Flandre's alternate breasts

Shadow X · Post by **Shadow X** » Fri May 09, 2014 11:41 pm

From what I said in this topic, I mentioned that Flandre also has a change of breasts for a while now. So this is pretty much how they look like:

Link to the product: http://en-nls.com/disp_product.php?pid= ... 2=12001021

They're supposed to be an A cup, but somehow I doubt it. Makes me wonder how the F cup would look like

. They could've been a bit smaller, but still they're just about the right size. It's easy enough to attach them on to her and can last a long time if you're careful enough. I'm still trying to find a way to get them on without the upper straps, but I don't think it's possible.

I tried to put it under the skin, but they didn't look that great that way. The space inbetween the breasts would not show unless you sew it, which I don't want to do because I want to vary between Flandre's breasts. I guess she's pretty much in the same boat as Sakura's

Perhaps I'll try to find an alternative method to give her the same breast size that can go within the fabric, but I don't know if it's possible to bring good result without having to do some sewing and making it permanent.

skyknight · Post by **skyknight** » Sat May 10, 2014 2:17 am

That's why I bought the smallest I could find, but they still don't look too good under her skin without sewing it on permanently. But at least they don't stretch her chestfabric out as much as these would

I'm leaving them off for the most time, I'm more of a flatchest lover anyway.

Now yours look more like a bigger B or even a C- cup.
You should give the ones I got a try http://en-nls.com/pict1-33368?c2=12001021
Or try those that seem to be higher quality http://en-nls.com/pict1-34772?c2=12001021
I wouldn't try to put anything bigger inside of the fabric skin!

DollAfficionado · Post by **DollAfficionado** » Sat May 10, 2014 2:19 am

Those tits are a nice option. I see their main use being for photography when you want to take fuller-chested shots.

Obin · Post by **Obin** » Sat May 10, 2014 4:20 am

I imagine you could find a fabric that has a similar color and texture to the fabric on the doll and fit it to cover the straps, but she looks fine.

Shadow X · Post by **Shadow X** » Tue Jun 03, 2014 6:36 pm

A few weeks ago, I ordered the Quty Tits and tried to put it under Flandre's skin, but the results were the same. I don't want to throw it away though, so now I'm looking for a way to turn it into a bra with around the same fashion as the one in the main post. I guess I should just randomly pick a bra that would fit her and attach the Quty Tits on that, but I'm affraid the cups of the bra might get in the way. Has anyone ever tried to do something like I mentioned here?

I found this picture and it looks like a possibility, but the site's in a language I don't know so I wouldn't know how it's been done

http://cdn21.atwikiimg.com/lovebody?cmd ... =ai001.JPG

Tybalt · Post by **Tybalt** » Tue Jun 03, 2014 10:59 pm

P as int the bra to her skin tone.

Shadow X · Post by **Shadow X** » Wed Jun 11, 2014 9:28 pm

I'm trying to see if I can just attach them to a normal bra, but I'm a bit affraid of the chances of it not working out. I already had doubts of getting Flandre a bra, because of her small breasts and bust size and having difficulties finding the right size for me (I'm too inexperienced in this). In case my fears are becoming true, does anyone have any other idea on how to make a bra out of the Quty Tits or have any idea how I can make something like this:

Melchett · Post by **Melchett** » Tue Jun 24, 2014 3:21 am

I've been mulling over this problem too and found a couple of ideas.

This silicone breast octopus has C-sized pockets and is 30 cm wide on the front.

This silicone torso skin can be tailored to a doll's specifications, but has no pockets. The store owner sent me pictures of it turned inside out and the breasts are just skin, so the ad is inaccurate where it says the chest is solid.

Shadow X · Post by **Shadow X** » Wed Jun 25, 2014 11:22 am

The examples in there are over $200-300, which is definitely not going to cut it. Do you know of any others like that or any strap-on breast form that's more in the price range of $30-100? So far when I'm searching for anything like that, 60% of the time I find the same product as I'm already using for Flandre (But I had to get a new one because it broke. Like I said, their durability isn't impressive at all).

