Say it ain't so!
- Bigbuttlover
- Doll Advisor
- Posts: 988
- Joined: Sun Jul 23, 2006 12:00 am
- Contact:
Say it ain't so!
http://www.ebizdisplays.com/neseasfema.html
I ordered it today and they emailed back saying that it has recently been discontinued.
And I cannot find another one with this pose. There's got to be others! Please help me find a mannequin with this pose for the left side of the doll. Please, please, please.
- Attachments
-
- Left Side Of Doll.jpg (13.19 KiB) Viewed 3344 times
- MannequinFan
- Vendor Affiliated
- Posts: 4720
- Joined: Wed Jan 04, 2012 8:58 pm
- Location: Central Illinois, U.S.
- Contact:
Re: Say it ain't so!
http://www.roxydisplayinc.com/webpage/m ... e/fr5.html
This may be a stupid suggestion, but could you get two right side mannequins and turn one of them 180 degrees?
YOU ARE HERE
My Blog-> mfcreations3d.blogspot.com ... Easy Move Eyes™
My Shapeways Shop-> shapeways.com/shops/mf-creations
- Bigbuttlover
- Doll Advisor
- Posts: 988
- Joined: Sun Jul 23, 2006 12:00 am
- Contact:
Re: Say it ain't so!
- Bigbuttlover
- Doll Advisor
- Posts: 988
- Joined: Sun Jul 23, 2006 12:00 am
- Contact:
Re: Say it ain't so!
I found this mannequin just now too, and it is not bad. Will it help in holding back the realdoll behind her? Maybe. Her left leg should prevent her from tipping forward as the realdoll behind her pushes back on her. I'll get it if I cannot find anything better. But is there one just like the original photo around???MannequinFan wrote:This is probably not exactly what you're looking for but here is one...
http://www.roxydisplayinc.com/webpage/m ... e/fr5.html
Re: Say it ain't so!
I do not recognize the model, but that could be because I cannot see it close up. If it is an import, my suggestion would be to call the manufacturer and ask them if you can contact their retailers to see if they have any in stock. You could also Google the model number, name of manufacturer and see if some retailers come up. Even if an item is discontinued, there is still the likelihood of being able to find one, somewhere. Which side of 'the pond' is your world? If you are in Europe, there are lots of used mannequins sellers and one of them might even have the model you are seeking. If you provide the make and model, perhaps someone in the forum can help you, as well.Bigbuttlover wrote:I have a doll for missionary position, and I want two female mannequins flanking her on either side and looking at her. There are MANY choices for mannequins for the right side, but apparently the only one that I can find for the left side is the one pictured below. It is perfect, but it has just been discontinued! And I cannot find another one with this pose. There's got to be others! Please help me find a mannequin with this pose for the left side of the doll. Please, please, please.
Sanhui - 145cm C Sakura Head
Sanhui - 102cm
6YE Doll - 132cm #3 Hd
ASDoll - 160cm Male
WMDoll - 168cm A #160 Hd
- Bigbuttlover
- Doll Advisor
- Posts: 988
- Joined: Sun Jul 23, 2006 12:00 am
- Contact:
Re: Say it ain't so!
It is from the Fleshtone Series, made in US I believe. Here is the website I found it from:Taylr wrote:I do not recognize the model, but that could be because I cannot see it close up. If it is an import, my suggestion would be to call the manufacturer and ask them if you can contact their retailers to see if they have any in stock. You could also Google the model number, name of manufacturer and see if some retailers come up. Even if an item is discontinued, there is still the likelihood of being able to find one, somewhere. Which side of 'the pond' is your world? If you are in Europe, there are lots of used mannequins sellers and one of them might even have the model you are seeking. If you provide the make and model, perhaps someone in the forum can help you, as well.
http://www.ebizdisplays.com/neseasfema.html
I ordered it today and they emailed back saying that it has recently been discontinued. I emailed back asking if they can buy one back from one of their customers, as I'm willing to pay extra for it. I sent an inquiry to a China retailer (whom I hardly trust) about this mannequin:
http://www.qrbiz.com/product/2081046/Ly ... equin.html
but I'm 99% sure it is the same darn mannequin, so it should be out of stock there too.
