Selene Supreme Goddess

[drguild]

Looked again the insert has been rubbing on the cable for the egg and the side edge of the hole and a small cut to the insert has occurred on one side to the actual insert developed not really affecting the insert in a major way also a few moderate chaffing marks on the sides insert as a result of the cable so at some stage Ill need a new insert that actually looks natural and fits so any ideas on types of aftermarket inserts that would work?

The round smooth hole caps are totally pathetic they don't stay as I found the vag one pushed inside and trying to realign it again the hole is too big for the cap and the anus on the outside I'm sure that has been the same all of you so what solutions have you used to solve it was thinking tape or some putty thing if that works and anyone knows what to get for this material? but getting a insert could change that.

I took everything out and laid it on the bed and have pics of all the insides as one and the body as another and Ill upload those to the doll gallery once I get approved.

I also looked at stuffing her and decided to take out and fluff up the stuffing from my old Sky doll which is a shame as now its not worth putting it back in ans she isn't repairable so I guess you can say I decommissioned her service tonight but I got the Selene doll to cuddle her all day and she will live on as parts and remaining vinyl used in modifications I hope.

With the stuffing I just did the torso for now and and she feels slightly better now also has a more pronounced chest or it could be my imagination I just filled the inside with stuffing not in the inflatable chambers but will probably redo it.

knighthawk how did you stuff the bottom of the feet and the fingers etc as trying by hand I cant reach that far and the stuffing just stays the furthest I can reach, I was thinking of if wire would work but I don't have wire here.

Read more of this thread again and have more ideas so I guess instead of being scared of stuffing up I should get inspired first and vision and think about things and then plan from there.

I really really want to change the insert either position or get something that works and looks natural nut don't about those things too much ddr's rope system seems cool but way too complex.

I probably come across to some as someone dumb who is wanting to so this and has no experience and is likely to stuff it up or ask questions on every single thing from the way I post that may be true in some way as I'm pretty inexperienced on modding, engineering and innovating and working out solutions to modding things and as such may not really know what I'm doing unless I have a clear path and goal but I am determined to at least give it a shot and have made some notes from this thread and I'm planning and talking first and have some ideas just not the methods of carrying them out.
As long as I know what glues, materials to use and methods that are commonly accepted Ill try to do my best.

I have more thought to a separate thread dunno if its worth it with traffic if I'd have enough reading and replying back to me there and I'm already posting here as well I want to interact with people with the doll and there journeys also.

edit: I think I found ddr under a different name and samurai on the uk doll forum with there mods so regged incase there are other pics of there mods as well as knowledge seems these forums is alittle show unless its a mainstream or popular doll like the poupee general talk or a higher end doll but thanks knitehawk for constantly replying much appreciated to know someone is here.

[drguild]

Have a doll gallery now with more pics of some stuff showing my stuffing and the full exploded view of Selene inside and out I won't show here.

As last Post I decommissioned Sky but all is not lost her head fits nicely on the Selene doll may need to be trimmed on the neck to match and color is a little lighter but kinda close and the head is softer.

For anyone thinking of taking a blowup in the shower don't unless you proper watertight the head I was lucky when I first got the sky doll to not get mold or anything and a warm water wipe inside with a paper towel and dry cleaned anything up there that could have resaulted, my first dolls head wasn't soo lucky so that head is kinda wrecked as it is and isn't the right size so I'm having to get rid of it at last.

Images are links to the full size pics in the gallery.



A shot of the 2 before I took Sky apart.



I have ordered a hobby knife set, some green dolls eyes the same ones that one person on UK doll forum used, 3 wigs I really should have got brunet etc but can do that later.

Will be looking at inserts can anyone recommend me a type?
The soft nipples of Sky seem to be a perfect match little scared about doing it so I won't to start with.
I'll look at makeup etc also when the wigs come for both heads.

Took the torso stuffing out last night the material is pretty soft with nothing in it but doesn't hold shape too well.

Update: Worked out why The insert is tight etc, I'm too big the hole protector I said that was small and wasn't filling cut the hole and going inside is too small for me when the protector is over the insert as I was pushing it instead of going through.

Only way I can make this work is mby modification of the insert and use a different style hole protector that's bigger as the hole may be ok but the hole cover isn't.

So if you are a normal size person this doll won't work with the hole protector cover.