As for the Cuty Tits that I ordered a while ago, I tried glueing them on one of the broken strap-on breast forms, but it wouldn't stay in place at all so that option is already gone for me. Unless someone has actually made a strap-on bra with the Cuty Tits before and never had any problem with it, I won't be trying this anymore and just keep looking for existing ones.

Melchett · Post by **Melchett** » Wed Jun 25, 2014 4:34 pm

Shadow X wrote:The examples in there are over $200-300, which is definitely not going to cut it. Do you know of any others like that or any strap-on breast form that's more in the price range of $30-100? So far when I'm searching for anything like that, 60% of the time I find the same product as I'm already using for Flandre (But I had to get a new one because it broke. Like I said, their durability isn't impressive at all).

This would look better than your current product, but I have no idea if it's jiggly enough.

To use Qutys, maybe use a nude body shaper and cut holes as large as you dare. Or an open-cup bra like this, this, or this. I have no idea if these will work well, I'm just brainstorming.

Shadow X · Post by **Shadow X** » Wed Jun 25, 2014 8:45 pm

Hmm, the idea of an open-cup bra might be something to try. I can buy the Chippai-Chan that skyknight Linked earlier. It could then look something like this. But I want to try to get two things done with the bra:

- They should have the exact same color as my doll so you would barely notice it. Either that or something transparent, but the main idea is that it should blend in with the anime doll's skin color so it would (or almost) look like she wasn't wearing a bra.
- Seeing as these dolls are always small in size, it will be hard to find that bra with such a small size. I'm not sure what size her bra should be, but it comes close to 60-65 AA (European size) and good luck finding that. I think Skyknight might know what size they are.

But suppose I'm able to find that, the only problem I would still face then is how do I go about attaching them to the bra... Using glue clearly didn't work, so I need to figure out something else. If only I could somehow nail the breasts to the bra or figure out how they did it on the site I just linked.

Melchett · Post by **Melchett** » Wed Jun 25, 2014 11:58 pm

Here's something that looks promising: you can get a latex breastplate for $99. The picture looks hollow, and the vendor said there are no pockets, so the foam pads must be loose and easily replaced by Qutys. The ad says that the size is customizable, but I didn't ask how small they can go.

For those jury-rigged Qutys you provided a link to, the Google translation says they glued the Qutys to a sheet of plastic desk protector (like this one or this one?), cut away the excess material, punched holes, attached eyelets, and ran the string.

Melchett · Post by **Melchett** » Thu Jun 26, 2014 12:31 am

Another cool bit of information from the site: waterproofing spray stops silicone oil bleeding.

skyknight · Post by **skyknight** » Thu Jun 26, 2014 4:24 am

Sakura's striped bra is 65AA with adjustable straps. Her white bustier is size 12-14(I think they refer to the age of the girls that normally wear it)

Shadow X · Post by **Shadow X** » Thu Jun 26, 2014 3:32 pm

Melchett wrote:For those jury-rigged Qutys you provided a link to, the Google translation says they glued the Qutys to a sheet of plastic desk protector (like this one or this one?), cut away the excess material, punched holes, attached eyelets, and ran the string.

This might be worth trying out some day. I don't have the means to punch holes and add eyelets, so I need to go to the stores to find a non-expensive tool that can do both. Getting the string is easy, but I'm going to challenge myself to get the color the same as Flandre's skin. I will try to do this in the future with the Chippai Chan and using the glue from this repair kit]. NLS showed a video attaching silocone breasts to one of the Love Body Dolls, shown [url=http://www.youtube.com/watch?v=FAvuODmlAP0&feature=related]here and using that glue, so I hope that will be enough.

It sucks that the thing I tried to do with the Quty Tits failed and now I have to hope I can still get rid of the glue that was put on to it....