Faun Build at Reverend Jacks

RevJack · Post by **RevJack** » Sun Sep 11, 2022 7:51 pm

While working diligently on my Centaur build, I ran into some roadblocks and have shifted gears to build a Satyr/Faun.
Pointy ears, big boobs, goat legs and retaining all sexual functionality!

Starting off with a WM 138 D (I think that's what she is), a WM Vampire head (love the ears), and extra skeleton parts.

: WM 138D I think.; 20220911_162233 (1).jpg (972.71 KiB) Viewed 1202 times

So the plan is to un bolt her ankle, and attach a new shin to the exposed joint. This will result in the longer ankle to toe of goats and dog legs.
I need to modify an ankle/foot assembly to support a custom made goat/deer hoof.
I'm still on the fence on goat horns vs antlers, and how far up the furry legs go. I like the mid-thigh fur look, but the fur-to-the-waist is pretty common.
Since sexy is a real goal, I'm leaning towards antlers and mid-thigh-down fur.
So here is the leg concept:

: Skeleton for reference.; 20220911_153336 (1).jpg (1.36 MiB) Viewed 1202 times

: Leg Concept; 20220911_153330 (1).jpg (1.14 MiB) Viewed 1202 times

So let's get started:
OFF WITH HER FEET!
Cut around the ankle and peel them off.

: Poor little feet; 20220911_162701.jpg (2.99 MiB) Viewed 1202 times

: Peel em like bananas; 20220911_164117.jpg (2.66 MiB) Viewed 1202 times

: Nice sturdy ankles and feet; 20220911_164517.jpg (2.6 MiB) Viewed 1202 times

Any foot fetishists out there?

: Cute little feet; 20220911_164523.jpg (2.7 MiB) Viewed 1184 times

OK, so why does she have two different ankles?

: Hugh?; 20220911_171404.jpg (3.18 MiB) Viewed 1184 times

: One of these things is not like the other...; 20220911_171418.jpg (3.38 MiB) Viewed 1184 times

: One of these things is not like the other...; 20220911_171436.jpg (3.33 MiB) Viewed 1184 times

true_blue22 · Post by **true_blue22** » Sun Sep 11, 2022 7:57 pm

Good stuff, RevJack! It's fascinating to see the skeleton revealed from beneath the TPE.

seagull · Post by **seagull** » Sun Sep 11, 2022 11:09 pm

Why is one these things not exactly like the other?

Welcome to the world of hand assembled skeletons Rev
Most Aussies can relate to this with "Ahh, she'll be right mate"

-Ragnar66- · Post by **-Ragnar66-** » Tue Sep 13, 2022 2:42 am

Subscribed

RevJack · Post by **RevJack** » Tue Sep 13, 2022 5:48 pm

BREAK IN FAUN BUILD WHILE I FIX THE FUCKING TPE PLUGS IN THIS DOLL.....

Her Vag had a plug, but it was neither tight nor sealed. Her anus had the hole for the threaded rod that my endoscope actually FIT THROUGH so I could check the back joint for rust.

: Plug LOOKS secure...; 20220911172701351 (1).jpg (116.72 KiB) Viewed 1102 times

: But it's really not. Just loosely sitting there.; 20220911173807145 (1).jpg (143.66 KiB) Viewed 1102 times

: Now that's an ass HOLE, complete with a glint of skeleton.; 20220911180939291 (2).jpg (74.8 KiB) Viewed 1102 times

Skipping over the sealing stuff because I'll make a thread specifically for it, lets fast forward to two SEALED orifices...

: Sealed Cootchie.; 20220913002543074.jpg (187.17 KiB) Viewed 1102 times

: Sealed Back Door.; 20220913004835959.jpg (127.38 KiB) Viewed 1102 times

Whew! We now return you to your regularly scheduled Faun Build.

RevJack · Post by **RevJack** » Tue Sep 13, 2022 6:14 pm

So the plan is to unbolt her Feet, leaving the exposed open ankle bracket that is welded to the lower shin.

: Remove the bolt holding feet to ankles.; 20220911_171404.jpg (3.18 MiB) Viewed 1097 times

Then I remove the bolts from my extra legs at "A" and "B" below, and attach the thigh eye bolt at "A" to her lower shin bracket. Then I re-attached her foot plate (or a modified foot plate that looks like a hoof "C" onto lower donor thigh bracket "B".
Officially making the donor thigh bone (from "A" to "B" her new foot bone and the Hoof "C" her toes.

