DS Insert Comparison Video
Moderator: jiayi
DS Insert Comparison Video
Below is my latest video, where I compare all currently available DS inserts including a look at all of them inserted in a DS 145cm doll.
-------------------------------------------------------------------------------------------------------------------------------------
Password for video: dolls
-------------------------------------------------------------------------------------------------------------------------------------
A few notes to add on top of the video:
- The "B" type insert doesn't feature a matte coating like the other inserts, so it leaks some oil. Will update this post if this is only a temporary occurence.
Update: Oil leak has lessened noticeably, a thorough washing / powdering and exposure to room temperature air are the only newly introduced factors. Leaking has resumed though, with a paper under the insert showing the same stain pattern as before, just at a slower rate.
- The "G" type insert is the most expensive insert at one unit for $19 (all other inserts are two for $19). It is also tighter than the other inserts, making insertion uncomfortable without using plenty of lubricant.
Choosing a good DS insert is tough just with the four available, and from experience built in is usually far more pleasurable and fulfilling. From the time spent with these inserts I can still recommend the "B" type one just make sure to clean out your doll's cavity after use from oil leaking, and the "G" is alright but just too tight. It may loosen up in time but is better used for the bigger bodies, in the 145cm body it is a little too long and could use some room to stretch.
- Sate
Update: As I thought, the "B" type insert is the best one out of the four. Once inserted, it stay solidly inside and provide a large opening for intercourse with gentle ribbing inside. Positions such as doggystyle are easier to accomplish thanks to the larger opening. The only downsides are those previously mentioned, the insert does leak some oil so it's best not to leave it in your doll at rest, and in the 145cm body the insert just about covers the cavity entrance and may contribute to tearing on the edges if used too harshly (wild pumping or stretching).
The "G" style insert provides a fairly nice experience as well but is behind the "B" type in satisfaction. The "G" type is very tight and hard to enter without proper lubrication, and being the longest insert may stick out from the cavity as little depending on which doll body you have, with the mushroom style head not being flush with the vaginal cavity entrance.
- Elsa Babe 148cm RAD Doll - viewtopic.php?f=541&t=148889
Sate's Doll Archives
http://dollforum.com/forum/viewtopic.php?f=11&t=84142
Special
Action Figures: viewtopic.php?f=64&t=95008
Video Game Models: viewtopic.php?f=11&t=130012
Re: DS Insert Comparison Video
I still think that DS is really trailing in the inserts department. I love the shape of my DS163+ .. but her inserts look terrible once her legs are spread apart (doesn't feel too bad .. just looks bad). They really need to rethink that.
- Nadia's Masturbation Comic-Style Post **HOT**
- Reetzia Stripping Down in Stereoscopic 3D **HOT**
- Nadia's Pictorial Post (DS163+, Sandy Head)
- Reetzia's Pictorial Post (DS163+, Kayla Head)
- How many dolls owners own in secret?
- What was your primary INTENDED use of your doll?
Re: DS Insert Comparison Video
- SinsuaLuvr
- Doll Mentor
- Posts: 1533
- Joined: Tue Nov 30, 2004 12:00 am
- Location: Alaska
- Contact:
Re: DS Insert Comparison Video
Thank you for your time, dedication; wonderfully presented! Mods I recommend making this a sticky thread under DS.
April - 80cm elfling (silicone-9lbs) ~ 2016 from JM Dolls
Tawney - 132cm {Lexi head} - (silicone-45lbs) ~ 2017 from Private Island Beauties
Sophie - Piper 100cm {Jessica head} - (silicone-28lbs) ~ 2024 from SexDollCanada
Olivia - AK6 157cm {#45 head} - (silicone-68lbs) ~ 2024 from RosemaryDoll
”My Better Half” - 90cm Legs & Hips (TPE - 24lbs) ~ 2024 Seiraku Toys from Onahole
Re: DS Insert Comparison Video
I haven't tried other inserts in my doll just yet, for this video I only wanted to present what DS currently provides for their own dolls, especially looking at how they match the cavity provided.zhengxxx wrote:thanks for sharing. looking for this long time, and have you try different brand insert to ds 145? like meiki? if yes what would you recommend?
