Jaz-Lyn has been ordered!! WM 163CM Hcup #200 Head

Gordonis · Post by **Gordonis** » Thu May 17, 2018 10:10 am

...Later has arrived. The morning after specifically. There's a small tear in the vagina that could potentially turn into a big tear. I basically noticed the tpe splitting when I had her spread open to put in the insert. And then during fun time when I had her spread eagle the tear got slightly bigger unbeknownst to me. The lights were low to create atmosphere. I had her arms up over her head several times throughout as well and noticed two small tears on either side of the seem in her armpit. She is heavy but manageable for myself. I've decided going forward that spread eagle or arms over the head are no longer options as any further stress on these areas could result in further damage. In my research leading up to my purchase I'd read several horror stories of TPE tearing almost right away. So I was prepared for this. I do not regret my purchase in any way. In fact I'm still very happy with Jaz-Lyn. So glad she's come into my life. I haven't done any shopping for her yet and only have the pink nighty that they shipped with her. So I'll take some pics later on today with her in that.

BTW, my plan is to order some TPE glue for the tears. Does anyone know where I can get it fast rather than ordering from the original vendor and waiting for however long that takes.

Gordonis · Post by **Gordonis** » Thu May 17, 2018 11:36 am

: 20180517_090717.jpg (1.87 MiB) Viewed 1928 times

: 20180517_090707.jpg (3.24 MiB) Viewed 1928 times

: 20180517_090454.jpg (3.62 MiB) Viewed 1928 times

: 20180517_090436.jpg (2.99 MiB) Viewed 1928 times

: 20180517_085146.jpg (2.7 MiB) Viewed 1928 times

: 20180517_085146.jpg (2.7 MiB) Viewed 1928 times

: 20180517_085146.jpg (2.7 MiB) Viewed 1928 times

: 20180517_084359.jpg (3.07 MiB) Viewed 1928 times

: 20180517_084345.jpg (1.09 MiB) Viewed 1928 times

: 20180517_084336.jpg (1.6 MiB) Viewed 1928 times

: 20180517_084324.jpg (1.35 MiB) Viewed 1928 times

Gordonis · Post by **Gordonis** » Fri May 18, 2018 1:15 am

So I went out this afternoon and when I got back I found this lying in my bed.

: 20180517_202522.jpg (1.13 MiB) Viewed 1897 times

Gordonis · Post by **Gordonis** » Fri May 18, 2018 1:28 am

Maybe it's just me and my technique but I'm not able to stand her up and I did get the standing feet option. It's just that each time I try a different method of standing her up her legs buckle under the pressure. She's a heavy gal and not for the faint of heart. Anyone else having this issue or not at all?

miles mcbroom · Post by **miles mcbroom** » Fri May 18, 2018 8:53 am

left me breathless

Gordonis · Post by **Gordonis** » Fri May 18, 2018 6:53 pm

: 20180518_161909.jpg (2.46 MiB) Viewed 1861 times

: 20180518_161904.jpg (2.29 MiB) Viewed 1861 times

: 20180518_161522.jpg (1.3 MiB) Viewed 1861 times

: 20180518_161510.jpg (2.13 MiB) Viewed 1861 times

: 20180518_150320.jpg (2.31 MiB) Viewed 1861 times

: 20180518_150012.jpg (2.27 MiB) Viewed 1861 times

: 20180518_145328.jpg (2.65 MiB) Viewed 1861 times

: 20180518_145309.jpg (2.71 MiB) Viewed 1861 times

: 20180518_145302.jpg (2.58 MiB) Viewed 1861 times

: 20180518_145141.jpg (1.99 MiB) Viewed 1861 times

laintime111 · Post by **laintime111** » Fri May 18, 2018 8:58 pm

Those are some really nice shots! Thanks for sharing

089 · Post by **089** » Fri May 18, 2018 9:14 pm

Gordonis wrote:Maybe it's just me and my technique but I'm not able to stand her up and I did get the standing feet option. It's just that each time I try a different method of standing her up her legs buckle under the pressure. She's a heavy gal and not for the faint of heart. Anyone else having this issue or not at all?

Gordonis, mine is also very difficult to stand. Along with one leg being very loose, she also always wants to arch her back. There's no assembly-line like consistency in these dolls. I guess that just adds to their individuality.

I'm so glad Jaz-Lyn made it home safely. She looks amazing!

Gordonis · Post by **Gordonis** » Fri May 18, 2018 9:52 pm

089 wrote:
Gordonis wrote:Maybe it's just me and my technique but I'm not able to stand her up and I did get the standing feet option. It's just that each time I try a different method of standing her up her legs buckle under the pressure. She's a heavy gal and not for the faint of heart. Anyone else having this issue or not at all?
Gordonis, mine is also very difficult to stand. Along with one leg being very loose, she also always wants to arch her back. There's no assembly-line like consistency in these dolls. I guess that just adds to their individuality.

