Summit Series 168 Review

Post by **Maho Kim** » Mon Aug 17, 2020 8:36 am

: FaceShot4Forum.jpg (324.82 KiB) Viewed 1594 times

blindwebster · Post by **blindwebster** » Mon Aug 17, 2020 10:06 am

Just fantastic. They really did a wonderful job on her implanted hair as well.

Post by **AtomicPunk** » Mon Aug 17, 2020 10:08 am

Maho Kim wrote:
FaceShot4Forum.jpg

Great photo

Did you win anything?

NormalHuman · Post by **NormalHuman** » Mon Aug 17, 2020 3:59 pm

spidersense1 wrote:
Maho Kim wrote:
FaceShot4Forum.jpg
Great photo

Did you win anything?

She won me!!! :haha4:

We will probably play some pachinko later.

After I take care of a split seam on her left hand ring finger. This seam was split open since she arrived, but not to the bone deep, just superficial. I do not want it to open up further, so we are going to sil-poxy it shut.

NormalHuman · Post by **NormalHuman** » Wed Aug 19, 2020 4:47 am

Seems while I was moving Maho yesterday, I impacted her right foot on the floor, or edge of some furniture or something. she lost a toenail and she got a small tear in the bottom of her foot. I was already planning to fix up a seam split on her finger today (she came with it) so I got the sil-poxy out and we got her all fixed up, foot tear sealed, toenail replaced, and finger seam shut. We also pierced her ears. busy day of primping and preening. 24 hours for full cure of the sil-poxy.. so she is resting up.

Also, I got Maho with implanted public hair, it was sparse to start, and a bit less than half has come out. She has only been with me a week and we haven't done anything that stressful I thought. A lot of posing and clothes changing. It was something I requested, but did was not charged extra for. Can not recommend it.

The hair on her head is doing fine.. of course some has been shed, but nothing significant.

NormalHuman · Post by **NormalHuman** » Thu Aug 20, 2020 3:00 am

Got to fixing up Maho's back. I took the plug, cut off the outside disc, turned it around and put in the hole that I had prepped with sil-poxy.

Here are the pictures. 24 hours to full cure, but then she will be 100% waterproof.

: Maho Back Mod.jpg (246.4 KiB) Viewed 1434 times

Plug as manufactured.

: Maho Back Mod2.jpg (169.86 KiB) Viewed 1434 times

Dime for size comparison.

: Maho Back Mod3.jpg (185.24 KiB) Viewed 1434 times

Sil-Poxy, a must for any silicone doll companion.

: Maho Back Mod4.jpg (210.05 KiB) Viewed 1434 times

Plug cap cut off, turned around and inserted into hole after sil-poxy applied in hole and around outside gap.

: Maho Back Mod5.jpg (208.88 KiB) Viewed 1434 times

Sil-poxy spread smooth and cleaned up for outside seal.

: Maho Back Mod6.jpg (135.64 KiB) Viewed 1434 times

Not perfect, but better than a plug cap that catches hair, clothes, and would let water into the skeleton. EX would not fill the hole with matching silicone even with request because then they could not put her back into paint to conceal it. This hole is where the back hangar goes and that is how they get her around the factory.

PDutus · Post by **PDutus** » Thu Aug 20, 2020 3:20 am

A fine job! I wish they had the option of back hanging or no back hanging!

Pip-Doll88 · Post by **Pip-Doll88** » Thu Aug 20, 2020 6:36 pm

So how jiggly are the exdoll breasts? I haven't seen a video yet to demonstrate this.

ZannyDanger · Post by **ZannyDanger** » Thu Aug 20, 2020 7:04 pm

NormalHuman wrote:
Sil-poxy spread smooth and cleaned up for outside seal.
Maho Back Mod6.jpg
Not perfect, but better than a plug cap that catches hair, clothes, and would let water into the skeleton. EX would not fill the hole with matching silicone even with request because then they could not put her back into paint to conceal it. This hole is where the back hangar goes and that is how they get her around the factory.

