moira: viewtopic.php?t=138543
*BBW Breanna: viewtopic.php?t=143116
*Yulia: viewtopic.php?t=122950
*Tina viewtopic.php?t=121819
*Aurora Jolie: viewtopic.php?t=106838
*World-famous Una Carha: viewtopic.php?t=93292
Re: Removal/ Replacement: "Breast Enhancement" Chapter 3
you "can" pump these breast up to crazy sizes lol
yes i have done it but it was not planned.
as i had to remove the first slime from the breast i just took a water hose into the hole and filled it with water.
the size of the breast before the water poured out was crazy.
i think it was 1.5 times bigger than usual.
really
this is a damn mess thats why i leave it for now
im glad that the TPE is so flexible that it havnt broken.
also the small hole stays the same
- lance uppercut
- Senior Member
- Posts: 349
- Joined: Sat Aug 27, 2011 6:25 am
- Contact:
Re: Removal/ Replacement: "Breast Enhancement" Chapter 3
Carl: Well, there's probably a lot of gods.
Lenny: Yeah, and some of 'em's gotta be chicks.
Carl: Yeah, with like a thousand boobs.
Lenny: Ooh hoo! That's the God I'm gonna worship!l.
Re: Removal/ Replacement: "Breast Enhancement" Chapter 3
@rev: What about a weather balloon?rev wrote:problem with balloons is that they are so small som only 1dl of slime fits in them
it will take like 20 balloons to fill these YL150 breasts up.
Re: Removal/ Replacement: "Breast Enhancement" Chapter 3
Many of us hoped you could share photos that clearly showed the inflated size, but it looks like that won't happen. Anyway, best of luck to you.rev wrote:let me put this way
you "can" pump these breast up to crazy sizes lol
yes i have done it but it was not planned.
as i had to remove the first slime from the breast i just took a water hose into the hole and filled it with water.
the size of the breast before the water poured out was crazy.
i think it was 1.5 times bigger than usual.
really
this is a damn mess thats why i leave it for now
im glad that the TPE is so flexible that it havnt broken.
also the small hole stays the same
*My juicy Cherry: viewtopic.php?t=154759
*Z-cup Moira: viewtopic.php?t=138543
*BBW Breanna: viewtopic.php?t=143116
*Yulia: viewtopic.php?t=122950
*Tina viewtopic.php?t=121819
*Aurora Jolie: viewtopic.php?t=106838
*World-famous Una Carha: viewtopic.php?t=93292
Re: Removal/ Replacement: "Breast Enhancement" Chapter 3
Maybe a thin 2-ply rubber ball? Not thick rubber like a tennis ball, but thin like a playground ball. They wouldn't split or puncture like party/air balloons, but might still be soft enough to not affect feel (particularly through a layer of TPE skin) and you could feel them with darn near anything: paint, soap, slime, whatever you want.rev wrote:if anyone finds a material that will hold let me know
just putting slime into the breast doesnt work as it will pour out and make it impossible to seal the hole
i tried putting in a balloon and pump it up and seal it and it worked for a while (one day)
checking today and the balloon had broken.
They make them in several sizes, includingh 5 inch and 6 inch which are probable suitable for most doll enhancements. You may have to cut a slit in the ball to inject your preferred filter but its much easier to reseal rubber than TPE.
Re: Removal/ Replacement: "Breast Enhancement" Chapter 3
a thicker balloon is needed for sureZZZZ wrote:@rev: What about a weather balloon?rev wrote:problem with balloons is that they are so small som only 1dl of slime fits in them
it will take like 20 balloons to fill these YL150 breasts up.
normal small balloons break even if they are listed to go up to 40cm when inflated
i have used two already and they doesnt hold up
the easy way is to just put in a thicker balloon and pump it up slight
it wont take much pressure to make these YL150 breasts bigger.
and they do can get big thats for sure
the TPE is at the largest places around 4-5cm thick so that wont break in the first place.
but then the size as they are normal is enough for me.
for more realistic softness its just better to release some airpressure and then seal the hole.
just use the air in them without pressure and seal to hole and they will feel really soft.
you dont need any over pressure of air in these breasts
Re: Removal/ Replacement: "Breast Enhancement" Chapter 3
you can pump them up to crazy sizes if you wantCF wrote: Many of us hoped you could share photos that clearly showed the inflated size, but it looks like that won't happen. Anyway, best of luck to you.
think of the huge breasts from 3D artwork and your close
balloons i have break so i wont fiddle with that anymore
same size as these breasts are no problem to get with the YL150
https://youtu.be/GuCqIcjGnak
Re: Removal/ Replacement: "Breast Enhancement" Chapter 3
yes a big slimeball that stays intact should be perfect.lance uppercut wrote:Ive also started to think of a way to thicken the slime so that it will remain as one mass instead of breaking into small blobs that will try to escape through any available exit.
let me know when and if you find the right recip.