dollstudio.org

Magnetic M16 Connector - Manual and Usage Instructions

Dollstudio focuses on life-like dolls made of silicone and TPE, with products spanning from life-sized love dolls and manikins over miniature companions to 1/6 scale miniatures. Based in Europe, Dollstudio is an authorized vendor for respected manufacturers like Doll Sweet, Ruby13, Maidlee Doll, Dream Doll Creation, OR Doll, WM Dolls, YL Doll, JM Doll, Sanhui, Hitdoll, Onedoll, and Lovely Doll. By default, we're shipping from Germany with all customs and taxes cleared.
Website: dollstudio.org & dsdolleurope.com
User avatar
Dollstudio
VENDOR
VENDOR
Posts: 6488
Joined: Thu Nov 06, 2014 6:21 pm
Location: Berlin
Contact:

Magnetic M16 Connector - Manual and Usage Instructions

Post by Dollstudio »

Hi,

here is a first draft of the the Manual and Usage Instructions for the Magnetic M16 Connector by Indigo Individual. This time, the translation has been done by Indigo20 himself. So many thanks for the development work, for thoroughly testing the product, and providing in-depth useage instructions with many tips & tricks that make handling love dolls easier!

As always, we appreciate any suggestions for better wording and terminological consistency. Indigo's manual is also available in German; we'll post the German and English PDF versions with pictures later. It's 11 pages in A4 each.

First, what is this Magnetic M16 Connector and why would you want to use it? It can be used to connect heads to the bodies of TPE and silicone love dolls without having to screw a bolt into head and body each time.

The Magnetic M16 Connector is compatible with all dolls which use a M16 neck thread; among otheres, this includes
  • Jellynew (all models)
  • Maiden Doll (some models)
  • OR Doll (all models)
  • WM Doll (some models)
  • WM Dolls (all models)
  • YL Doll (all models)
  • Z-Onedoll (all models)

Outline

I. General information about the magnetic M16 head connector

II. Scope of Delivery for the magnetic M16 head connector
  • optional available top part
  • optional available lower part
  • Specifications and metrics
III. Self required material

IV. Mounting and adjustment of the magnetic M16 head connector
  • Put on and remove of the doll head
  • Mounting for first adjustment
  • Solid screw connection with teflon tape
  • Slight nodding
  • Enhancing the braking effect of the doll head with felt washer
V. Service and cleaning

Permalink: http://en.dollstudio.org/node/2679
Dollstudio EU - Customers from EU countries, please visit eu.dollstudio.org (in English)
Dollstudio US - Customers from the U.S., Canada and outside the EU, please visit us.dollstudio.org (in English)
Dollstudio DE - Kunden aus Deutschland sind willkommen auf de.dollstudio.org (in Deutsch)

Get news & updates on Twitter - Dollstudio @Twitter

DS Doll Europe (EU) - Customers from EU countries, please visit en.dsdolleurope.com (in English)

Dollstudio Dollworks Adapter System - Create your hybrid doll!

User avatar
Dollstudio
VENDOR
VENDOR
Posts: 6488
Joined: Thu Nov 06, 2014 6:21 pm
Location: Berlin
Contact:

Usage regulations

Post by Dollstudio »

Usage regulations for the Magnetic M16 Connecotr by Indigo Individual.

The magnetic M16 head connector is only designed to replace the original M16 head bolt from love dolls comming with a M16 head bolt.

Another usage or misappropriation is not designated.

It is strongly advised not to modify or to manipulate the magnetic M16 head connector.


Permalink: http://en.dollstudio.org/node/2697
Dollstudio EU - Customers from EU countries, please visit eu.dollstudio.org (in English)
Dollstudio US - Customers from the U.S., Canada and outside the EU, please visit us.dollstudio.org (in English)
Dollstudio DE - Kunden aus Deutschland sind willkommen auf de.dollstudio.org (in Deutsch)

Get news & updates on Twitter - Dollstudio @Twitter

DS Doll Europe (EU) - Customers from EU countries, please visit en.dsdolleurope.com (in English)

Dollstudio Dollworks Adapter System - Create your hybrid doll!

