My 170M Cup review and pics
Re: My 170M Cup review and pics
Months ago when I saw the first promotion pictures of this full size dolls I already wrote they will tear very easy because of massive design failure.
Just take a closer look, I'm design engineer for molded plastic parts and sometimes I'm really shocked even when I see promotion pictures...
Some manufacturers are like lemmings copying the same mistakes from each other...
There are people which keep on selling this crap even if they know this.
Re: My 170M Cup review and pics
I bought it from one of the vendors listed in this forum.
Where are you seeing flaws?
Re: My 170M Cup review and pics
I don't know where you got the doll from, but it's not really the problem of one vendor or one specific manufacturer.bobhenry wrote:No I didnt take a whole lot of pictures.
I bought it from one of the vendors listed in this forum.
Where are you seeing flaws?
So if you don't have pictures I don't want to discuss this or speculate here.
I know indigo knows about many of these problems an will tell you the truth.
Don't make the same mistake twice and if you do, please review properly with pictures etc. from the beginning
Your doll is not lost, if you got the right repair and safety equipment it's easy to repair it (if the material isn't as bad as you fear) but it may take one or two days time.
Re: My 170M Cup review and pics
The vagina was like this. after one sex session or two it teared all around to the size of my dick.
the anus teared towards the butt crack.
these dolls are made for chinese people with micro penises (no offense). there is your flaw.
What do you mean not make same mistake twice? Like buying another one from the same vendor?
- Boulderjase
- Contributing Poster
- Posts: 46
- Joined: Tue Dec 20, 2011 9:59 am
- Contact:
Re: My 170M Cup review and pics
What is the massive design failure? Really want to know more specifics on this.Barbydoll wrote:Did you take pictures of your doll's private parts when you got it and if so would you share them? Are you sure you didn't get a fake?
Months ago when I saw the first promotion pictures of this full size dolls I already wrote they will tear very easy because of massive design failure.
Just take a closer look, I'm design engineer for molded plastic parts and sometimes I'm really shocked even when I see promotion pictures...
Some manufacturers are like lemmings copying the same mistakes from each other...
There are people which keep on selling this crap even if they know this.
- MoviePilot
- Doll Advisor
- Posts: 598
- Joined: Sat Aug 13, 2016 8:37 pm
- Contact:
Re: My 170M Cup review and pics
Boulderjase wrote:What is the massive design failure? Really want to know more specifics on this.Barbydoll wrote:Did you take pictures of your doll's private parts when you got it and if so would you share them? Are you sure you didn't get a fake?
Months ago when I saw the first promotion pictures of this full size dolls I already wrote they will tear very easy because of massive design failure.
Just take a closer look, I'm design engineer for molded plastic parts and sometimes I'm really shocked even when I see promotion pictures...
Some manufacturers are like lemmings copying the same mistakes from each other...
There are people which keep on selling this crap even if they know this.
Like bobhenry already tried to state with 'micro penises", currently the dolls are designed to be a "disposable product" for western guys. Especially an anal entry of 5mm in diameter may work for most of the Chinese designers but it's definitely too less if you're equipped a little heavier.
But luckily it seems that they start to wake up, at least looking at the anal entry design of Z-onedoll
@bobhenry: I'm really sorry to hear your situation, I also assume that the TPE of that doll is kinda weird. Last time, I quite "painted" with Preparer on mine - no reaction like you had with yours.
Re: My 170M Cup review and pics
Re: My 170M Cup review and pics
Yeah I think my doll is defective or something. When I apply yhe preparer and paste I get a nuclear reaction.MoviePilot wrote:Boulderjase wrote:What is the massive design failure? Really want to know more specifics on this.Barbydoll wrote:Did you take pictures of your doll's private parts when you got it and if so would you share them? Are you sure you didn't get a fake?
Months ago when I saw the first promotion pictures of this full size dolls I already wrote they will tear very easy because of massive design failure.
Just take a closer look, I'm design engineer for molded plastic parts and sometimes I'm really shocked even when I see promotion pictures...