I'm so glad Jaz-Lyn made it home safely. She looks amazing!

I've managed to get her standing! I actually bought her sneakers and with the weight distributed to the base of the shoe rather than three screw heads...she stands!

terabyte · Post by **terabyte** » Fri May 18, 2018 10:18 pm

Gordonis wrote:...Later has arrived. The morning after specifically. There's a small tear in the vagina that could potentially turn into a big tear. I basically noticed the tpe splitting when I had her spread open to put in the insert. And then during fun time when I had her spread eagle the tear got slightly bigger unbeknownst to me. The lights were low to create atmosphere. I had her arms up over her head several times throughout as well and noticed two small tears on either side of the seem in her armpit. She is heavy but manageable for myself. I've decided going forward that spread eagle or arms over the head are no longer options as any further stress on these areas could result in further damage. In my research leading up to my purchase I'd read several horror stories of TPE tearing almost right away. So I was prepared for this. I do not regret my purchase in any way. In fact I'm still very happy with Jaz-Lyn. So glad she's come into my life. I haven't done any shopping for her yet and only have the pink nighty that they shipped with her. So I'll take some pics later on today with her in that.

BTW, my plan is to order some TPE glue for the tears. Does anyone know where I can get it fast rather than ordering from the original vendor and waiting for however long that takes.

Those curves are to die for! She is stunning, and she looks absolutely smoking hot with the blonde hair and glasses!

The TPE glue, I ordered some RLSD and I think it only took 3 days get to me, I think they ship priority mail.

I've also learned getting the larger dolls to stand can be tricky, especially if they have large breast and booty's. I have a 170 and I can get her to stand however you have to make sure the foot screws are set right and her leg/knee bends are straight out. Easiest way for me is to lay the doll on the bed and bend the legs over the edge, if you can "kick" the leg straight up you should be good, if not you will have to rotate the knee joint. The larger dolls also usually need a 3rd point of contact to balance against as I don't think they can free stand, I could be wrong though.

SquezzeMe · Post by **SquezzeMe** » Sun May 20, 2018 4:17 pm

Gordonis wrote:
089 wrote:
Gordonis wrote:Maybe it's just me and my technique but I'm not able to stand her up and I did get the standing feet option. It's just that each time I try a different method of standing her up her legs buckle under the pressure. She's a heavy gal and not for the faint of heart. Anyone else having this issue or not at all?
Gordonis, mine is also very difficult to stand. Along with one leg being very loose, she also always wants to arch her back. There's no assembly-line like consistency in these dolls. I guess that just adds to their individuality.

I'm so glad Jaz-Lyn made it home safely. She looks amazing!
I've managed to get her standing! I actually bought her sneakers and with the weight distributed to the base of the shoe rather than three screw heads...she stands!

Jaz-Lyn is beautiful, glad she made it home, love the photos as well. Yes, the sneakers are a must for standing. I will have to post a few of my Esra standing. Also, the cap bolt covers that manniquinFan makes will help with the damage in the leg-hose and shoes. Enjoy that fine lady.

Gordonis · Post by **Gordonis** » Mon May 21, 2018 1:32 am

Took some more shots today.

: 20180520_224255.jpg (1.33 MiB) Viewed 1735 times

: 20180520_223155.jpg (1.42 MiB) Viewed 1735 times

: 20180520_223128.jpg (1012.08 KiB) Viewed 1735 times

: 20180520_151240.jpg (1.55 MiB) Viewed 1735 times

: 20180520_151219.jpg (1.65 MiB) Viewed 1735 times

: 20180520_151019.jpg (2.11 MiB) Viewed 1735 times

: 20180520_150557.jpg (1.39 MiB) Viewed 1735 times

: 20180520_150412.jpg (1.65 MiB) Viewed 1735 times

: 20180520_150246.jpg (1.48 MiB) Viewed 1735 times

Gordonis · Post by **Gordonis** » Mon May 21, 2018 1:38 am

: 20180520_224431.jpg (1.58 MiB) Viewed 1735 times

: 20180520_224414.jpg (2.07 MiB) Viewed 1735 times

Dr Dollinger · Post by **Dr Dollinger** » Mon May 21, 2018 11:13 am

WOW!!
Congrats Gordonis!
She looks really gorgeous

I love that short blonde wig
Jaz-Lyn has her own personality - that's for sure!

Gordonis · Post by **Gordonis** » Mon May 21, 2018 12:02 pm

Dr Dollinger wrote:WOW!!
Congrats Gordonis!
She looks really gorgeous
I love that short blonde wig
Jaz-Lyn has her own personality - that's for sure!

Thanks so much!! The blonde is definitely my favourite look for her. I've purchased other wigs at the same time but the blonde gets me every time. As the great philosopher Rod Stewart once said, they really do have more fun!!