User avatar
Dollstudio
VENDOR
VENDOR
Posts: 6488
Joined: Thu Nov 06, 2014 6:21 pm
Location: Berlin
Contact:

Safety notes

Post by Dollstudio »

Safety notes for the for the neodymium magnet of the magnetic M16 head connector by Indigo Individual.

Magnetic connector not screwed into the love doll

Magnets are not toys! Make sure that children don't play with magnets. Magnets could affect the functioning of pacemakers and implanted heart defibrillators. If you wear these devices keep sufficient distance to magnets. Magnets produce a far-reaching, strong magnetic field. They could damage TVs and laptops, computer hard drives, credit and ATM cards, data storage media, mechanical watches, hearing aids, loud speakers, vehicle keys, digital cameras, cell phones and smart phones.

Magnetic connector screwed into the love doll

Make sure that no moisture affects the magnet during washing the love doll. Moisture can cause oxidation and corrosion of the magnet and the connector. Make sure that no powder gets into the lower part of the connector during powdering the neck of the love doll. For preventing it, place a rolled paper towel into the lower part of the connector.


Permalink: http://en.dollstudio.org/node/2698
Dollstudio EU - Customers from EU countries, please visit eu.dollstudio.org (in English)
Dollstudio US - Customers from the U.S., Canada and outside the EU, please visit us.dollstudio.org (in English)
Dollstudio DE - Kunden aus Deutschland sind willkommen auf de.dollstudio.org (in Deutsch)

Get news & updates on Twitter - Dollstudio @Twitter

DS Doll Europe (EU) - Customers from EU countries, please visit en.dsdolleurope.com (in English)

Dollstudio Dollworks Adapter System - Create your hybrid doll!

User avatar
Dollstudio
VENDOR
VENDOR
Posts: 6488
Joined: Thu Nov 06, 2014 6:21 pm
Location: Berlin
Contact:

Magnetic shielding

Post by Dollstudio »

Magnetic shielding of the magnetic M16 Connector by Indigo Individual.

The material of the neck from the love doll produces a strong magnetic shielding.

Necklaces, jewelry and ear rings are therewith not affected by the magnet.


Permalink: http://en.dollstudio.org/node/2699
Dollstudio EU - Customers from EU countries, please visit eu.dollstudio.org (in English)
Dollstudio US - Customers from the U.S., Canada and outside the EU, please visit us.dollstudio.org (in English)
Dollstudio DE - Kunden aus Deutschland sind willkommen auf de.dollstudio.org (in Deutsch)

Get news & updates on Twitter - Dollstudio @Twitter

DS Doll Europe (EU) - Customers from EU countries, please visit en.dsdolleurope.com (in English)

Dollstudio Dollworks Adapter System - Create your hybrid doll!

User avatar
Dollstudio
VENDOR
VENDOR
Posts: 6488
Joined: Thu Nov 06, 2014 6:21 pm
Location: Berlin
Contact:

I. General information

Post by Dollstudio »

I. General information about the Magnetic M16 head connector by Indigo Individual.

The magnetic M16 head connector is a comfort product and replaces the original M16 connection bolt.

The usage of the magnetic M16 head connector provides you the long missed flexibility and easy handling of the whole love doll.

Because of the easy way you put on and remove the doll head with wig the following comfort effects are now permanent available:
  • Dressing and undressing of the love doll becomes easier and enormous shorten in time, because you are able to remove and put on the doll head with wig very easy.
  • Removing the head with wig makes the love doll about two kilos lighter and 18 cm shorter. Carrying the love doll through doors and across stairs becomes much easier.
  • Without head and wig it is also easier to prepare the positioning of the love doll for photo shooting or for positions having sex. Put on the head with wig after you have done the positioning and place the hair along the love doll.
  • It is an advantage to lay down the love doll without head and wig on her back. Therewith the hairs of the wig are not under the love doll. Put on the head with wig after the love doll is layed down and place the hair along the love doll.
  • A quick storage of the love doll inside a coffin becomes enormous shorten in time just by removing the head with wig. Because of the weight and lenght reduction of the doll the whole storage process becomes more quick and safe in addition.
With optionally available top part of the connector:
  • Swap between different heads with wigs within seconds. If you have a doll head with open eyes and a doll head with closed eyes you are able to change the charisma and impression of the love doll for your desired situation (e.g. day and night).
With optionally available lower part of the connector:
  • Place and store the doll head on a DIY head (work) station.

