188 YL oral sex review
- MikeOxbigg
- Senior Member
- Posts: 466
- Joined: Tue May 10, 2016 1:05 pm
- Location: PA
- Contact:
188 YL oral sex review
Enter a second hand (new) 188 (from TDF sales) into the picture. This was meant to be my practice head for whatever since I already have a 188 YM face for my doll, so of course I had to give the oral capabilities a try, just for the sake of doing a review of course. Ahem.
I used Astro Glide for my lube and gave her a try! I first put her on the edge of the bed and inserted myself. First impression was there are some definitive possibilities here. Keeping her on the bed wasn't going to do it so I took her in my hands and worked her back and forth on me like what a real girl would do giving a good blow job. The key word there is 'good'. I've had way more bad blow jobs than good ones from rg's. I had to relube a few times but once she was properly lubed, it felt really good!
Now the bad. After a few minutes I turned her head to the side a little to get a better view and I broke through into her right eye socket and pushed her eye out. Well that kinda killed the mood a bit realizing I just damaged my brand new head. But she insisted on finishing the job and I obliged. I went back to the top down (natural top of the head) view (minus an eye) and went to town. I'll tell ya it didn't not feel like a real (good) blow job from a real girl! The visual was nice too! After about a total of 5 minutes (it was just a quickie before work) I had a really nice orgasm, again not unlike coming from a real blow job.
Overall a definite thumbs up! At the end of the day, all any guy wants is just to get his dick sucked and this certainly does the job without the bullshit.
I'll prob give her another run tonight after work and I'll do a follow up review.
I def recommend just keep her straight on, natural top of the head view, don't turn her to the side and you should fair pretty well.
Comments and personal experiences/techniques would be appreciated! Thanks!
- Dollarhyde
- Doll Oracle
- Posts: 8441
- Joined: Sat Jul 02, 2011 9:22 pm
- Location: The Tardis Somewhere In the Timey Wimey
- Contact:
Re: 188 YL oral sex review
http://www.dollalbum.com/dollgallery/in ... ?cat=13267
"Dammit Jim I'm a doctor, not a doll maker!"
Re: 188 YL oral sex review
- Dollarhyde
- Doll Oracle
- Posts: 8441
- Joined: Sat Jul 02, 2011 9:22 pm
- Location: The Tardis Somewhere In the Timey Wimey
- Contact:
Re: 188 YL oral sex review
True but 6Ye does...dollarfan wrote:WM should make a head with wide open mouth and throat big enough for blowjob.
http://www.dollalbum.com/dollgallery/in ... ?cat=13267
"Dammit Jim I'm a doctor, not a doll maker!"
- curiousswede
- Doll Mentor
- Posts: 1848
- Joined: Sat May 26, 2018 11:07 pm
- Location: Sweden
- Contact:
Re: 188 YL oral sex review
I would love to be able to not having to use a condom but I wonder how the heck you would go about to clean her without having to really tear all her mouth up? On some heads, from what I have read, the end of the head is not sealed so it would make any fluid get into the metallic part of the head which could run down to the body skeleton and voila, rust is here.
- Dollarhyde
- Doll Oracle
- Posts: 8441
- Joined: Sat Jul 02, 2011 9:22 pm
- Location: The Tardis Somewhere In the Timey Wimey
- Contact:
Re: 188 YL oral sex review
To clean her oral cavity all you would need is your anti-bacterial solution and a bulb or douche container to flush out her oral cavity...curiousswede wrote:I have had oral sex with one head, WM#136, and I use a dry condom (no lube since all lubed condoms are silicone(!)) and then applied water-based lube and it was nice but I was careful to never go all the way in because I knew it would've might made the eyes pop out which would destroy the realism. I have never received blowjobs (at least not with orgasms) from RGs so I cannot really compare.
I would love to be able to not having to use a condom but I wonder how the heck you would go about to clean her without having to really tear all her mouth up? On some heads, from what I have read, the end of the head is not sealed so it would make any fluid get into the metallic part of the head which could run down to the body skeleton and voila, rust is here.
http://www.dollalbum.com/dollgallery/in ... ?cat=13267
"Dammit Jim I'm a doctor, not a doll maker!"
- curiousswede
- Doll Mentor
- Posts: 1848
- Joined: Sat May 26, 2018 11:07 pm
- Location: Sweden
- Contact:
Re: 188 YL oral sex review
Douche container, that was a new word for me to look up pictures on. It is a small soft bottle that you fill with water and then squeeze the water out from its muzzle at top? Would you put it all the way in into the mouth and then squeeze water and let the water run out? I imagine I would have to hold the head up with the mouth pointing down so gravity would help?Dollarhyde wrote:To clean her oral cavity all you would need is your anti-bacterial solution and a bulb or douche container to flush out her oral cavity...curiousswede wrote:I have had oral sex with one head, WM#136, and I use a dry condom (no lube since all lubed condoms are silicone(!)) and then applied water-based lube and it was nice but I was careful to never go all the way in because I knew it would've might made the eyes pop out which would destroy the realism. I have never received blowjobs (at least not with orgasms) from RGs so I cannot really compare.