Haven't taken the time to look at sleeve inserts but essentially what would work best is an insert, at least for the 145cm doll, that is cylinder shaped and a little fat, has large puffy style lips, and is no longer than 6 inches so it can match the cavity size. Even then, it can't be too big otherwise it can put pressure on the cavity entrance and lead to tearing.
- Elsa Babe 148cm RAD Doll - viewtopic.php?f=541&t=148889
Sate's Doll Archives
http://dollforum.com/forum/viewtopic.php?f=11&t=84142
Special
Action Figures: viewtopic.php?f=64&t=95008
Video Game Models: viewtopic.php?f=11&t=130012
- TPEsnack
- Ex-Member
- Posts: 219
- Joined: Sun Sep 17, 2017 4:56 am
- Location: Eventually the Laotian countryside. Or Havana
Re: DS Insert Comparison Video
I would like to see doll makers focusing on what they do best - dolls. And make the channel large enough to accommodate any meiki. Onahole manufacturers stick to what they do best. But integrate them.
I have the 'S' inert and it is painfully hard for me. So, I can't use it. Your post educated me that the Doll Sweet silicon insert wasn't soiled from a previous useer's lube (ugh). It leaks oil.The nature of the beast.
I have some Japanese and American wankers where the sensation is much better - more stimulation, tighter etc. One even has a uterus. Adding a uterus is a major step forward in my opinion. As is having the insert itself substantial. And no labia minor - only camel toe. All a matter of taste of course.
Now I will look to see if anyone has posted a chart comparing which manufacturers have mutually interchangeable inserts.
Re: DS Insert Comparison Video
Re: DS Insert Comparison Video
Looking at your photo, It is possible your longer middle one is an R type or just a slightly longer version of the S type. I took a couple pictures with my R and S type side by side, one with the B type alongside as well. The R type is be noticeably a bit thinner than the S type, but your inserts look to me like they are the same girth, so this makes me think they are all actually type S. The new type S appear like a smaller version of the type B with the wider opening and only coming in red/pink, not body color.
If you get one, I'd be curious what you think of it. Sate said the design of the insert and newer 145 dolls was better, but nobody has reported how the new insert is with older 145 cm dolls. He has some photos in this thread:
viewtopic.php?f=143&t=99902&start=15
Re: DS Insert Comparison Video
Re: DS Insert Comparison Video
Re: DS Insert Comparison Video
- Simplicity
- Senior Member
- Posts: 274
- Joined: Mon Jan 15, 2018 1:36 am
- Location: California
- Contact:
Re: DS Insert Comparison Video
I also have the "B" and "G" type inserts because I wanted to see how they were like. From my experience though.. the "B" type does not fit into the 145 DS cavity, as I did try to get it to fit but it wouldn't even go in because of it's size to the point that I made the mistake of trying to expand the cavity opening with my fingers at the top. By doing so I made a tear but I fixed it with "Permatex Windshield Sealant Flowable Silicone". A point to note is never ever try to stretch out the Silicone at the cavity entrance, only wiggle it in carefully like in the video shown on the DS site.
I tried the "G" type and my god is it really really tight at the entry. My brother down there started feeling raw within 5-10 secs because of how right it was, even with additional lubricant. But as for how well it fits in the DS 145, I'd say it fits pretty ok like the "S" type that comes with the doll.
I attached some images of the tear and how well the "S" type for DS 145 fit. Of course I didn't push the insert all the way in so it sticks out a little to show how well it fits in general.
- Attachments
JY 170CM - Found a new home
Re: DS Insert Comparison Video
My last DS doll was a 145cm plus made in 2018, and they did noticeably reduce the size of the cavity opening, which prevent the insert from falling out like in earlier models, and improves the overall look.
It's a half step in one way, they made the cavity smaller to hold the insert better but didn't do anything with the anal cavity.
- Sate
- Elsa Babe 148cm RAD Doll - viewtopic.php?f=541&t=148889
Sate's Doll Archives
http://dollforum.com/forum/viewtopic.php?f=11&t=84142
Special
Action Figures: viewtopic.php?f=64&t=95008
Video Game Models: viewtopic.php?f=11&t=130012
- Simplicity
- Senior Member
- Posts: 274
- Joined: Mon Jan 15, 2018 1:36 am
- Location: California
- Contact:
Re: DS Insert Comparison Video
JY 170CM - Found a new home