Sewing (machine) thread
- Siliconeman
- Doll Elder
- Posts: 3166
- Joined: Mon Nov 23, 2015 11:18 pm
- Location: Scandinavia
- Contact:
Sewing (machine) thread
I have found out that many of my dolls have very special body-shapes and it is very difficult to find well fitting garments for them.
For this reason I am thinking that I will have to do some modifications by myself on my doll-clothing.
My question for you doll-people out there is: What sewing machine you are using (if you have one)? What kind of machine would you recommend?
Any sewing tips and tricks which you might be willing to share would be greatly appreciated!
I am total sewing-beginner and need some advice!
Cheers!
Siliconeman
- Jimmy_71
- Doll Patriarch
- Posts: 3852
- Joined: Sun Sep 09, 2018 9:37 am
- Location: Quebec, Canada
- Contact:
Re: Sewing (machine) thread
Karissa (Zelex SLE 172E with head 204)
Karine (WM158D / #273)
MG (WM172G)
Anya (WM172D Gel / #370)
Andrea & Veronica (WM172D Hollow / #370 & #S19 shared body)
Patricia & Tatiana (WM166C / #252 & #266 shared body)
Alyssa & Isabelle (WM158D / #74 & #162 shared body)
Karissa's Thread
Jimmy's WM Babes
Link To Their Old Threads
Link To Their Photo Albums
Link To Their Instagram
Re: Sewing (machine) thread
There are current models, pretty much automatic everything but are quite expensive, no experience with them
In addition to the manual that comes with a new machine there are a number of sites on the net with instructions also
- AtomicPunk
- Moderator
- Posts: 3085
- Joined: Fri Jun 26, 2020 5:54 pm
- Location: Hudson Valley, NY USA
- Contact:
Re: Sewing (machine) thread
Anywhoo, my Mom downgraded to a simple Singer machine as she got older and I now have her machine, as she passed away. A sewing machine seems to be one of those things people forget about when they have kids. I would assume the new generations just toss rather than fix. I'm always fixing my boy's clothes. And yeah, now with Alita I've done a few alterations, mostly waist intakes on a few dresses.
I have to say it's been really cool to see the clothing that scale doll owners have come up with.
Just start with a basic machine. They are more than adequate for alterations and basic clothing. Fancy computer models are for advanced sewing techniques and full blown projects if you are serious and want to save a bit of time. I would recommend Singer, a company that's been around oh, since 1850.
Re: Sewing (machine) thread
Re: Sewing (machine) thread
What price range?
If you only intend to do a little sewing it may be unnecessary to buy a new modern machine with 1000 different stitches you will probably only use 3-4 of them in the end.
The most important seams are straight stitch, zigzag and maybe a specific stretch stitch (overloock seam) and buttonholes. Invisible hem seam may be good if you hem up trousers, but you can do it by hand stitching if you want a hem without visible seam.
Look for a used one There are many good and cheap older machines that after a service or oil change will work great. Old cheap Singer machines you see lots of and they are made of solid metal parts and are made to last, the same with most Bernina. But not Bernina Bernette machines. Some suggestions
Bernina 1008, Very good machine and with a little luck it is possible to find a cheap one (50-100 dollars), then act quickly but make sure it works.
Bernina record, a slightly older machine but for 50 dollars you can not complain.
Janome easy jeans, strong machine that sews through thick fabrics.
There are some suggestions for machines that I myself have used or researched more about when I bought one for my mother as a gift. She got the Bernina Record
Claire: JM New Tree Elf 80cm
Mi-Soo: Starpery 171cm A
Re: Sewing (machine) thread
Re: Sewing (machine) thread
Belive me in a few days I learned to make a skirt for my now exwife many years ago and was fun!
- katiesBoyfriend
- Doll Elder
- Posts: 3028
- Joined: Sun Aug 26, 2012 9:54 pm
- Location: Western spiral arm of the Milky Way galaxy, out near the outskirts of the Laniakea supercluster
- Contact:
Re: Sewing (machine) thread
My late mother trained on a Singer machine similar to that one. She took it with her when she and I left Germany and joined my father in Canada.Tailor wrote:I have several sewing machines including a bernina 215 a juki DDL 900B industrial machine a serger and a coverlock that does not seem to work so well.
