Indigo's Individual TPE Repair Kit - Updates
Indigo's Individual TPE Repair Kit - Updates
I would like to introduce you the new TPE repair kit "comfort".
With the focus on smoothing and finishing process the whole kit became more comfortable.
Therefore I added
- solvent "Smoother" (soft solvent mixture for easy smoothing all kinds of repairs)
- solvent "Finsiher" (a "breath", bringing back the original matt effect of the TPE surface)
- white oil (pure mineral oil with very low viscosity (15mPas) for refreshing and saturation of the repair)
Content of the TPE repair kit "comfort":
15 ml / 0.5 oz TPE paste in medium consistency in air-tight brown bottle
10 ml / 0.33 oz solvent "Preparer"" in air-tight bottle with brush
10 ml / 0.33 oz solvent "Smoother" in air-tight bottle with brush
10 ml / 0.33 oz solvent "Finisher" in air-tight bottle with brush
10 ml / 0.33 oz white oil in air-tight bottle with brush
5 g shredded TPE material in solvent-resistant small can
Solvent resistant small can for mixing the TPE paste in different consistency
Toothpicks for mixing the TPE paste
5 ml syringe for low viscosity TPE paste
Blunt 8 cm cannula, diameter 2 mm, for low viscosity TPE paste
20 ml syringe for medium and thick liquid TPE paste
10 cm infusion hose for medium and thick liquid TPE paste
TPE piece as test material
TPE paste and solvent "Preparer":
Please note!
The TPE paste is not a TPE adhesive!
The solvent "Preparer" is not a TPE adhesive!
Both are representing a 2-component application.
Solvent "Preparer" is used as
- thinner for the TPE paste to produce a thin-liquid and sprayable TPE paste
- primer for preparation by gently roughening and softening of the TPE material for subsequent application of the TPE paste
TPE paste and solvent "Preparer" are not including TPE structure dissolving (and destroying) aromatic hydrocarbons like xylene, toluene or styrene.
The solvent mixture I'm using makes TPE material fluent.
Application of the TPE paste:
Mix the TPE paste in the desired viscosity.
The paste comes with a medium viscosity inside the amber glass bottle.
- add solvent "Preparer" + TPE paste inside the mixing vessel = thin TPE paste
- add TPE paste + shredded TPE material inside the mixing vessel = thick TPE jelly
Prepare the area with the solvent "Preparer" to make the surface uniformly roughened and slightly softened.
Apply thin TPE paste with the small syringe and blunt canulla...
or medium TPE paste directly out of the amber glass bottle with large syringe and infusion tube...
or seal a large open air bubble in depth with thick TPE jelly and close it afterwards with medium TPE paste.
Smoothing:
That is the most important aspect of the whole repair.
Use the solvent "Smoother" to do this.
Just see how precise you are able to work with "Smoother".
Matting:
Use the solvent "Finisher" and give a "breath" on top of the repair...and the matt effect comes back.
See it on the left side within the pictures how "Finisher" does its work.
White oil:
It is expensive white oil (pure mineral oil) with a very low viscosity of 15mPas. (miliPascalseconds).
There is no thinner mineral oil.
We need it for refreshing and saturation of the repair.
Just one application with that white oil is bringing an unbelievable saturation.
Please download the full manual (PDF file with 24 pages) if you like to see the whole function of the TPE repair kit "comfort" and how to repair different kinds of injuries missing TPE material.
The manual also provides the necessary hazard and safety information for the used solvents.
Downloads:
English handbook:
http://en.dollstudio.org/sites/default/ ... omfort.pdf
Deutsches Handbuch:
http://en.dollstudio.org/sites/default/ ... omfort.pdf
Pricing:
(includes the necessary packaging and labelling for dangerous goods with limited quantities "LQ")
48,50 € / $ 52,50
The amount of TPE paste, solvent, shredded TPE material and the included TPE test piece are designed to actively operate with the TPE repair kit "comfort" to learn the behavior of TPE material so that subsequent repair of the actual TPE love doll can be successfully done.