: Use the donor thigh as the extended foot, with Hoof toes.; 20220913_175012.jpg (3.95 MiB) Viewed 1097 times

I need a new carbide bit for my dremmel, the last spine fix tore my old one up. Off to Lowes!

Reverend Jack

YungSynth · Post by **YungSynth** » Wed Sep 14, 2022 8:45 am

Very interesting

Good luck

ZombieWinter · Post by **ZombieWinter** » Wed Sep 14, 2022 8:59 am

Go with deer antlers!

RevJack · Post by **RevJack** » Wed Sep 14, 2022 9:21 am

: 20220914_093057.jpg (2.93 MiB) Viewed 1065 times

ZombieWinter wrote: ↑Wed Sep 14, 2022 8:59 am Go with deer antlers!

ZW,
I'm leaning that way myself.
You have thoughts on hooves?
1) I can try to find actual hooves, cow maybe. Pet store maybe. And fill them with epoxy/resin, embedding the foot plate.
2) buy a 4inch diameter Dowell, cut 3 inches off (so it stands like a birthday cake), cut a pie slice out of it for the toe split, paint it gloss black.
What other options?

ZombieWinter · Post by **ZombieWinter** » Wed Sep 14, 2022 3:28 pm

RevJack wrote: ↑Wed Sep 14, 2022 9:21 am 20220914_093057.jpg
ZombieWinter wrote: ↑Wed Sep 14, 2022 8:59 am Go with deer antlers!
ZW,
I'm leaning that way myself.
You have thoughts on hooves?
1) I can try to find actual hooves, cow maybe. Pet store maybe. And fill them with epoxy/resin, embedding the foot plate.
2) buy a 4inch diameter Dowell, cut 3 inches off (so it stands like a birthday cake), cut a pie slice out of it for the toe split, paint it gloss black.
What other options?

There's going to be alot of stress on the hooves. <area + >weight

Real (dried) hooves might be too brittle even when filled with epoxy.

A wooden dowell might also fail after cutting the split.

Best bet might be to use a resin: https://project-nerd.com/2016/02/22/mak ... en-hooves/

seagull · Post by **seagull** » Wed Sep 14, 2022 7:37 pm

Have a memory (vague) of muesky6969 doing something similar to feet

Dominique-n-Splash · Post by **Dominique-n-Splash** » Wed Sep 14, 2022 11:23 pm

So Reverend Jack, Not being cannibalistic or anything. Uh, er, what are you thinking of doing with those poor little feet? I could use some poor little feet and a calf maybe. Best, Dominique

RevJack · Post by **RevJack** » Sun Sep 18, 2022 4:49 am

Alright, it's time to get to grinding! All the nuts were welded, as were half the bolt heads. Half of the bolt/nut pairs I needed to unbolt broke under a pair of wrenches and the might of the The Lord. The other half needed the attentions of Saint Dremmel to succumb.
So when the ankles and the doner thighs were all free of bondage, a test fitting indicated that those cure little joint mobility blocks had to go as well. St. Dremmel to the rescue again.

: My new favorite cut off wheel.; 20220917_135017.jpg (2.96 MiB) Viewed 974 times

So let's attach our doner thighs to her original ankles, and test fit her feet to the doner thighs and...

: Test fitting.; 20220917_153519.jpg (2.06 MiB) Viewed 974 times

YES, I know there is hardware protruding from her naughty bits. I was multitasking the build with testing a Coeros cootchie-cleaning machine. I'll post that later.
So trip to the hardware store for new nuts n bolts n split /lock washers. All the normal slippery washers got tossed in the parts bin and I shoved as many lock washers into those joints as I could fit.

: Split washers; 20220917_153527.jpg (2.31 MiB) Viewed 974 times

: split washers; 20220917_153535.jpg (2.25 MiB) Viewed 974 times

Why split washers? Well, all the joints need to be slightly bent, and we know how well dolls stand with bent knees, so I need to get these joints beyond tight to support the weight.
How about a test...

: Still leaning on the table edge.; 20220917_155553.jpg (2.23 MiB) Viewed 974 times

Yeah, I'm leaving out all the cussing and adjusting and standing and catching, and especially every time her left knee collapsed. But the theory has been proven valid.
Let's slap a head on her see what we have!

: Prototype Faun; 20220917_161515.jpg (1.5 MiB) Viewed 974 times

Coming along fameously! I need to tighten the knees, figure out hooves, and foam and fur the legs. Then con the wife into doing makeup and clothes!
This has been a great build. There is no way she can reliably stand without support so since she will be joining me on Halloween, I need to rig a solid stand assist for her.

Getting closer!