What price range?
If you only intend to do a little sewing it may be unnecessary to buy a new modern machine with 1000 different stitches you will probably only use 3-4 of them in the end.
The most important seams are straight stitch, zigzag and maybe a specific stretch stitch (overloock seam) and buttonholes. Invisible hem seam may be good if you hem up trousers, but you can do it by hand stitching if you want a hem without visible seam.
Look for a used one There are many good and cheap older machines that after a service or oil change will work great. Old cheap Singer machines you see lots of and they are made of solid metal parts and are made to last, the same with most Bernina. But not Bernina Bernette machines. Some suggestions
Bernina 1008, Very good machine and with a little luck it is possible to find a cheap one (50-100 dollars), then act quickly but make sure it works.
Bernina record, a slightly older machine but for 50 dollars you can not complain.
Janome easy jeans, strong machine that sews through thick fabrics.
There are some suggestions for machines that I myself have used or researched more about when I bought one for my mother as a gift. She got the Bernina Record
I wanted to keep it after she died but it, along with several other heirlooms, was damaged when the basement flooded a few years ago. There wasn't much left of it and I sold it to someone for scrap.
"The two most common elements in the universe are hydrogen and stupidity." Harlan Ellison
"Dad says that anyone who can't use a slide rule is a cultural illiterate and should not be allowed to vote. Mine is a beauty--a K&E 20-inch Log-log Duplex Decitrig." Robert Heinlein
- katiesBoyfriend
- Doll Elder
- Posts: 3028
- Joined: Sun Aug 26, 2012 9:54 pm
- Location: Western spiral arm of the Milky Way galaxy, out near the outskirts of the Laniakea supercluster
- Contact:
Re: Sewing (machine) thread
My late mother trained on a Singer machine similar to that one. She took it with her when she and I left Germany and joined my father in Canada.Tailor wrote:I have several sewing machines including a bernina 215 a juki DDL 900B industrial machine a serger and a coverlock that does not seem to work so well.
What price range?
If you only intend to do a little sewing it may be unnecessary to buy a new modern machine with 1000 different stitches you will probably only use 3-4 of them in the end.
The most important seams are straight stitch, zigzag and maybe a specific stretch stitch (overloock seam) and buttonholes. Invisible hem seam may be good if you hem up trousers, but you can do it by hand stitching if you want a hem without visible seam.
Look for a used one There are many good and cheap older machines that after a service or oil change will work great. Old cheap Singer machines you see lots of and they are made of solid metal parts and are made to last, the same with most Bernina. But not Bernina Bernette machines. Some suggestions
Bernina 1008, Very good machine and with a little luck it is possible to find a cheap one (50-100 dollars), then act quickly but make sure it works.
Bernina record, a slightly older machine but for 50 dollars you can not complain.
Janome easy jeans, strong machine that sews through thick fabrics.
There are some suggestions for machines that I myself have used or researched more about when I bought one for my mother as a gift. She got the Bernina Record
I wanted to keep it after she died but it, along with several other heirlooms, was damaged when the basement flooded a few years ago. There wasn't much left of it and I sold it to someone for scrap.
"The two most common elements in the universe are hydrogen and stupidity." Harlan Ellison
"Dad says that anyone who can't use a slide rule is a cultural illiterate and should not be allowed to vote. Mine is a beauty--a K&E 20-inch Log-log Duplex Decitrig." Robert Heinlein
- Siliconeman
- Doll Elder
- Posts: 3166
- Joined: Mon Nov 23, 2015 11:18 pm
- Location: Scandinavia
- Contact:
Re: Sewing (machine) thread
Usually stores have either Singer or Brother machines here. Anyone has any comments about Brother? Many recommend simple machine to start with and they are probably correct but as a man I like technology and it would be interesting to test slightly more advanced mid-range machine in maybe 300euro range.