[knighthawk]

Looked again the insert has been rubbing on the cable for the egg and the side edge of the hole and a small cut to the insert has occurred on one side to the actual insert developed not really affecting the insert in a major way also a few moderate chaffing marks on the sides insert as a result of the cable so at some stage Ill need a new insert that actually looks natural and fits so any ideas on types of aftermarket inserts that would work?
Cable for the egg? I assume you mean a vibrating bullet? Not used one with Selene, just the Fleshlight vibro version...
Yes my experience with Fleshlight in the doll means damage to the sides probably from leg socket edges, especially when rotating the legs.. Fleshlight is too wide but its nice sensation, when it gets too damaged, I just get another... although if you like visual only, insert one and without use it will probably last a long time. As for looks natural, depends on your preference, Fleshlights molded on pornstars etc, otherwise try Meiki stuff?
http://www.toydemon.com/search.php?mode ... er_page=80

The round smooth hole caps are totally pathetic they don't stay as I found the vag one pushed inside and trying to realign it again the hole is too big for the cap and the anus on the outside I'm sure that has been the same all of you so what solutions have you used to solve it was thinking tape or some putty thing if that works and anyone knows what to get for this material? but getting a insert could change that.
Don't really understand what you mean by hole cap?

I took everything out and laid it on the bed and have pics of all the insides as one and the body as another and Ill upload those to the doll gallery once I get approved.
Your model has the leg lock rings, which mine doesn't, so can't comment on their effectiveness

I also looked at stuffing her and decided to take out and fluff up the stuffing from my old Sky doll which is a shame as now its not worth putting it back in ans she isn't repairable so I guess you can say I decommissioned her service tonight but I got the Selene doll to cuddle her all day and she will live on as parts and remaining vinyl used in modifications I hope.

With the stuffing I just did the torso for now and and she feels slightly better now also has a more pronounced chest or it could be my imagination I just filled the inside with stuffing not in the inflatable chambers but will probably redo it.
Yes, stuffing Selene improved her chest size, or like you, could be my imagination... when I get a tape I will compare my 2 Selenes and let you know

knighthawk how did you stuff the bottom of the feet and the fingers etc as trying by hand I cant reach that far and the stuffing just stays the furthest I can reach, I was thinking of if wire would work but I don't have wire here.
Well, going to buy some more foam and finish the other leg tomorrow.. I will take some pics of the process, and post them to Selina's album. Will start another thread on stuffing, as its a whole other subject

Read more of this thread again and have more ideas so I guess instead of being scared of stuffing up I should get inspired first and vision and think about things and then plan from there.

I really really want to change the insert either position or get something that works and looks natural nut don't about those things too much ddr's rope system seems cool but way too complex.

I probably come across to some as someone dumb who is wanting to so this and has no experience and is likely to stuff it up or ask questions on every single thing from the way I post that may be true in some way as I'm pretty inexperienced on modding, engineering and innovating and working out solutions to modding things and as such may not really know what I'm doing unless I have a clear path and goal but I am determined to at least give it a shot and have made some notes from this thread and I'm planning and talking first and have some ideas just not the methods of carrying them out.
As long as I know what glues, materials to use and methods that are commonly accepted Ill try to do my best.
Your not dumb, best way to find out is to try and learn as you go.. thats how I do it. I guess the main thing I would NOT do is cut up the plastic outer shell, as this will ruin the structure. You can always paint, cover, dress over problems, re-stuff her, or whatever, so long as the basic form is the same.

I have more thought to a separate thread dunno if its worth it with traffic if I'd have enough reading and replying back to me there and I'm already posting here as well I want to interact with people with the doll and there journeys also.

edit: I think I found ddr under a different name and samurai on the uk doll forum with there mods so regged incase there are other pics of there mods as well as knowledge seems these forums is alittle show unless its a mainstream or popular doll like the poupee general talk or a higher end doll but thanks knitehawk for constantly replying much appreciated to know someone is here.
No problem... I am in the modding learning experience as well, love the Selene doll despite the flaws

[knighthawk]

[quote="drguild"

Took the torso stuffing out last night the material is pretty soft with nothing in it but doesn't hold shape too well.

Update: Worked out why The insert is tight etc, I'm too big the hole protector I said that was small and wasn't filling cut the hole and going inside is too small for me when the protector is over the insert as I was pushing it instead of going through.
Sorry, don't follow what you mean by hole protector? I guess new Selene has additions to the original... maybe take some pictures?
Only way I can make this work is mby modification of the insert and use a different style hole protector that's bigger as the hole may be ok but the hole cover isn't.

So if you are a normal size person this doll won't work with the hole protector cover.[/quote]

[drguild]

Have taken a pic of the insert with the caps still attached.



I don't really know what to do as without these caps the hole in the torso has a kinda sharp edge to it.

I'm thinking and I may have seen before that you can get edge molding for holes not 1 edge sided but ones that work with this level of thickness etc that you cut to size and will go round.

This should work if I know what the stuff is again.

Or duct tape I the meantime to take the sharp edge off.

Ill try the insert again without those restricting cap rings and see what happens.

Thanks for the words not planning anything to really damage her structure like I saw people do on other forums as I want to avoid that path where possible.

Shes the one with fixed shoes and without a a/b number may be a minor revision.

Yea I meant the bullet also known as egg toy from what I've read.