Permalink: http://en.dollstudio.org/node/2700
Dollstudio EU - Customers from EU countries, please visit eu.dollstudio.org (in English)
Dollstudio US - Customers from the U.S., Canada and outside the EU, please visit us.dollstudio.org (in English)
Dollstudio DE - Kunden aus Deutschland sind willkommen auf de.dollstudio.org (in Deutsch)

Get news & updates on Twitter - Dollstudio @Twitter

DS Doll Europe (EU) - Customers from EU countries, please visit en.dsdolleurope.com (in English)

Dollstudio Dollworks Adapter System - Create your hybrid doll!

User avatar
Dollstudio
VENDOR
VENDOR
Posts: 6488
Joined: Thu Nov 06, 2014 6:21 pm
Location: Berlin
Contact:

II. Scope of delivery

Post by Dollstudio »

II. Scope of delivery of the Magnetic M16 head connector by Indigo Individual.
Magnetic M16 Connector - Image courtesy of Indigo Individual
Magnetic M16 Connector - Image courtesy of Indigo Individual
ii-m16-mag-conn-01.jpg (67 KiB) Viewed 6106 times
  • Complete magnetic M16 head connector
  • Roll of teflon tape (compensation of thread tolerance from the original doll production)
  • 2 additional O-rings as spare parts (light braking effect of the head)
  • 2 additional sticky felt washers (enhanced braking effect for the head)
Optionally available top part for more doll heads:
  • with O-ring (light braking effect of the head)
  • additional sticky felt washer (enhanced braking effect for the head)
Magnetic M16 Connector - Image courtesy of Indigo Individual
Magnetic M16 Connector - Image courtesy of Indigo Individual
ii-m16-mag-conn-02.jpg (61.12 KiB) Viewed 6106 times
Optionally available lower part for DIY head (work) station:
  • with included neodymium magnet
Magnetic M16 Connector - Image courtesy of Indigo Individual
Magnetic M16 Connector - Image courtesy of Indigo Individual
ii-m16-mag-conn-03.jpg (82.22 KiB) Viewed 6106 times

Specifications and metrics.

The magnetic M16 head connector is fully handcrafted, made of steel with quality class 8.8 and is additionally galvanized.

The included neodymium magnet is holding about 5kg.

On both connector parts is a blank surface (red arrows) for the open-ended wrench with 14 mm (= 9/16 inches).
Magnetic M16 Connector - Image courtesy of Indigo Individual
Magnetic M16 Connector - Image courtesy of Indigo Individual
ii-m16-mag-conn-04.jpg (124.12 KiB) Viewed 6106 times
Magnetic M16 Connector - Image courtesy of Indigo Individual
Magnetic M16 Connector - Image courtesy of Indigo Individual
ii-m16-mag-conn-05.jpg (61.6 KiB) Viewed 6106 times
Magnetic M16 Connector - Image courtesy of Indigo Individual
Magnetic M16 Connector - Image courtesy of Indigo Individual
ii-m16-mag-conn-06.jpg (45.52 KiB) Viewed 6106 times
Magnetic M16 Connector - Image courtesy of Indigo Individual
Magnetic M16 Connector - Image courtesy of Indigo Individual
ii-m16-mag-conn-07.jpg (83.47 KiB) Viewed 6106 times

Permalink: http://en.dollstudio.org/node/2701
Dollstudio EU - Customers from EU countries, please visit eu.dollstudio.org (in English)
Dollstudio US - Customers from the U.S., Canada and outside the EU, please visit us.dollstudio.org (in English)
Dollstudio DE - Kunden aus Deutschland sind willkommen auf de.dollstudio.org (in Deutsch)

Get news & updates on Twitter - Dollstudio @Twitter

DS Doll Europe (EU) - Customers from EU countries, please visit en.dsdolleurope.com (in English)

Dollstudio Dollworks Adapter System - Create your hybrid doll!

