Page 27 of 28
Re: WM DOLLS - Answers and suggestions
Posted: Tue Feb 06, 2024 7:39 pm
by terabyte
Duke777Atriedes wrote: ↑Tue Jan 17, 2023 1:54 pm
I have a suggestion! One that I am particularly passionate about and I'm going to be honest...very frustrated with WM about...MAKE THE TAN SKIN DARKER!!!!!!!!!!!!
I understand that it is impossible to get the same level of tan consistent every time but I was holding up the head of my doll which is supposed to be "tan" and it was laughably light skinned. This has been going on for about a year with all the products I order from WM. I have been ordering tan skin for 7 years and it NEVER was this light. Someone needs to show WM DOLL what tan means...SERIOUSLY.
This is my #1 request, along with consistent skin tones. I've gotten 4 different shades of tan over the last 3 yrs. My latest doll was ordered in tan and definitely looks light tan/medium. I have zero clue how TPE skin tones are made but I have thinking someone could make a scannable color (Like paint) that keeps these skin tones the same over the years.
Re: WM DOLLS - Answers and suggestions
Posted: Fri Feb 16, 2024 3:20 pm
by Digginthemdollz
With the creation of STPE I am ready to try another full size doll. I've settled on the original WM160B.
She has all the features I want ( not sure if offered with non bolt standing feet as it's tpe) but the durability factor was the only way I'd get a doll this weight. After much research I've seen many complaints about this dolls LHP. My question is has the factory made any adjustments to this mold in light of such complaints?
Re: WM DOLLS - Answers and suggestions
Posted: Tue Feb 20, 2024 11:56 pm
by mebaru
I saw a thread on the WMDOLL forum about lightweight dolls with foam cores.
However, I could not find such an item on the WMDOLL website.
Is there really a real option for lightweighting?
Re: WM DOLLS - Answers and suggestions
Posted: Mon Mar 25, 2024 2:35 am
by WM dolls
Digginthemdollz wrote: ↑Fri Feb 16, 2024 3:20 pm
With the creation of STPE I am ready to try another full size doll. I've settled on the original WM160B.
She has all the features I want ( not sure if offered with non bolt standing feet as it's tpe) but the durability factor was the only way I'd get a doll this weight. After much research I've seen many complaints about this dolls LHP. My question is has the factory made any adjustments to this mold in light of such complaints?
You mentioned that the WM 160B LHP is in the correct position now, not out of place like those old models used to be!
Re: WM DOLLS - Answers and suggestions
Posted: Mon Mar 25, 2024 2:48 am
by WM dolls
mebaru wrote: ↑Tue Feb 20, 2024 11:56 pm
I saw a thread on the WMDOLL forum about lightweight dolls with foam cores.
However, I could not find such an item on the WMDOLL website.
Is there really a real option for lightweighting?
Currently, only silicone products are made with foam cores to reduce weight.
Our silicone products are generally 3-5kgs lighter than those made in other factories.
Re: WM DOLLS - Answers and suggestions
Posted: Mon Mar 25, 2024 7:02 pm
by Digginthemdollz
WM dolls wrote: ↑Mon Mar 25, 2024 2:35 am
Digginthemdollz wrote: ↑Fri Feb 16, 2024 3:20 pm
With the creation of STPE I am ready to try another full size doll. I've settled on the original WM160B.
She has all the features I want ( not sure if offered with non bolt standing feet as it's tpe) but the durability factor was the only way I'd get a doll this weight. After much research I've seen many complaints about this dolls LHP. My question is has the factory made any adjustments to this mold in light of such complaints?
You mentioned that the WM 160B LHP is in the correct position now, not out of place like those old models used to be!
To clarify... there are two completely different molds.
Wm160B original
Wm160B new
Are you saying you have corrected wm160b original mold?
Because that's what I'm asking & looking for.
Re: WM DOLLS - Answers and suggestions
Posted: Mon Mar 25, 2024 11:46 pm
by WM dolls
Digginthemdollz wrote: ↑Mon Mar 25, 2024 7:02 pm
WM dolls wrote: ↑Mon Mar 25, 2024 2:35 am
Digginthemdollz wrote: ↑Fri Feb 16, 2024 3:20 pm
With the creation of STPE I am ready to try another full size doll. I've settled on the original WM160B.
She has all the features I want ( not sure if offered with non bolt standing feet as it's tpe) but the durability factor was the only way I'd get a doll this weight. After much research I've seen many complaints about this dolls LHP. My question is has the factory made any adjustments to this mold in light of such complaints?
You mentioned that the WM 160B LHP is in the correct position now, not out of place like those old models used to be!
To clarify... there are two completely different molds.
Wm160B original
Wm160B new
Are you saying you have corrected wm160b original mold?
Because that's what I'm asking & looking for.
To avoid any misunderstanding in our communication, could you please send us the pictures of your original WM160B doll.
We will confirm it again.
Re: WM DOLLS - Answers and suggestions
Posted: Tue Mar 26, 2024 2:31 pm
by Digginthemdollz
WM dolls wrote: ↑Mon Mar 25, 2024 11:46 pm
Digginthemdollz wrote: ↑Mon Mar 25, 2024 7:02 pm
WM dolls wrote: ↑Mon Mar 25, 2024 2:35 am
Digginthemdollz wrote: ↑Fri Feb 16, 2024 3:20 pm
With the creation of STPE I am ready to try another full size doll. I've settled on the original WM160B.
She has all the features I want ( not sure if offered with non bolt standing feet as it's tpe) but the durability factor was the only way I'd get a doll this weight. After much research I've seen many complaints about this dolls LHP. My question is has the factory made any adjustments to this mold in light of such complaints?
You mentioned that the WM 160B LHP is in the correct position now, not out of place like those old models used to be!