There nice and reasonable priced insets so may end up getting one at some stage but want to secure the sharp edges on the hole first as I cant use the protection caps.

I don't even know why the protection caps are too small for the cut hole in the first place.

The lock rings I don't know will play around with them and see what I can gather probably keep using them with the stuffing.

Was thinking how hard a wire-frame mod would be I know many people have done that to dolls inflates etc and would love someone to share a how-to, like you mentioned with the stuffing it may be better in a separate thread to ask for a tut as it would benefit everyone then and more dolls.

[knighthawk]

Seems stuffed and non stuffed Selene's about the same... pretty rigid outer shell
34-20-35 is what I got, but not sure exactly where to measure
Those caps and lock rings seem like an attempt to fix bad design.. which they wont... perhaps the doll could be taller so that things dont have to be so close together, like leg joints and insert holes... if you make the holes bigger it wont help much, and vag insert hole is in the right place it seems to me

[drguild]

Seems stuffed and non stuffed Selene's about the same... pretty rigid outer shell
34-20-35 is what I got, but not sure exactly where to measure
Those caps and lock rings seem like an attempt to fix bad design.. which they wont... perhaps the doll could be taller so that things dont have to be so close together, like leg joints and insert holes... if you make the holes bigger it wont help much, and vag insert hole is in the right place it seems to me

The caps are stupid for sure why put them on if there too small for a normal westerners persons width.

I tried a few things last night the insert in the doll with duct tape round the whole, alone out the doll and even just to see if I'd fit in the hole without the insert.

I only tried the vag hole and it was allot better without those rings but I couldn't go all in and the torso hole was slightly annoying with its location for me still and having her ontop even in a empty state the insert was coming out and ontop it just would now work due to that and It was alittle tight.

She may have been better filled testing but cant do that with the air chambers.

So I next tried the insert outside by hand which ended up with it tight still and the small hole in the side I mentioned I kept popping out there and it wasn't really doing me anything.

So I tried just a check to see if I'd actually fit the torso vag hole which ended up that I can could fit but all the way in there wasn't going to be much room for the insert around me so dunno what to do here.

I know I wasn't going to do anything myself having done earlier in the day but I wanted just to check things.

Because of removing the insert and checking the structural integrate at the bottom isn't there and as such one of the leg plastic ring thingy s on the outside that are glued one snapped in just a minor snap Ill grab a pic later of it but I presume superglue will fix that as that plastic ring has a few dents and chunks missing in areas due to manufacturing unless anyone has any ideas?.

So re-enforcing or padding the bottom of the torso will be on my list also to do.

As for the movements I'm thinking Vaseline would would to free them up but not looking to play around atm with that.

The leg rings I had a good look and the mold for the O seems to bow out in each at the same place so dunno what to do about that.

After last night I'm disappointed about the quality and the fact that I seem to abit big for this Selene. I hope those meiki inserts handle a more than what these default inserts think size should be I may email the company and ask sometime.

And yea I don't know whats good and whats not as I never experienced the real thing and just had a sleeve insert and the Sky double one which seems softer but that's probably use doing that.

To me and the price it should have been designed better part of me feels not good when I could have saved for a entry level silicon which might have been better and hopefully better but I cant change that decision now.
This girl was growing on me but it's dropped down a bit with that after this but I will try to see what I can do.

I will save for a entry silicon though with wireframe and when I do I'll check on inserts and I hope I can improve and fix the flaws in this one in the meantime.

Edit: tried again fresh and ready stuffing the torso etc it was better than last night but didn't work out again as the holes on the torso are too small and restricting and insert is too tight to be of any comfort so that will need a reasonable modification it seems.

I emailed a guy on a local marketplace on the onaholes as there cheaper than that site with shipping so lets see what he comes back with.

I think I'll work on getting a onahole that works and is nice and comfortable for me then see about modding it in rather than trying to get the stock one to work.

Too bad Ill just be restricted to frontal stuff but that's not really a issue when I find something that works for me.

Update 2: actually measured with my Sky worn in insert over and comfortably its 5 1/2cm cross section width and the holes are about 4.5cm cross section which means I need to increase them by 1cm at least but I will wait till I get a japanese onahole and measure after a hand-job with it.

Very disappointed that most of these are built too small.

[drguild]

Not much between last update and this one, been looking at getting my own silicon doll and thinking what to do with Selene etc I really should give her a proper name then the stock name.

My dolls eyes came today there half round and the wigs apparently but dam postman didn't come up to the unit he just left a note in the letterbox as I was up sitting at my pc as I had inspection today so I'll get the wigs tomorrow.

I tested the dolls eyes on the sky head with just duct tape backing, how I'm going to mount them in the Selene head I don't know, ideas would be appreciated.

I'll use the skyhead as my test work on head and have shaved it since this post was originally made.