User avatar
Dollstudio
VENDOR
VENDOR
Posts: 6488
Joined: Thu Nov 06, 2014 6:21 pm
Location: Berlin
Contact:

III. Self required material

Post by Dollstudio »

III. Self required material for installation and usage of the Magnetic M16 Connector by Indigo Individual.

Use an open-ended wrench with 14 mm (= 9/16 inches)…
Magnetic M16 Connector - Image courtesy of Indigo Individual
Magnetic M16 Connector - Image courtesy of Indigo Individual
ii-m16-mag-conn-08.jpg (23.46 KiB) Viewed 6106 times
… or a wrench with adjustable width:
Magnetic M16 Connector - Image courtesy of Indigo Individual
Magnetic M16 Connector - Image courtesy of Indigo Individual
ii-m16-mag-conn-09.jpg (81.84 KiB) Viewed 6106 times
Therewith you are screwing in both parts of the connector:
Magnetic M16 Connector - Image courtesy of Indigo Individual
Magnetic M16 Connector - Image courtesy of Indigo Individual
ii-m16-mag-conn-10.jpg (76.14 KiB) Viewed 6106 times
Magnetic M16 Connector - Image courtesy of Indigo Individual
Magnetic M16 Connector - Image courtesy of Indigo Individual
ii-m16-mag-conn-11.jpg (62.91 KiB) Viewed 6106 times

Permalink: http://en.dollstudio.org/node/2702
Dollstudio EU - Customers from EU countries, please visit eu.dollstudio.org (in English)
Dollstudio US - Customers from the U.S., Canada and outside the EU, please visit us.dollstudio.org (in English)
Dollstudio DE - Kunden aus Deutschland sind willkommen auf de.dollstudio.org (in Deutsch)

Get news & updates on Twitter - Dollstudio @Twitter

DS Doll Europe (EU) - Customers from EU countries, please visit en.dsdolleurope.com (in English)

Dollstudio Dollworks Adapter System - Create your hybrid doll!

User avatar
Dollstudio
VENDOR
VENDOR
Posts: 6488
Joined: Thu Nov 06, 2014 6:21 pm
Location: Berlin
Contact:

IV. Mounting and adjustment

Post by Dollstudio »

IV. Mounting and adjustment of the Magnetic M16 head connector by Indigo Individual.

Before using the magnetic M16 head connector please make sure that
  • the threads in the neck and head are free of dust and dirt,
  • the top of the neck is cleaned and powdered without powder inside the thread,
  • the bottom of the head is cleaned and
  • that the measurements of the connector fit with the threads of neck and head of your love doll.
Put on and remove of the doll head.

Do never hold the doll head with both hands left and right at the ears! The power of the magnet is really strong. The ears are very filigree and could be damaged. Additional ear rings could be teared out.
Magnetic M16 Connector - Image courtesy of Indigo Individual
Magnetic M16 Connector - Image courtesy of Indigo Individual
ii-m16-mag-conn-12.jpg (83.01 KiB) Viewed 6103 times
Instead, place one hand beneath the chin and the other hand on the back of the head with wig. Lift the head slowly against the power of the magnet. Inverse the procedure for attaching the head with wig.
Magnetic M16 Connector - Image courtesy of Indigo Individual
Magnetic M16 Connector - Image courtesy of Indigo Individual
ii-m16-mag-conn-13.jpg (61.27 KiB) Viewed 6103 times

Mounting for first adjustment.

Do not use the provided teflon tape for this step.

At first you have to make sure if it is possible to mount both connector parts because of the possible thread tolerance of the doll production.

Screw in the lower part of the connector in the thread of the neck until the blank surface of the lower part of the connector is concise with the top of the thread.
Magnetic M16 Connector - Image courtesy of Indigo Individual
Magnetic M16 Connector - Image courtesy of Indigo Individual
ii-m16-mag-conn-14.jpg (128.97 KiB) Viewed 6103 times
Magnetic M16 Connector - Image courtesy of Indigo Individual
Magnetic M16 Connector - Image courtesy of Indigo Individual
ii-m16-mag-conn-15.jpg (77.39 KiB) Viewed 6103 times
Remove the O-ring of the top part of the connector.