- Attachments
-
- Lying_Fashion_Female_Mannequin.jpg (44.5 KiB) Viewed 3323 times
- MannequinFan
- Vendor Affiliated
- Posts: 4720
- Joined: Wed Jan 04, 2012 8:58 pm
- Location: Central Illinois, U.S.
- Contact:
Re: Say it ain't so!
scroll down to bottom left of this page: http://www.davessurplus.com/mannekin/manq3c.htm
The prices on this site are always sky high so I don't usually check it much. But it seems to be available if you really want it.
MF
My Blog-> mfcreations3d.blogspot.com ... Easy Move Eyes™
My Shapeways Shop-> shapeways.com/shops/mf-creations
Re: Say it ain't so!
As far as prices go, it never hurts to pick up the phone and negotiate. The worse that can happen is that they say 'no.'
Sanhui - 145cm C Sakura Head
Sanhui - 102cm
6YE Doll - 132cm #3 Hd
ASDoll - 160cm Male
WMDoll - 168cm A #160 Hd
- Bigbuttlover
- Doll Advisor
- Posts: 988
- Joined: Sun Jul 23, 2006 12:00 am
- Contact:
Re: Say it ain't so!
Well... It is the exact same mannequin. So they are probably out of stock on it but don't know it. I'll try to order it anyway. If it works, then you're my new best buddy.MannequinFan wrote:Here you go BBL...
scroll down to bottom left of this page: http://www.davessurplus.com/mannekin/manq3c.htm
The prices on this site are always sky high so I don't usually check it much. But it seems to be available if you really want it.
MF
- Bigbuttlover
- Doll Advisor
- Posts: 988
- Joined: Sun Jul 23, 2006 12:00 am
- Contact:
Re: Say it ain't so!
Thanks for your great knowledge of mannequins too. Above you will see that my solution to my other thread has been found by using another doll (Maidlee Doll) that I forgot I had. She counterbalances the weight on the mattress caused by the realdoll well and allows me to get in and out of the bed comfortably. So the oral sex set-up is solved, and now working on the missionary set-up.Taylr wrote:The Chinese manufacturers make the same dolls for several retailers, under several different names, so I had a feeling there would still be product out there for you to find, and MF seems to have managed to do just that.
- Bigbuttlover
- Doll Advisor
- Posts: 988
- Joined: Sun Jul 23, 2006 12:00 am
- Contact:
Re: Say it ain't so!
- Bigbuttlover
- Doll Advisor
- Posts: 988
- Joined: Sun Jul 23, 2006 12:00 am
- Contact:
- Bigbuttlover
- Doll Advisor
- Posts: 988
- Joined: Sun Jul 23, 2006 12:00 am
- Contact:
Re: Say it ain't so!
- Attachments
-
- a.jpg (54.26 KiB) Viewed 3269 times
- Bigbuttlover
- Doll Advisor
- Posts: 988
- Joined: Sun Jul 23, 2006 12:00 am
- Contact:
Re: Say it ain't so!
Well, I got a refund from this website because he said that it is discontinued too. So apparently there is NO mannequin facing this direction in this position (but there are so many that face in the other direction). Unbelievable.MannequinFan wrote:Here you go BBL...
scroll down to bottom left of this page: http://www.davessurplus.com/mannekin/manq3c.htm
The prices on this site are always sky high so I don't usually check it much. But it seems to be available if you really want it.
MF
- Bigbuttlover
- Doll Advisor
- Posts: 988
- Joined: Sun Jul 23, 2006 12:00 am
- Contact:
Re: Say it ain't so!
http://www.mannequinworld.com/mannequin ... pe-09.html
but it costs 495 British pounds! DAYMNNNN!
- Attachments
-
- type_9.jpg (33.7 KiB) Viewed 3058 times