Some manufacturers are like lemmings copying the same mistakes from each other...
There are people which keep on selling this crap even if they know this.
Like bobhenry already tried to state with 'micro penises", currently the dolls are designed to be a "disposable product" for western guys. Especially an anal entry of 5mm in diameter may work for most of the Chinese designers but it's definitely too less if you're equipped a little heavier.
But luckily it seems that they start to wake up, at least looking at the anal entry design of Z-onedoll
@bobhenry: I'm really sorry to hear your situation, I also assume that the TPE of that doll is kinda weird. Last time, I quite "painted" with Preparer on mine - no reaction like you had with yours.
Ive been checkig these z one dolls this morning. Looking fine. And i have received a very nice offer from ordoll yesterday so Im kinda not sure what to do. Honestly Id rather have my 170 fixed. I like that she is tall.
- tattooed dolls
- Doll Advisor
- Posts: 643
- Joined: Thu Jul 09, 2015 2:03 am
- Contact:
Re: My 170M Cup review and pics
So sorry man, let's hope for the best here.
- MoviePilot
- Doll Advisor
- Posts: 598
- Joined: Sat Aug 13, 2016 8:37 pm
- Contact:
Re: My 170M Cup review and pics
Yeah, check them out. My next doll definitely will be a Z-onedoll.bobhenry wrote:Yeah I think my doll is defective or something. When I apply yhe preparer and paste I get a nuclear reaction.MoviePilot wrote:Boulderjase wrote:What is the massive design failure? Really want to know more specifics on this.Barbydoll wrote:Did you take pictures of your doll's private parts when you got it and if so would you share them? Are you sure you didn't get a fake?
Months ago when I saw the first promotion pictures of this full size dolls I already wrote they will tear very easy because of massive design failure.
Just take a closer look, I'm design engineer for molded plastic parts and sometimes I'm really shocked even when I see promotion pictures...
Some manufacturers are like lemmings copying the same mistakes from each other...
There are people which keep on selling this crap even if they know this.
Like bobhenry already tried to state with 'micro penises", currently the dolls are designed to be a "disposable product" for western guys. Especially an anal entry of 5mm in diameter may work for most of the Chinese designers but it's definitely too less if you're equipped a little heavier.
But luckily it seems that they start to wake up, at least looking at the anal entry design of Z-onedoll
@bobhenry: I'm really sorry to hear your situation, I also assume that the TPE of that doll is kinda weird. Last time, I quite "painted" with Preparer on mine - no reaction like you had with yours.
Ive been checkig these z one dolls this morning. Looking fine. And i have received a very nice offer from ordoll yesterday so Im kinda not sure what to do. Honestly Id rather have my 170 fixed. I like that she is tall.
Just look at this awesome jiggling
https://vimeo.com/215629288
I seriously wonder, why manufacturers don't learn. Even the new ones. Is it really to keep the business up?!
They might come up with a super awesome new skeleton, but in terms of TPE durability for the "critical" parts, they suck again:
I really don't get it...
Re: My 170M Cup review and pics
The price for the 151 is pretty good, but she's a midget! I'm a 6FTer
I was gonna order an or162, but after reading some of your posts lately, I've put this idea on the shelve for now and started fixing my doll again.
- MoviePilot
- Doll Advisor
- Posts: 598
- Joined: Sat Aug 13, 2016 8:37 pm
- Contact:
Re: My 170M Cup review and pics
bobhenry wrote:that z doll 151 is definitely nice. the hole gaps are a bit larger and silicone so it's gonna last longer for sure.
The price for the 151 is pretty good, but she's a midget! I'm a 6FTer
I was gonna order an or162, but after reading some of your posts lately, I've put this idea on the shelve for now and started fixing my doll again.
Ok, good to know that you go for another repair. Wish you all the best for it.
Would be great to keep us posted on the progress - as it's a really valuable experience
Re: My 170M Cup review and pics
PARTY LIKE IT'S 1999
Re: My 170M Cup review and pics
It might make the crack look a little deeper as well.