Screw in the top part of the connector in the thread of the head until the blank surface of the top part of the connector is concise with the top of the thread.

Attach the O-ring afterwards.
Magnetic M16 Connector - Image courtesy of Indigo Individual
Magnetic M16 Connector - Image courtesy of Indigo Individual
ii-m16-mag-conn-16.jpg (88.98 KiB) Viewed 6103 times
Magnetic M16 Connector - Image courtesy of Indigo Individual
Magnetic M16 Connector - Image courtesy of Indigo Individual
ii-m16-mag-conn-17.jpg (51.25 KiB) Viewed 6103 times
There is no connection to the magnet in the lower part of the connector if the top part of the connector is screwed in too deep.

Put on the doll head.

The bolt of the top part of the connector fits into the drilling of the lower part of the connector. Now you can feel the contact with the magnet. Try to lift the head a bit against the power of the magnet.

If there is no contact with the magnet, adjust the top part of the connector inside the head again. Because of the possible tolerance of the threads from the doll production, it is possible that the head can wiggle. That will be fixed with the teflon tape later.

Check that the head fits exactly with the material from the neck. Turn the head left and right and check the smooth movement of the head.
Magnetic M16 Connector - Image courtesy of Indigo Individual
Magnetic M16 Connector - Image courtesy of Indigo Individual
ii-m16-mag-conn-18.jpg (57.98 KiB) Viewed 6103 times
In case that there was an adjustment of the top part necessary to make everything fit, keep the position of the top part in mind. Remove both parts from the connector.

We are now going to prepare both connector parts with teflon tape.


Solid screw connection with teflon tape.

Wrap both parts of the connector with teflon tape. It is a right-hand thread. Wrap in direction with the thread.
Magnetic M16 Connector - Image courtesy of Indigo Individual
Magnetic M16 Connector - Image courtesy of Indigo Individual
ii-m16-mag-conn-19.jpg (57.16 KiB) Viewed 6103 times
Magnetic M16 Connector - Image courtesy of Indigo Individual
Magnetic M16 Connector - Image courtesy of Indigo Individual
ii-m16-mag-conn-20.jpg (71.04 KiB) Viewed 6103 times
You have to wrap only 3-4 times if both connector parts were tight during the first adjustment.

Wrap around 6-7 times if there was a tolerance of the thread.

Now screw in the lower part of the connector.

Screw in the top part of the connector as it was with the first adjustment.

Do now the same check as made with the first adjustment.

The magnet has contact, the head fits and can be turned very smooth.

The powdered top of the neck provides the smooth movement of the head and the O-ring between both connector parts provides a light braking effect.


Slight nodding.

It is normal that there is a light nodding. You cannot prevent this. We have the construction concept "bolt within a drilling". There must be a small tolerance.


Enhancing the braking effect of the doll head with felt washer.

Place the felt washer with the sticky side at the bottom of the doll head. From now the felt washer is rubbing on the top of the neck and therewith you are receiving an enhanced braking effect while turning the doll head.
Magnetic M16 Connector - Image courtesy of Indigo Individual
Magnetic M16 Connector - Image courtesy of Indigo Individual
ii-m16-mag-conn-21.jpg (53.23 KiB) Viewed 6103 times
If you like to enhance the braking effect in addition, remove some powder from the top of the neck. Therewith the rubbing effect becomes stronger. You can use this effect for photo shootings.

But for the normal usage of the doll with a lot of movement of the dolls head, please keep powder on the top of the neck.


Permalink: http://en.dollstudio.org/node/2703
Dollstudio EU - Customers from EU countries, please visit eu.dollstudio.org (in English)
Dollstudio US - Customers from the U.S., Canada and outside the EU, please visit us.dollstudio.org (in English)
Dollstudio DE - Kunden aus Deutschland sind willkommen auf de.dollstudio.org (in Deutsch)

Get news & updates on Twitter - Dollstudio @Twitter

DS Doll Europe (EU) - Customers from EU countries, please visit en.dsdolleurope.com (in English)

Dollstudio Dollworks Adapter System - Create your hybrid doll!