I would love to be able to not having to use a condom but I wonder how the heck you would go about to clean her without having to really tear all her mouth up? On some heads, from what I have read, the end of the head is not sealed so it would make any fluid get into the metallic part of the head which could run down to the body skeleton and voila, rust is here.
How do you go about drying it without causing too much abrasions inside the mouth? I would love to figure these two steps out so I can get an exclusive head (hah!) just for oral sex mainly as I realize it will cause tears with extensive use.
- MikeOxbigg
- Senior Member
- Posts: 466
- Joined: Tue May 10, 2016 1:05 pm
- Location: PA
- Contact:
Re: 188 YL oral sex review
Not worried about any tearing because this is not going to be a display head.Dollarhyde wrote:Nice... but as you may know while the heads can be used for oral it's not always recommended due to the tearing around the corners of the mouth... but I am glad you had an enjoyable time...
- MikeOxbigg
- Senior Member
- Posts: 466
- Joined: Tue May 10, 2016 1:05 pm
- Location: PA
- Contact:
Re: 188 YL oral sex review
Yes I should have mentioned the oral cavity is not very deep. At about 6" in length I was bottoming out but that also added to the realism of it being like a real blow job.dollarfan wrote:WM should make a head with wide open mouth and throat big enough for blowjob.
It would be nice if the canal was a little deeper though.
- curiousswede
- Doll Mentor
- Posts: 1848
- Joined: Sat May 26, 2018 11:07 pm
- Location: Sweden
- Contact:
Re: 188 YL oral sex review
How did you go about cleaning and drying after to prevent mold ?MikeOxbigg wrote:Yes I should have mentioned the oral cavity is not very deep. At about 6" in length I was bottoming out but that also added to the realism of it being like a real blow job.dollarfan wrote:WM should make a head with wide open mouth and throat big enough for blowjob.
It would be nice if the canal was a little deeper though.
- Dollyman25442
- Doll Mentor
- Posts: 1445
- Joined: Fri Aug 11, 2017 11:30 pm
- Contact:
Re: 188 YL oral sex review
They do!dollarfan wrote:WM should make a head with wide open mouth and throat big enough for blowjob.
Alexchui on Ebay sells a wideopen mouth head but he's also well known for being a "less than honest" vendor. It's a crap shoot with him. I got one but it was way way darker in color than what was advertised and while he would refund (if I aid the shipping) he WOULD NOT under any circumstances do a replacement. But....the wide open mouth head does exist (and it def won't tear at the corners)
- MikeOxbigg
- Senior Member
- Posts: 466
- Joined: Tue May 10, 2016 1:05 pm
- Location: PA
- Contact:
Re: 188 YL oral sex review
I did a quick clean up before I left for work. I'm not over concerned bc this head is going to get used thoroughly. When I'm through w her I'll probably take it apart to see how the skull is made.curiousswede wrote:How did you go about cleaning and drying after to prevent mold ?MikeOxbigg wrote:Yes I should have mentioned the oral cavity is not very deep. At about 6" in length I was bottoming out but that also added to the realism of it being like a real blow job.dollarfan wrote:WM should make a head with wide open mouth and throat big enough for blowjob.
It would be nice if the canal was a little deeper though.
- MikeOxbigg
- Senior Member
- Posts: 466
- Joined: Tue May 10, 2016 1:05 pm
- Location: PA
- Contact:
Re: 188 YL oral sex review
I was quite a few girls along until I met one that could make me pop with just her mouth. I think I was 27 and she was 19. A cute little blonde. We worked together. She was on the outs with her bf so she was hooking up with me (because that's what they do). We had sex once and she gave me two blow jobs to completion and swallowed. It was a quick fling but it was fun while it lasted.curiousswede wrote:I have never received blowjobs (at least not with orgasms) from RGs so I cannot really compare.
I forgot to mention... Her actual name was "BJ". I'm not kidding!!!
I'd say that's about the best orgasm you can have. I think it's great because you have no control over it. The doll head isn't exactly the same but when lubed up sufficiently it's pretty damn close and it's better than the majority of rg's that gave me oral.
- MikeOxbigg
- Senior Member
- Posts: 466
- Joined: Tue May 10, 2016 1:05 pm
- Location: PA
- Contact:
Re: 188 YL oral sex review
Which head is that? Good for oral??Dollarhyde wrote:
True but 6Ye does...
- MikeOxbigg
- Senior Member
- Posts: 466
- Joined: Tue May 10, 2016 1:05 pm
- Location: PA
- Contact:
Re: 188 YL oral sex review
I also noticed it appears the head is not just one solid piece of TPE as I first assumed. There appears to be a much thinner cosmetic layer over a core layer. This is probably old news to the veterans but new to me.
If it were one solid piece, I don't believe there would be a problem with the eyes. It appears there is a canal in the center (past the cosmetic layer) where your manhood is supposed to go. I can see how it can easily slip to the side and do damage like I did. If the oral canal was deeper and possibly straighter, that would be a better option. But I suppose the canal was designed upward so your most sensitive areas are making contact.
Question for the veterans:
Are all the different brand's mouths/heads designed the same way?
Thanks!!!