The pricing includes also a permanent email assistance before and during your repair.
Shipping + tracking:
(according to the International Air Transport Association-Dangerous Goods Regulations "IATA-DGR")
7,50 € / $ 8,50
Please write me a PM if you like to order and / or if you have any kinds of questions about the TPE repair kit "comfort".
Indigo
Re: Indigo's Individual TPE Repair Kit - Updates
(AFAIK, canada is very pesky about accepting liquids/etc from overseas, but local transport is OK?)
Re: Indigo's Individual TPE Repair Kit - Updates
Bored, certified "plastic" surgeon. Serving the masses.
Dolls i have worked on. Real doll ,JM doll,teddybabes,Anime fabric doll,wm doll, d.s dolls, Diao shi, extravaganza air dolls, 1st pc, and candy8teen dolls.
Need work done? Feel free to send me a note.
- Booty Call Dolls
- VENDOR
- Posts: 23786
- Joined: Sat Apr 05, 2014 3:49 pm
- Contact:
Re: Indigo's Individual TPE Repair Kit - Updates
Jeff and Nyoko
- Booty Call Dolls
- VENDOR
- Posts: 23786
- Joined: Sat Apr 05, 2014 3:49 pm
- Contact:
Re: Indigo's Individual TPE Repair Kit - Updates
- Anung Un Rama
- Doll Visionary
- Posts: 14846
- Joined: Fri Oct 31, 2014 2:27 am
- Location: The Dollsmith..hanging out with the Un Rama band on the Central Coast Of Oz! Life is gigs and jams!
- Contact:
Re: Indigo's Individual TPE Repair Kit - Updates
I can see the logic of your technique as adding a filler to fill the wound site when the area is in an allready stressed/stretched position. This would mean there would not be the same stress point on the tpe repair site when the doll flesh is stressed and stretched again and would reduce potential for failure of the repair when stress loaded again. It is esential to get the filler mix spot on though as the wrong blend has potential to further disolve and crater a wound site too...so I generally a minimalistic and very gradual with these repairs.
I also like the smoothing and finishing processes too...well done !
And faboulous that there is a multiple step by step full kit and how to guide (very thorough..and again well down)...as TPE repairs have been the bogey man of many doll owners.
Thanks for sharing.
THE UN RAMA'S
Lilith Un Rama - RD She Devil Custom Bod 10 (DOLLMILF and TDF Doll Queen)
Natasha-RD Classic - Bod 6
Lexi-BT 3 (C) Star Bod 3 Gel butt & boob implants
Lorelei-SANHUI 165R cup my custom elf head 007
Emerald-R13 custom
Tammy-PIB IG -Bella Head
Ayla-WM dolls - 155cm DD cup model
Jessica Jade-PD - 163cm, Penelope fitness version .
Mazzy M-JY/AS Doll 166cm fitness model
Pearl-JY150cm Fantasy Fitness my design
BaBs-PD 158cm Mega Boobs doll
Jessie-TB Deluxe-Jessica Model
Danny-YL Dolls-128cm Kylie model
Gypsy Kate-WM 140cm D cup head #36
Dommy-SANHUI 65cm Mini silicone doll
Mini Dolls lots!
My designs: PD 160 cm FBB Motoko Kusinagi GITS, She Demon Agony & 150cm Fantasy fitness Pearl
- Booty Call Dolls
- VENDOR
- Posts: 23786
- Joined: Sat Apr 05, 2014 3:49 pm
- Contact:
Re: Indigo's Individual TPE Repair Kit - Updates
Jeff and the BCD Girls
- Attachments
-
- wound2.jpg (189.64 KiB) Viewed 11466 times
- Booty Call Dolls
- VENDOR
- Posts: 23786
- Joined: Sat Apr 05, 2014 3:49 pm
- Contact:
ReRe: Indigo's Individual TPE Repair Kit - Updates
Again, thank you for all you do for the doll community. The BCD family truly appreciates you.