User avatar
Dollstudio
VENDOR
VENDOR
Posts: 6488
Joined: Thu Nov 06, 2014 6:21 pm
Location: Berlin
Contact:

V. Service and cleaning

Post by Dollstudio »

V. Service and cleaning of the Magnetic M16 Connector by Indigo Individual.

As you know you have to cover the dolls head or the dolls neck with a plastic bag while washing the love doll to prevent, that water gets inside the love doll.

The love doll is not watertight on her neck. And in addition you have to prevent that moisture can affect the magnet.

Please use a rolled paper towel and stick it in the lower part of the connector while washing and / or powdering the love doll. That prevents that powder can reduce the contact of the magnet.
Magnetic M16 Connector - Image courtesy of Indigo Individual
Magnetic M16 Connector - Image courtesy of Indigo Individual
ii-m16-mag-conn-22.jpg (82.25 KiB) Viewed 6089 times
For cleaning the top and lower part of the magnetic M16 head connector please use a dry paper towel. Do only a dry cleaning. Please do never use oil!

Dust and dirt inside the drilling of the lower part of the connector can be removed with a small brush and a vacuum cleaner. Screw out the lower part of the connector if intense cleaning is necessary. Use a pencil and remove the neodymium magnet.
Magnetic M16 Connector - Image courtesy of Indigo Individual
Magnetic M16 Connector - Image courtesy of Indigo Individual
ii-m16-mag-conn-23.jpg (53.79 KiB) Viewed 6089 times

Permalink: http://en.dollstudio.org/node/2704
Dollstudio EU - Customers from EU countries, please visit eu.dollstudio.org (in English)
Dollstudio US - Customers from the U.S., Canada and outside the EU, please visit us.dollstudio.org (in English)
Dollstudio DE - Kunden aus Deutschland sind willkommen auf de.dollstudio.org (in Deutsch)

Get news & updates on Twitter - Dollstudio @Twitter

DS Doll Europe (EU) - Customers from EU countries, please visit en.dsdolleurope.com (in English)

Dollstudio Dollworks Adapter System - Create your hybrid doll!

User avatar
Dollstudio
VENDOR
VENDOR
Posts: 6488
Joined: Thu Nov 06, 2014 6:21 pm
Location: Berlin
Contact:

Download

Post by Dollstudio »

Download the full manual for the Magnetic M16 Connector by Indigo Individual.

Download PDF manual in German (ca. 1 MB):
handbuch-magnetischer-m16-kopf-verbinder.pdf
(1.03 MiB) Downloaded 372 times
Download PDF manual in English (ca. 1 MB)
handbook-magnetic-m16-head-connector.pdf
(1.03 MiB) Downloaded 235 times

Permalink: http://en.dollstudio.org/node/2705
Dollstudio EU - Customers from EU countries, please visit eu.dollstudio.org (in English)
Dollstudio US - Customers from the U.S., Canada and outside the EU, please visit us.dollstudio.org (in English)
Dollstudio DE - Kunden aus Deutschland sind willkommen auf de.dollstudio.org (in Deutsch)

Get news & updates on Twitter - Dollstudio @Twitter

DS Doll Europe (EU) - Customers from EU countries, please visit en.dsdolleurope.com (in English)

Dollstudio Dollworks Adapter System - Create your hybrid doll!

User avatar
tman2016
Senior Member
Senior Member
Posts: 362
Joined: Mon Oct 03, 2016 11:19 am
Contact:

Re: Magnetic M16 Connector - Manual and Usage Instructions

Post by tman2016 »

This is a awesome, great instructions! Already ordered my set, one full set and 2 additional head adapters from Booty Call Dolls (Jeff)! Can't wait for them to arrive!
YL155 Custom D, BB (with heads 36, 46, 88) - Mila, Jessica, and Ivana have arrived!

