WM Hole Placement
-
- TDF Staff Alumni
- Posts: 9726
- Joined: Tue Mar 05, 2013 5:53 am
- Location: peanut gallery
- Contact:
Re: WM Hole Placement
Still looks way off to me, but I'm a picky so and so.
Also,we are posting in WM's forum and this should stay here so they see it, so please stop naming/comparing other specific brands in this topic, per rule 12. http://dollforum.com/tdf_rules.html
Re: WM Hole Placement
Re: WM Hole Placement
I've edited my post o'wise one.Slew wrote:
Still looks way off to me, but I'm a picky so and so.
Also,we are posting in WM's forum and this should stay here so they see it, so please stop naming/comparing other specific brands in this topic, per rule 12. http://dollforum.com/tdf_rules.html
Ty for bringing it to my attention.
Btw you're not picky.....you're just correct in what you say Slew.
Maybe some guys are ok with it and don't mind moving the doll around breaking their backs in order to get a good angle and motion going. Then again perhaps some of those same guys that are ok with it are also ok with driving a car with square wheels
-
- TDF Staff Alumni
- Posts: 9726
- Joined: Tue Mar 05, 2013 5:53 am
- Location: peanut gallery
- Contact:
Re: WM Hole Placement
I'm working on an updated poll to run, picking up where jm6o8u left off in 2017. This should be ready soon.
Re: WM Hole Placement
Re: WM Hole Placement
First there was Jesus...and along came Slew.Slew wrote: I'm working on an updated poll to run, picking up where jm6o8u left off in 2017. This should be ready soon.
I would like to nominate Slew as president of the proper hole placement society of America PHPSA.
Lead on Slew. Strength in numbers.
Re: WM Hole Placement
I know right.ColColt wrote:I feel relatively sure the Chinese know where proper hole placement should be. I know their women are no different than they are anywhere else so, why not do them all the same instead of having one height/weight better than another-make them correct and all the same and posts like this won't even be necessary.
What kind of R and D do these people have?
Do they even test their own product's?
Too bad it didn't go something like this....
Shop Foreman: Ok Jon...we're going for lunch now but in the meantime I want you to fuck this new doll for an hour or so and give me your feedback.
Jon: Yes sir as you wish.
I'd be happy to be a beta tester banging dolls all day over there .
- subcyclist
- Senior Member
- Posts: 414
- Joined: Sat Jul 14, 2018 11:51 am
- Location: NoCar (US)
- Contact:
Re: WM Hole Placement
I hope that you will be very happy with this doll, DRo2992. I am thinking positive thoughts for her to have a safe trip, and arrive in perfect condition at your house. Congratulations! Fantastic choice for a compannequin.
Annika - RLSD 141F + WM 195 (viewtopic.php?f=240&t=151741)
Larissa - WM 174G + YL133
Member of the Curvy Girl Asstronomy League (CGAL) - "We lustfully observe their stellar (m)asses!"
Re: WM Hole Placement
At least we now know that the angle is right. The hight might be an issue but in my experience, once the angle is right, one can adjust the rest manually and get satisfactory results.
Please keep us updated and enjoy your new toy tomorrow, I m sure you will.
- setevoltas
- Super Moderator
- Posts: 8366
- Joined: Sun Oct 28, 2018 3:03 am
- Contact:
Re: WM Hole Placement
Agreed, thank you, and enjoy yourself.subcyclist wrote:DRo2992, thank you very much for the photos. This doll's overall appearance caught my attention immediately, and now that the hole placement looks to be quite adequate, it might probably be my next purchase. As a few people have stated, it is not perfect placement for accurate appearance; however, it looks to be far more functional than some past dolls we have been discussing. I am very satisfied with this design - mostly because the overall aesthetics are amazing.
I hope that you will be very happy with this doll, DRo2992. I am thinking positive thoughts for her to have a safe trip, and arrive in perfect condition at your house. Congratulations! Fantastic choice for a compannequin.