BCD
- Attachments
-
- IMG_1638.JPG (37.39 KiB) Viewed 11457 times
- abracadabra
- Doll Advisor
- Posts: 892
- Joined: Sat Jun 11, 2016 5:56 am
- Location: anywhere within reason
- Contact:
Re: Indigo's Individual TPE Repair Kit - Updates
now if a repair is needed I will be ready.
"f#ck the G-ride, I want the machines that are making em."
- abracadabra
- Doll Advisor
- Posts: 892
- Joined: Sat Jun 11, 2016 5:56 am
- Location: anywhere within reason
- Contact:
Re: Indigo's Individual TPE Repair Kit - Updates
My kit it arrive today! I'm excited. Will post a review this evening
"f#ck the G-ride, I want the machines that are making em."
- Anung Un Rama
- Doll Visionary
- Posts: 14846
- Joined: Fri Oct 31, 2014 2:27 am
- Location: The Dollsmith..hanging out with the Un Rama band on the Central Coast Of Oz! Life is gigs and jams!
- Contact:
Re: Indigo's Individual TPE Repair Kit - Updates
Myself, I would go for a TPE Paste fill solution. Possible three layers with kneading required. This joint area I would consider as a stress area, more than a high stress load bearing area (unless the doll constantly is stored in the splitz position).Booty Call Dolls wrote:Is this an easy fix with comfort?
Jeff and the BCD Girls
After correct prep ensuring the repair site is clean, free of contaminent and dry, I would do the repair with the doll postured such that the defect site was 3/4s of the way fully open. I would then run tpe paste filler layers, keeping the doll in the same posture, with an gentle knead(pinching) of the wound back together in between layers to ensure full bond contact area is achieved and any air bubbles or pockets are squeezed out.
I would finish filling perhaps 0.5 MM proud of the top doll flesh surface. This gives some extra forgiveness material when smoothing the repair. Once smoothed then look at matting and oiling. The comfort kit appears to have everything that is needed and indeed some more widgets to make the job even easier for the less precise doll technician
The repair and doll must remain in the same position until the intial filling has bonded. 24 hours is generally ample, but I would wait longer for deeper and larger reapirs.
Once set, the doll can be placed back into legs closed postion, and any repair bulging can be blended and smoothed in. Avoid smoothing back to fully flush with the rest of the surface, otherwise the repair will be concave when legs open.
Now this technique, should generate sufficient TPE flexibility to ensure the repair has simmilar properties as shown in the test repair piece stretch test shown in the instruction guide.
Simply using TPE Glue, with the legs closed will not work here, because as a soon as the legs are opened, the rupture will re-open as their is insufficient bond strength in TPE glue for this type of application.
Happy to here other thoughts, but this is what I have discovered doing TPE rupture repairs.
Cheers Anung
THE UN RAMA'S
Lilith Un Rama - RD She Devil Custom Bod 10 (DOLLMILF and TDF Doll Queen)
Natasha-RD Classic - Bod 6
Lexi-BT 3 (C) Star Bod 3 Gel butt & boob implants
Lorelei-SANHUI 165R cup my custom elf head 007
Emerald-R13 custom
Tammy-PIB IG -Bella Head
Ayla-WM dolls - 155cm DD cup model
Jessica Jade-PD - 163cm, Penelope fitness version .
Mazzy M-JY/AS Doll 166cm fitness model
Pearl-JY150cm Fantasy Fitness my design
BaBs-PD 158cm Mega Boobs doll
Jessie-TB Deluxe-Jessica Model
Danny-YL Dolls-128cm Kylie model
Gypsy Kate-WM 140cm D cup head #36
Dommy-SANHUI 65cm Mini silicone doll
Mini Dolls lots!
My designs: PD 160 cm FBB Motoko Kusinagi GITS, She Demon Agony & 150cm Fantasy fitness Pearl
Re: Indigo's Individual TPE Repair Kit - Updates
The repair next to the vagina (picture from forum user itvman) can be repaired exactly in the way how forum member Anung Un Rama described it.
The repair at the knee is very simple.
@ Anung Un Rama:
Thank you very much for your assistance for the TPE repair kit "comfort".