I am not prepared to buy used machine since I know nothing about sewing machines and could not evaluate whether the machine is in good or bad condition.
Cheers!
Sili
- katiesBoyfriend
- Doll Elder
- Posts: 3028
- Joined: Sun Aug 26, 2012 9:54 pm
- Location: Western spiral arm of the Milky Way galaxy, out near the outskirts of the Laniakea supercluster
- Contact:
Re: Sewing (machine) thread
My mother was a fashion designer by trade. When she died a few years, she had 3 Singers (including the one I mentioned earlier) as well as a Pfaff sewing machine and a Pfaff serger. You can't go wrong with either brand. Take a look on sites like eBay as there are often good machines for sale there.Siliconeman wrote:Great answers! Keep them coming. Tailor recommended Bernina, this make seems to be clearly for professionals. The simplest Bernina that I could find (Bernina 325) costs 1000euro when bought new.
Usually stores have either Singer or Brother machines here. Anyone has any comments about Brother? Many recommend simple machine to start with and they are probably correct but as a man I like technology and it would be interesting to test slightly more advanced mid-range machine in maybe 300euro range.
I am not prepared to buy used machine since I know nothing about sewing machines and could not evaluate whether the machine is in good or bad condition.
Cheers!
Sili
"The two most common elements in the universe are hydrogen and stupidity." Harlan Ellison
"Dad says that anyone who can't use a slide rule is a cultural illiterate and should not be allowed to vote. Mine is a beauty--a K&E 20-inch Log-log Duplex Decitrig." Robert Heinlein
-
- Senior Member
- Posts: 240
- Joined: Tue Mar 26, 2019 1:17 pm
- Contact:
Re: Sewing (machine) thread
buy safety pins.
No, really. Then you but a shirt that fits around your lady's bust, and then you learn to alter it with safety pins.
Put the shirt on inside out. Grab the seam and pinch it in tighter. Put a safety pin to keep the material there.
Put in a lot of safety pins. Almost like you are sewing with safety pins.
Then you turn it right side out, put it on your babe, and see what it looks like.
Does it hang right. Does it look right. If not, play with it.
---- -- -- -----
Next is thread and needle. So, you got those safety pins, now follow the points of those pins and do a running stitch.
You are doing what those safety pins did in a much more permanent manner.
(and you get all your safety pins back for the next trial.)
Sewing by hand is not really that hard. And since your doll is not going to be moving around in it, you don't even have to be careful about keeping your stitches even.
Doing this allows you to see how the pieces of fabric go together, and what happens when you move seems.
----- -- ---- -- -- ---
After you have done this a few times, you will stop using safety pins, and start using pins. (they are faster, and you buy them by the 100s. They stab you and your doll, so you need practice with the "safety" pins first)
And, you start using a sewing machine to do the same type of stitches you just did.
For a sewing machine you really want a GOOD basic one.
Like others commented above, you use 4 stitches for almost all clothes.
My 40 year old sewing machine does them all just fine.
--- -- -- -- -- ----
Now for the advanced stuff.
You know the edges of panties?
Well, that is done with a serger. It has 4 spools of thread.
And it does this edge locking and edge cutting
You cannot do this with a standard sewing machine.
You cannot imitate this look.
Sooooo, if you have a project that has that look, and you want that smooth, one layer, tight fitting cloth. Then you will need a serger.
BUT! you will probably be happy just buying panties, and never need one of these.
Re: Sewing (machine) thread
- Siliconeman
- Doll Elder
- Posts: 3166
- Joined: Mon Nov 23, 2015 11:18 pm
- Location: Scandinavia
- Contact:
Re: Sewing (machine) thread
This machine cost me only 75 euros. It has very plasticky feel, I was able to get it working very easily. Reviewers of this machine comment that thick layers of fabric is not possible to do but doll-clothes are usually quite thin material. I am not intending to sew denim neither do my skills allow me to do that.
I think this will be fun trip!
Cheers!
Sili