Buying some TPE Glue from WM
Re: Buying some TPE Glue from WM
- ZannyDanger
- Doll Elder
- Posts: 2547
- Joined: Mon Jun 05, 2017 6:32 pm
- Contact:
Re: Buying some TPE Glue from WM
Otherwise cut some spare tpe from her test piece, melt it in there one small chunk at a time with a temperature controlled soldering iron, forming it into thin layers until the hole is filled, then finish it as cleanly as possible with the heated spoon method i posted earlier. (if your doll didn't come with a test piece you could harvest some tpe from the top of her neck instead)
that's how i would do it anyway
Re: Buying some TPE Glue from WM
Re: Buying some TPE Glue from WM
If you are going to use heat/melt be sure you have decent ventilation. Fumes not too healthy. if you have an outdoor area you can work from, do that.kambui wrote:Thanks I think that's the plan. I did get filler but it just made a mess.
- ZannyDanger
- Doll Elder
- Posts: 2547
- Joined: Mon Jun 05, 2017 6:32 pm
- Contact:
Re: Buying some TPE Glue from WM
Very true.RGC_0767 wrote: If you are going to use heat/melt be sure you have decent ventilation. Fumes not too healthy. if you have an outdoor area you can work from, do that.
It wouldn't hurt to check with Samara also, especially since you're a BCD customer.
I'll only give advice on things that i have done myself and have proven to work well, though Samara has lots more experience under her belt doing repairs.... she could know something i don't!
Re: Buying some TPE Glue from WM
Re: Buying some TPE Glue from WM
Being Canadian our Walmarts lack much of the stuff that US stores have, but it could be another weapon in the arsenal. Works well for fingernails no doubt. This stuff dry stiff?
In vaginal areas is what I need to look into for future. it's why I am playing Chemistry Beasty boy should not be so rough on his delicate lady doll down there
-
- Active Member
- Posts: 152
- Joined: Sat Mar 25, 2017 2:11 am
- Contact:
Re: Buying some TPE Glue from WM
Does not dry stiff iv fixed several of her fingers and many other holes works great all you need is a drop. Much easier than the tpe and works better in my opinionRGC_0767 wrote:Being Canadian our Walmarts lack much of the stuff that US stores have, but it could be another weapon in the arsenal. Works well for fingernails no doubt. This stuff dry stiff?
In vaginal areas is what I need to look into for future. it's why I am playing Chemistry Beasty boy should not be so rough on his delicate lady doll down there
Re: Buying some TPE Glue from WM
Our walmart is no for it.... But our Amazon carries it. 10 bucks + 2.86 shipping here... I use the fast set glue all the time with various things. But having more fun perfecting my Xylene/TPE mix... takes very little Xylene to make a mix. less than a 1/4 teaspoon of Xylene. to a bunch of TPE. I bought a 2 pound sex toy back in November LOL, I HATE IT... it sucks!!!! I'm wondering if it might be silicone. it is pretty flexible and floppy... it sucks!!! hate it!! oh, already said that!!gator048 wrote:Does not dry stiff iv fixed several of her fingers and many other holes works great all you need is a drop. Much easier than the tpe and works better in my opinionRGC_0767 wrote:Being Canadian our Walmarts lack much of the stuff that US stores have, but it could be another weapon in the arsenal. Works well for fingernails no doubt. This stuff dry stiff?
In vaginal areas is what I need to look into for future. it's why I am playing Chemistry Beasty boy should not be so rough on his delicate lady doll down there
been cutting pieces off it for "Parts" have enough of it This thing is a virgin too. Very awkward, so floppy it was like trying to shag a wasted chick
-
- Active Member
- Posts: 152
- Joined: Sat Mar 25, 2017 2:11 am
- Contact:
Re: Buying some TPE Glue from WM
Re: Buying some TPE Glue from WM
I just look at my doll as a toy. Toy's are to be used. They only become collector items after we are dead. Enjoy the toy, but do not abuse it. I have to fix the vag on mine soon. Was thinking of installing the flaps from the toy posted above.Pantyscientist wrote:I'm just terrified of using the wrong thing. She's in good condition, minor staining and the nipple and soles of her feet (happened before I got her.) I've been pretty careful. She gets washed and powdered the more we play. Lately I've been way too tired.
Getting the right stuff is key. But unfortunately, capitalists rule and the proper stuff is big bucks for very little volume. Might be worth it to spend more and do it right, than make things worse. I just like to tinker with stuff. sometimes it's a winner situation, sometimes not...
-
- Active Member
- Posts: 152
- Joined: Sat Mar 25, 2017 2:11 am
- Contact:
Re: Buying some TPE Glue from WM
I know she's a toy, but I want her to stay in good condition for a long time. I can afford the expensive repair and I know that it'll be a great buy. Eventually, I hope to pass Nila to another doll lover and maybe buy Lillian.RGC_0767 wrote:I just look at my doll as a toy. Toy's are to be used. They only become collector items after we are dead. Enjoy the toy, but do not abuse it. I have to fix the vag on mine soon. Was thinking of installing the flaps from the toy posted above.Pantyscientist wrote:I'm just terrified of using the wrong thing. She's in good condition, minor staining and the nipple and soles of her feet (happened before I got her.) I've been pretty careful. She gets washed and powdered the more we play. Lately, I've been way too tired.
Getting the right stuff is key. But unfortunately, capitalists rule and the proper stuff is big bucks for very little volume. Might be worth it to spend more and do it right, than make things worse. I just like to tinker with stuff. sometimes it's a winner situation, sometimes not...
Re: Buying some TPE Glue from WM
You sound like a person who looks after things you own. I'm the type of person who will fix my own car before taking to a mechanic. 99% of the time I do a far better job, and use better parts. I am surprised how tough the dolls are. There was a couple times I thought I busted her fingers but they stood up. They're like a baby, take bumps and scuffs but surprisingly strongPantyscientist wrote:I know she's a toy, but I want her to stay in good condition for a long time. I can afford the expensive repair and I know that it'll be a great buy. Eventually, I hope to pass Nila to another doll lover and maybe buy Lillian.RGC_0767 wrote:I just look at my doll as a toy. Toy's are to be used. They only become collector items after we are dead. Enjoy the toy, but do not abuse it. I have to fix the vag on mine soon. Was thinking of installing the flaps from the toy posted above.Pantyscientist wrote:I'm just terrified of using the wrong thing. She's in good condition, minor staining and the nipple and soles of her feet (happened before I got her.) I've been pretty careful. She gets washed and powdered the more we play. Lately, I've been way too tired.
Getting the right stuff is key. But unfortunately, capitalists rule and the proper stuff is big bucks for very little volume. Might be worth it to spend more and do it right, than make things worse. I just like to tinker with stuff. sometimes it's a winner situation, sometimes not...