Your describtion is perfect.
But I have to tell you the truth and what happens to me while people are asking me for the TPE repair kit.
1.) Too expensive:
Well, what shall I say ?
All the material is costing me 33 Euros with 19% VAT.
It takes me 3 hours to make the kit ready.
Washing, cutting and desinfection of the TPE material, shredding afterwards.
Mixing the TPE paste and filling the glass bottles with the solvent mixtures while wearing a complete overall, gloves and mask.
Printouts, cutting, labelling.
Cutting the sharp edge of the canulla and smoothen it afterwards, washing and desinfection.
And complete email support during the repair.
Yes, the kit is too expensive...not for the customer...it is too expensive for me.
Oh, and did I mention that it took me half a year to develop the kit and the solvent mixtures for it ?
And how about the costs for having a lab with waste air cabine ?
And how about the costs for recycling waste chemicals ?
2.) Too complicate:
"I'm not a chemist, I do not know how to...."
Well, what shall I say ?
I'm the chemist and I made everything ready. Just use it.
Prepare the damage, fill in the paste, smoothen and matting. Some oil afterwards.
Yes, that is complicate.
Old fashion pancakes are more complicated.
And why did I provide a manual with 24 pages explaining everything ?
Oh, yes, manuals are there for not reading it, I forgot.
The correct reason is that the doll owners are in panic.
That's why they are talking about "injuries".
There is no blood and no guts are comming out.
It is a simple cut inside of synthetics that needs to be repaired.
3.) Shipping takes too long:
"2 weeks, what, that is too long."
Ok, if you are not able to be patient, then you are not patient enough to do the repair.
2 weeks later...new PM...more worst pictures of a self made repair...
"Now I need the repair kit...ASAP"
"Sorry, but that cannot be repaired anymore"
> Insults against me.
At the moment I'm asking myself why I'm doing such a stress to myself.
These problems are only inside TDF.
There are no problems with customers in Europe and in Germany.
- Anung Un Rama
- Doll Visionary
- Posts: 14846
- Joined: Fri Oct 31, 2014 2:27 am
- Location: The Dollsmith..hanging out with the Un Rama band on the Central Coast Of Oz! Life is gigs and jams!
- Contact:
Re: Indigo's Individual TPE Repair Kit - Updates
This is the only holistic complete repair for TPE products that I have found ATM, and when my stockpile of repair compounds is exhausted, I will have no problem getting one of these kits to add to the dollsmith's repair and restoration tool kit (or doll doctors medical bag as samara would say ).
Keep up the good work as your product offers even the less talented technician with an effective repair option, that saves that hard decision regarding doll retirement.
Thanks again, Anung
THE UN RAMA'S
Lilith Un Rama - RD She Devil Custom Bod 10 (DOLLMILF and TDF Doll Queen)
Natasha-RD Classic - Bod 6
Lexi-BT 3 (C) Star Bod 3 Gel butt & boob implants
Lorelei-SANHUI 165R cup my custom elf head 007
Emerald-R13 custom
Tammy-PIB IG -Bella Head
Ayla-WM dolls - 155cm DD cup model
Jessica Jade-PD - 163cm, Penelope fitness version .
Mazzy M-JY/AS Doll 166cm fitness model
Pearl-JY150cm Fantasy Fitness my design
BaBs-PD 158cm Mega Boobs doll
Jessie-TB Deluxe-Jessica Model
Danny-YL Dolls-128cm Kylie model
Gypsy Kate-WM 140cm D cup head #36
Dommy-SANHUI 65cm Mini silicone doll
Mini Dolls lots!
My designs: PD 160 cm FBB Motoko Kusinagi GITS, She Demon Agony & 150cm Fantasy fitness Pearl
- life-is-plastic
- Doll Mentor
- Posts: 1251
- Joined: Sun Jul 31, 2011 4:11 pm
- Contact:
Re: Indigo's Individual TPE Repair Kit - Updates
*edit: looks like it works on WM TPE ... how to order? Couldn't find a way to put it in shopingbasket on website.