I chucked my first dolls head out the other day due to mold etc never occurred to me to save the eyes as they are similar type of eyes but in hazel. No chance getting it out of the communal bins now with all the extra stuff in there.

[drguild]

Got the wigs there synthetic party wigs so pretty low quality but dam they make a massive difference.

Here is my what I have renamed test head from the sky doll.

Eyes duct taped in place and the new wig OMG soo sexy as soon as the put the wig on I was saying hello the pic doesn't do the look any justice as its soo much better in person with viewing angles and actual depth etc. Update: added a pic to my album which is as close as I can shoot to the look I'm seeing myself. Feel free to comment in the album guys on pics.


Changed my camera settings to F2.8 on the 5mm mkII using the 580EXII makes a big difference in photographing stuff.

All the project head needs is some different makeup applied and dam it would soo good.

So those people with the sky vinyls whether mitted or molded hands feet should definitely change the look without fail as soon as you can as the stock look is too young looking and not as pretty as a custom look.

Had a quick look with the wig on the Selene doll with her hair tied back I'm apprehensive about making the change but from what I saw its very sexy on her also but I could always get a wig to represent the original hair I presume.

Uploaded photos of the Selene doll in all 3 wigs her hair is still there and attached but hidden let me know what looks the best for you out of the 3

I would love to waterproof the Selene dolls head but no idea how id go about doing that anyone done this with a doll?

The wig is not soo sexy on me though

[knighthawk]

Just browsing and came across this doll;

http://www.kanojotoys.com/yuka-embrace-p-654.html

[drguild]

Saw those before the yuka embrace.

I repaired I hope that snap on the leg ring thing with allot of superglue I had to do it multiple times as it kept snapping over and over so I just went nuts with the superglue this morning and seems to be holding up this time, I just need to be careful now and if it happens again I may have to fuse the 2 together with some plastic and carefully melting it between the join with a soldering iron.

I also fully stuffed here using a pole you use to pull curtains down etc with that was here and she is heavy now which I like.

She is pretty cuddly also stuffed still firm I guess Ive gotten used to her firmness and softened the pvc shell up material up abit since I got her.

The red wig I got was really doing it for me switched the black as shew is in black underwear atm and that's nice also.

She has a little staining already around her panty line and on her arms anyone recommend anything to help remove it?

Next I'm going to look at the head I think with the eyes while I would love a holder for them so there movable I don't know how with half round so may just superglue them on.

Every-time I'm out looking at girls etc I'm always thinking of there cloths and styles I want to get for her and the silicon I want to get.

From everything nightgowns to clubbing dresses, pajamas etc even those sleeveless shirts.

[GFELube]

I vote for the red hair; looks the most natural on her:

[come2menow]

Hi.
For US residents that might be interested, I can offer Selene and ship it to USA:
immediate shipping: model 2D1670B (clothing. fixed shoes) - for $320
upon order (6, 7 days)
basic model 2D1670: $270
model 2d1670A (clothing, detachable shoes): $380

About the shipping:
Doll comes standing up in huge box (60x20x11 inch) and that makes shipping ridiculously expensive:
ups $683!!!! , the cheapest I found Polamer: $191
However, if one don't care about the original box, the doll can be shipped in smaller box with arms and legs detached which makes it possible to use postal service (original box too big) and cuts down the shipping cost significantly:
postal service regular: $56
postal service express: $145

The doll comes with cartoon stand that helps it keep the stand up position. This stand can be unfolded easy and sent along with the doll in smaller box.

[knighthawk]

Hi.
For US residents that might be interested, I can offer Selene and ship it to USA:
immediate shipping: model 2D1670B (clothing. fixed shoes) - for $320
upon order (6, 7 days)
basic model 2D1670: $270
model 2d1670A (clothing, detachable shoes): $380

About the shipping:
Doll comes standing up in huge box (60x20x11 inch) and that makes shipping ridiculously expensive:
ups $683!!!! , the cheapest I found Polamer: $191
However, if one don't care about the original box, the doll can be shipped in smaller box with arms and legs detached which makes it possible to use postal service (original box too big) and cuts down the shipping cost significantly:
postal service regular: $56
postal service express: $145

The doll comes with cartoon stand that helps it keep the stand up position. This stand can be unfolded easy and sent along with the doll in smaller box.

What currency are you quoting and where are you shipping from?

[come2menow]

Hi.
For US residents that might be interested, ..........................................and cuts down the shipping cost significantly:
postal service regular: $56
postal service express: $145

The doll comes with cartoon stand that helps it keep the stand up position. This stand can be unfolded easy and sent along with the doll in smaller box.

What currency are you quoting and where are you shipping from?

I thought that $ - sign says it all But to confirm: I mean American Dollars
Shipping from Europe in general. This particular doll would be shipped from Poland