See the welcome topic for my dolls:http://dollforum.com/forum/viewtopic.php?f=87&t=77559
Sexy Pictures: http://dollforum.com/forum/viewtopic.php?f=113&t=93973
More Sexy Pictures: http://dollforum.com/forum/viewtopic.php?f=11&t=93872

User avatar
Anung Un Rama
Doll Visionary
Doll Visionary
Posts: 14846
Joined: Fri Oct 31, 2014 2:27 am
Location: The Dollsmith..hanging out with the Un Rama band on the Central Coast Of Oz! Life is gigs and jams!
Contact:

Re: Magnetic M16 Connector - Manual and Usage Instructions

Post by Anung Un Rama »

What are realy good product and how to thread...well done all....even Lilith could fit these ....I shall look into getting some me thinks!
Image



THE UN RAMA'S

Lilith Un Rama - RD She Devil Custom Bod 10 (DOLLMILF and TDF Doll Queen)
Natasha-RD Classic - Bod 6
Lexi-BT 3 (C) Star Bod 3 Gel butt & boob implants
Lorelei-SANHUI 165R cup my custom elf head 007
Emerald-R13 custom
Tammy-PIB IG -Bella Head
Ayla-WM dolls - 155cm DD cup model
Jessica Jade-PD - 163cm, Penelope fitness version .
Mazzy M-JY/AS Doll 166cm fitness model
Pearl-JY150cm Fantasy Fitness my design
BaBs-PD 158cm Mega Boobs doll
Jessie-TB Deluxe-Jessica Model
Danny-YL Dolls-128cm Kylie model
Gypsy Kate-WM 140cm D cup head #36
Dommy-SANHUI 65cm Mini silicone doll
Mini Dolls lots!
My designs: PD 160 cm FBB Motoko Kusinagi GITS, She Demon Agony & 150cm Fantasy fitness Pearl

User avatar
Xephyr
Doll Patriarch
Doll Patriarch
Posts: 3564
Joined: Sun Apr 13, 2014 12:44 am
Contact:

Re: Magnetic M16 Connector - Manual and Usage Instructions

Post by Xephyr »

Can you order a doll with this connection type pre-configured? I'm a tech savvy, but by no means mechanically inclined. I fear I will screw this all up.

User avatar
Dollstudio
VENDOR
VENDOR
Posts: 6488
Joined: Thu Nov 06, 2014 6:21 pm
Location: Berlin
Contact:

Re: Magnetic M16 Connector - Manual and Usage Instructions

Post by Dollstudio »

Xephyr wrote:Can you order a doll with this connection type pre-configured? I'm a tech savvy, but by no means mechanically inclined. I fear I will screw this all up.
I guess everybody can use the magnetic connector who managed to get the original (threaded) connector working. It get's only a bit complicated if you don't have tools like a wrench, or if your doll's neck thread is corroded (like on my Z-Onedoll).

We can pre-install the connector on all dolls that go through our Berlin office (all EU customers), or that run through a PQC in Chongqing at X/S.

You can check with Jeff from BCD if he offers controlled shipping as well. If he does, he could pre-install the connector as well.

Sandro
Dollstudio EU - Customers from EU countries, please visit eu.dollstudio.org (in English)
Dollstudio US - Customers from the U.S., Canada and outside the EU, please visit us.dollstudio.org (in English)
Dollstudio DE - Kunden aus Deutschland sind willkommen auf de.dollstudio.org (in Deutsch)

Get news & updates on Twitter - Dollstudio @Twitter

DS Doll Europe (EU) - Customers from EU countries, please visit en.dsdolleurope.com (in English)

Dollstudio Dollworks Adapter System - Create your hybrid doll!

User avatar
Xephyr
Doll Patriarch
Doll Patriarch
Posts: 3564
Joined: Sun Apr 13, 2014 12:44 am
Contact:

Re: Magnetic M16 Connector - Manual and Usage Instructions

Post by Xephyr »

Dollstudio wrote:
Xephyr wrote:Can you order a doll with this connection type pre-configured? I'm a tech savvy, but by no means mechanically inclined. I fear I will screw this all up.
I guess everybody can use the magnetic connector who managed to get the original (threaded) connector working. It get's only a bit complicated if you don't have tools like a wrench, or if your doll's neck thread is corroded (like on my Z-Onedoll).

We can pre-install the connector on all dolls that go through our Berlin office (all EU customers), or that run through a PQC in Chongqing at X/S.

You can check with Jeff from BCD if he offers controlled shipping as well. If he does, he could pre-install the connector as well.

Sandro
Totally Awesome!!! :glou:

Post Reply

INFORMATIONS