Nicely done NH, i really wish EX would seriously reconsider offering the option to seal off that hole themselves before shipping, as not everyone has the need to hang their dolls.
My girls are always out and about so if i were to purchase a summit doll myself i would also prefer her not to have a hole in her back.

All in all you've done a pretty damn fine job at it i think.
Even if it is still somewhat visible, it is much, much better looking than the plug she had... maybe it can even become part of Maho's backstory now

NormalHuman · Post by **NormalHuman** » Thu Aug 20, 2020 7:11 pm

Pip-Doll88 wrote:So how jiggly are the exdoll breasts? I haven't seen a video yet to demonstrate this.

They have a medium density memory foam core, they are not ultra-soft bouncy breasts if that is what you are looking for. they will deform when weight is put on them, and rebound to shape quickly. They are soft to handle, but not like marshmallow soft.

NormalHuman · Post by **NormalHuman** » Thu Aug 20, 2020 7:20 pm

ZannyDanger wrote:
NormalHuman wrote:
Sil-poxy spread smooth and cleaned up for outside seal.
Maho Back Mod6.jpg
Not perfect, but better than a plug cap that catches hair, clothes, and would let water into the skeleton. EX would not fill the hole with matching silicone even with request because then they could not put her back into paint to conceal it. This hole is where the back hangar goes and that is how they get her around the factory.
Nicely done NH, i really wish EX would seriously reconsider offering the option to seal off that hole themselves before shipping, as not everyone has the need to hang their dolls.
My girls are always out and about so if i were to purchase a summit doll myself i would also prefer her not to have a hole in her back.

All in all you've done a pretty damn fine job at it i think.
Even if it is still somewhat visible, it is much, much better looking than the plug she had... maybe it can even become part of Maho's backstory now

Filled would have been my preference too, but seeing layout pictures of the factory, and they move the dolls suspended by hangars from each stage to the next. I can understand how it would have caused them a lot of difficulty if she had no way to hang.

BiSH · Post by **BiSH** » Thu Aug 20, 2020 9:24 pm

NormalHuman wrote: Sil-Poxy, a must for any silicone doll companion.

I'm adding Sil-Poxy to my list. Thanks. And good job on the surgeries!

NormalHuman · Post by **NormalHuman** » Fri Aug 21, 2020 1:28 am

BiSH wrote:
NormalHuman wrote: Sil-Poxy, a must for any silicone doll companion.
I'm adding Sil-Poxy to my list. Thanks. And good job on the surgeries!

It's good stuff.. and it has a shore hardness of 40A, our Summit ladies skin is somewhere in the 30-45A. The elasticity to break of sil-poxy is about 750%, which means you can stretch it really far before if snaps. it is basically overkill for fixing up skin tears on our ladies, but it works, there is no mixing, or multiple application steps, and it's clear so it doesn't cause a colour problem. you can add colour to it if you like, but colour matching is tough unless you have the original formula mix.

I used to work with silicone and plastics in manufacturing and mold making, but I think anyone with the ability to use a fairly steady hand should have no problem using this for minor repairs on their dolls skin.

Maho is feeling good today, we are having bath time here again. she sure does attract little fuzzy bits. And she is way too excited, so will probably be taking some pictures after.

NormalHuman · Post by **NormalHuman** » Sun Aug 23, 2020 5:10 am

so... best bra fit on Maho is actually a 32C way more common than smaller band sizes too, so much variety.. hurray

BiSH · Post by **BiSH** » Mon Aug 24, 2020 5:43 pm

NormalHuman wrote:So I got the sil-poxy out and we got her all fixed up, foot tear sealed, toenail replaced, and finger seam shut. We also pierced her ears. busy day of primping and preening. 24 hours for full cure of the sil-poxy.. so she is resting up.

Quick question. I see you say 24 hrs for full cure but the tube of sil-poxy says 12 minutes. Just asking your advice on how long I should wait for finished procedure? I had a skin tear and a toe split.

I gotta do a better job protecting her feet.