What is sought:
Torso
Characteristics:
1. Safe, non-toxic material (TPE?, SLE?)
2. Very realistic skin texture (that does not blur quickly), pores as 3D structure (so something on the level of irontechs new serie).
3. Very realistic anatomy (preferably based on body casts)
4. Physique such as Salma from S D T
5. Closed body openings (instead of these round, always open body openings, there should rather be more natural oval openings, which are kept closed by some flexible material)
Special requests (not definitely necessary, but could open up new possibilities):
Option for positions that require legs and arms.
The consideration is that a torso that would fulfill all these conditions
would certainly not be cheap. It would therefore be quite a restriction,
if some positions were not possible (or only possible to a limited extent).
Even if the idea is probably not entirely new, there doesn't seem to be a supplier yet who offers a torso doll that has not only a connector for a head
but also connectors for arms and legs.
The idea would be to produce very light and stable arms and legs, for example, from 3D printed structures
with appropriate connectors.
These structures could then be covered with items of clothing such as overknee boots and hand gloves.
Also silicone hands and feet would be conceivable.
The advantages would be obvious:
You wouldn't have to buy a whole doll at once, but you could buy individual parts as required.
Due to the lightweight construction, even the whole doll would probably be a lot lighter than a full-size product.
You don't always have to use a whole doll, but you can use just the torso when it has to be quick.
Replacing and repairing individual parts would be easier and therefore cheaper.
Storing individual parts would be easier than storing an entire doll.
The question is whether something like this already exists (especially when it comes to very realistic products)?
And if not, why not? For technical reasons? Or is there no interest in such a product?
Realistic versatile torso
Re: Realistic versatile torso
syntech wrote: ↑Mon Nov 06, 2023 10:26 am What is sought:
Torso
Characteristics:
1. Safe, non-toxic material (TPE?, SLE?)
2. Very realistic skin texture (that does not blur quickly), pores as 3D structure (so something on the level of irontechs new serie).
3. Very realistic anatomy (preferably based on body casts)
4. Physique such as Salma from S D T
5. Closed body openings (instead of these round, always open body openings, there should rather be more natural oval openings, which are kept closed by some flexible material)
Special requests (not definitely necessary, but could open up new possibilities):
Option for positions that require legs and arms.
The consideration is that a torso that would fulfill all these conditions
would certainly not be cheap. It would therefore be quite a restriction,
if some positions were not possible (or only possible to a limited extent).
Even if the idea is probably not entirely new, there doesn't seem to be a supplier yet who offers a torso doll that has not only a connector for a head
but also connectors for arms and legs.
The idea would be to produce very light and stable arms and legs, for example, from 3D printed structures
with appropriate connectors.
These structures could then be covered with items of clothing such as overknee boots and hand gloves.
Also silicone hands and feet would be conceivable.
The advantages would be obvious:
You wouldn't have to buy a whole doll at once, but you could buy individual parts as required.
Due to the lightweight construction, even the whole doll would probably be a lot lighter than a full-size product.
You don't always have to use a whole doll, but you can use just the torso when it has to be quick.
Replacing and repairing individual parts would be easier and therefore cheaper.
Storing individual parts would be easier than storing an entire doll.
The question is whether something like this already exists (especially when it comes to very realistic products)?
And if not, why not? For technical reasons? Or is there no interest in such a product?
It's crazy that you mention this, because I'm currently working on developing torsos just like this, in the very near future. ...stay tuned.
But mine are going to be scaled up to more life-like proportions....and yes, they will all have closed style vaginal openings and tunnels. The internal structure will be shaped more like a long toung, versus the typical tube like tunnels. This will be one of the key features.
Modular doll system
It's good to hear that somebody finally takes up this topic. As I have mentioned, the idea itself is not entirely new and has been being expressed for years and, as I know, no manufacturer has actually implemented it.
Probably the best way would be to use body casts, especially to avoid wrong LHP.
Things to look out for when using body casts:
The body casts themselves and the molds may shrink after drying, depending on the material used.
Covered areas of the skin could stick together. A manual post-processing can lead to better results.
What material do you want to use to keep the openings closed, some sort of rubber material?
There are already manufacturers who use scans of the internal structure instead of these fantasy structures.
Other questions would be:
What material is used (will it be compatible with latex or silicone) and is the paint protected when cleaning with water and soap?
Will you build and design your own arms and legs?
How are the arms and legs constructed (will they have joints, hands and feet)?
How is the internal skeleton constructed?
Is a moving hip planned?
What do you think of the idea of offering universal connectors, i.e. that other manufacturers could also offer compatible heads, arms and legs (you would also have to provide something like color codes for the skin).
How heavy is it going to be?
Is there already a online product site?