This doll seems to fall into the "not right but closer than before" category. Which means she still in my top 3 on the future purchase list. That body...
Re: WM 173cm H cup new doll coming! this head is #162 head
WM never came through with the hole placement pictures.upsux wrote:
Matter of fact - attention to WM - if you don't show a photo in this thread I'll buy a second 173 from you as a thank you for ignoring all this entitled noise. I'll turn around and donate it for free to someone who can appreciate it because at this point I'll gladly drop $2k+ just to know you guys aren't going to get what you want by acting like children.
Everyone has been asking for weeks.
When are you going to start a new thread about how your going to donate your second doll?
Also where are your pictures from the factory that you said you were going to post. Did you even buy a first doll, from which supplier? Let alone a second.
Re: WM 173cm H cup new doll coming! this head is #162 head
+1pyzano wrote:WM never came through with the hole placement pictures.upsux wrote:
Matter of fact - attention to WM - if you don't show a photo in this thread I'll buy a second 173 from you as a thank you for ignoring all this entitled noise. I'll turn around and donate it for free to someone who can appreciate it because at this point I'll gladly drop $2k+ just to know you guys aren't going to get what you want by acting like children.
Everyone has been asking for weeks.
When are you going to start a new thread about how your going to donate your second doll?
Also where are your pictures from the factory that you said you were going to post. Did you even buy a first doll, from which supplier? Let alone a second.
Re: WM Hole Placement
Just so I remain fair to certain members. Before they accuse us for highjacking threads.Let me repost this here.mandos wrote:
This and the other thread has turned into a trolling and bashing thread IMO. People are trying to help and you shoot them down - IMO only achieving the complete opposite of what you are looking for, and eventually these threads or posts will be removed if you continue - what good would that be for the community? Who wants to help when you guys are behaving like children anyway...
You take pieces of information and facts that you have read or heard somewhere and twist it around to suit your trolling agenda. I say be constructive or go somewhere else. This specific doll is still brand new, more photos will surface in time - I am sorry this is not moving fast enough for you. If I did have this doll I would have done some photos for you to shut you up, but sadly I do not have this doll.
Original thread:
https://www.dollforum.com/forum/viewtop ... 5&t=119718
I apologise to the poster for us actually starting a discussion he didn't like, hense he labling it not contructive. If what he says was true, we would have vendor pictures of Jasmin circulating since over a year showing if her hole placements are practible in doggy . Anyone long enough here knows that such images have only been presented by forum members, not WM or any of their vendors. This is my opinion after hours of searching this forum and various vendor sites for practible images regarding wm 163cm h cup, 170cm h and m cup and 173cm h cup.
I m not against WM, their TPE is in my opinion top of the tier. But that doesn't mean that I just should not post my opinion on threads they create waving big butt pics in our faces and hoping we will just get our money out without asking some essential questions (my opinion). As it seems only posts praising the product are welcome on some vendor threads . Any critisism, even when in an objective and respectful manner, is treated like a desregard of board rules.
Re: WM 173cm H cup new doll coming! this head is #162 head
You guys know these dolls take upwards of a month or more to make and ship, right? You continue to showcase your ignorance with every post and since I won't be seeing you online anymore you'll just have to keep your eyes peeled.btasqan wrote:+1pyzano wrote:WM never came through with the hole placement pictures.upsux wrote:
Matter of fact - attention to WM - if you don't show a photo in this thread I'll buy a second 173 from you as a thank you for ignoring all this entitled noise. I'll turn around and donate it for free to someone who can appreciate it because at this point I'll gladly drop $2k+ just to know you guys aren't going to get what you want by acting like children.
Everyone has been asking for weeks.
When are you going to start a new thread about how your going to donate your second doll?
Also where are your pictures from the factory that you said you were going to post. Did you even buy a first doll, from which supplier? Let alone a second.