To clarify... there are two completely different molds.
Wm160B original
Wm160B new
Are you saying you have corrected wm160b original mold?
Because that's what I'm asking & looking for.
To avoid any misunderstanding in our communication, could you please send us the pictures of your original WM160B doll.
We will confirm it again.
Re: WM DOLLS - Answers and suggestions
Posted: Tue Mar 26, 2024 11:02 pm
by WM dolls
Digginthemdollz wrote: ↑Tue Mar 26, 2024 2:31 pm
WM dolls wrote: ↑Mon Mar 25, 2024 11:46 pm
Digginthemdollz wrote: ↑Mon Mar 25, 2024 7:02 pm
WM dolls wrote: ↑Mon Mar 25, 2024 2:35 am
Digginthemdollz wrote: ↑Fri Feb 16, 2024 3:20 pm
With the creation of STPE I am ready to try another full size doll. I've settled on the original WM160B.
She has all the features I want ( not sure if offered with non bolt standing feet as it's tpe) but the durability factor was the only way I'd get a doll this weight. After much research I've seen many complaints about this dolls LHP. My question is has the factory made any adjustments to this mold in light of such complaints?
You mentioned that the WM 160B LHP is in the correct position now, not out of place like those old models used to be!
To clarify... there are two completely different molds.
Wm160B original
Wm160B new
Are you saying you have corrected wm160b original mold?
Because that's what I'm asking & looking for.
To avoid any misunderstanding in our communication, could you please send us the pictures of your original WM160B doll.
We will confirm it again.
You are right. This is a very old style, we have adjusted the mold.
When you order, please note 160B latest mold (repaired LPH position).
Re: WM DOLLS - Answers and suggestions
Posted: Wed Mar 27, 2024 2:46 am
by Digginthemdollz
WM dolls wrote: ↑Tue Mar 26, 2024 11:02 pm
Digginthemdollz wrote: ↑Tue Mar 26, 2024 2:31 pm
WM dolls wrote: ↑Mon Mar 25, 2024 11:46 pm
Digginthemdollz wrote: ↑Mon Mar 25, 2024 7:02 pm
WM dolls wrote: ↑Mon Mar 25, 2024 2:35 am
Digginthemdollz wrote: ↑Fri Feb 16, 2024 3:20 pm
With the creation of STPE I am ready to try another full size doll. I've settled on the original WM160B.
She has all the features I want ( not sure if offered with non bolt standing feet as it's tpe) but the durability factor was the only way I'd get a doll this weight. After much research I've seen many complaints about this dolls LHP. My question is has the factory made any adjustments to this mold in light of such complaints?
You mentioned that the WM 160B LHP is in the correct position now, not out of place like those old models used to be!
To clarify... there are two completely different molds.
Wm160B original
Wm160B new
Are you saying you have corrected wm160b original mold?
Because that's what I'm asking & looking for.
To avoid any misunderstanding in our communication, could you please send us the pictures of your original WM160B doll.
We will confirm it again.
You are right. This is a very old style, we have adjusted the mold.
When you order, please note 160B latest mold (repaired LPH position).
I like the old mold. Not a fan of the new one even though it is very nice. Suggesting an upgrade for old mold. Please consider this when selecting older molds to upgrade.
Thank you.
Re: WM DOLLS - Answers and suggestions
Posted: Wed Mar 27, 2024 3:33 am
by WM dolls
Digginthemdollz wrote: ↑Wed Mar 27, 2024 2:46 am
WM dolls wrote: ↑Tue Mar 26, 2024 11:02 pm
Digginthemdollz wrote: ↑Tue Mar 26, 2024 2:31 pm
WM dolls wrote: ↑Mon Mar 25, 2024 11:46 pm
Digginthemdollz wrote: ↑Mon Mar 25, 2024 7:02 pm
WM dolls wrote: ↑Mon Mar 25, 2024 2:35 am
You mentioned that the WM 160B LHP is in the correct position now, not out of place like those old models used to be!
To clarify... there are two completely different molds.
Wm160B original
Wm160B new
Are you saying you have corrected wm160b original mold?
Because that's what I'm asking & looking for.
To avoid any misunderstanding in our communication, could you please send us the pictures of your original WM160B doll.
We will confirm it again.
You are right. This is a very old style, we have adjusted the mold.
When you order, please note 160B latest mold (repaired LPH position).
I like the old mold. Not a fan of the new one even though it is very nice. Suggesting an upgrade for old mold. Please consider this when selecting older molds to upgrade.
Thank you.
Yes, we will
Re: WM DOLLS - Answers and suggestions
Posted: Wed Mar 27, 2024 6:57 am
by JoVoxx
WM 156B and WM 163H with updated LHP would be cool.
Re: WM DOLLS - Answers and suggestions
Posted: Wed Apr 10, 2024 10:25 pm
by barbie lover JMH
Hi WM Dolls. Maybe I am going to miss this but is there any possibility to offer the 100cm d-cup dolls a pubic hair option? I think adding a full bush to the vulva would make for a great addition for those of us that want it. Also, I like the idea one of the posters above posted about having the head fixed to the neck possibly. I am thrilled with your new Super TPE option and have ordered the 100cm doll in this new skin but would love the option to add pubic hair once again. Also, could we get a smaller wig for the head and maybe a blonde with bangs as an option if this is doable? Thanks for your wonderful work.
Re: WM DOLLS - Answers and suggestions
Posted: Sun Apr 14, 2024 9:35 am
by Big_Easy
Hi WMDolls, can you tell me if the JK dolls are made with STPE by default? My new JK doll feels so soft. She is very nice compared to my other TPE doll.
I think the JK doll is STPE but I don’t find it noted on JK website anywhere.
Thank you
