Help wanted for wm 140cm doll

CaptTaco · Post by **CaptTaco** » Sun Jul 26, 2020 2:25 pm

I am completely new to this so please forgive me. I don't wanna brake any rules or anything. So i have been trying to do as much research as i can before i pull the trigger on buying a doll. I have looked at about 20 pages on here for information. I contacted a couple websites and watched unboxing videos.

I am roughly 6 feet tall. Would a 140cm doll seem too childish to my hight? I am looking to get a doll that is light weight and easy to store and hide when needed.

The website i am looking at is bestlovesexdoll.com
Is this a respectable site? Looks mostly legit to me and i contacted wmdoll.com and asked if bestlovesexdolls was a legit reseller. They said its on there legit list and to look for the anti-fake code on the manual. But i would need to purchase the doll first to get the manual? So not a lot of point to that i think.

The only thing im not sure of is i found the doll im interested in. Twice on there site and one was discounted. I asked them about it. Like if their the same doll and why they where 2 different prices. There response was that it was a flash sale. Does that mean... There defective?damaged? Or what.

The links to the doll is here.
https://bestlovesexdoll.com/products/14 ... 0608407607

https://bestlovesexdoll.com/products/40 ... 8731107383

What one do i get?

I saw a video.
https://youtu.be/Iqa2umPCMqs
I don't even know if that's from the sam. Site or even the same doll. It doesn't look the 4f5inchs or what ever it is. I don't even know if this guy has a good reputation for being accurate.

Any input would be very appreciated.

Post by **Slew** » Sun Jul 26, 2020 11:41 pm

Hi and welcome,

Sorry, that's not going to be a respectable site, the prices are a third of what you would pay for legit dolls. It's concerning that WM told you they were legitimate. Are you sure you contacted the real WM doll?

$729 for a WM 140 doll, is not right.

Now that you're here, if you want to know where to buy a doll, our members will be happy to make recommendations.

seagull · Post by **seagull** » Sun Jul 26, 2020 11:52 pm

CaptTaco
I'm same height, don't give a damn about what others may think of my choices, and getting a good quality doll is priceless.
A year or so ago I went with Kimber, solid skeleton, tpe body that is still pretty much unmarked, have lost makeup, eyelashes & some fingernails. Had one finger wire poke.
Wouldn't swap her, it, the doll for anything

CaptTaco · Post by **CaptTaco** » Mon Jul 27, 2020 1:52 am

Slew wrote:Hi and welcome,

Sorry, that's not going to be a respectable site, the prices are a third of what you would pay for legit dolls. It's concerning that WM told you they were legitimate. Are you sure you contacted the real WM doll?

$729 for a WM 140 doll, is not right.

Now that you're here, if you want to know where to buy a doll, our members will be happy to make recommendations.

I could have the wrong one?
http://wmdollshop.com/
I went there and went to the contact page and filled out the contact form. The first link is $1,059.00 and the second link is for $729. They said the $729 was a flash sale. I do agree its a little concerning. What would the normal price be or a 140cm? When i looked around at diff sites i saw an average around $1060ish

CaptTaco · Post by **CaptTaco** » Mon Jul 27, 2020 1:58 am

seagull wrote:CaptTaco
I'm same height, don't give a damn about what others may think of my choices, and getting a good quality doll is priceless.
A year or so ago I went with Kimber, solid skeleton, tpe body that is still pretty much unmarked, have lost makeup, eyelashes & some fingernails. Had one finger wire poke.
Wouldn't swap her, it, the doll for anything

Thanks for the positive feedback I appreciate the reassurance

Post by **Slew** » Mon Jul 27, 2020 2:28 am

Hi, yeah the WM 140 should be around $1550-1750

I looked at a few of our listed vendors' prices..
1AM $1695 https://iamdollusa.com/product-category/tpe/page/3/
SEXXDOLLS.COM $1560 https://www.sexxdolls.co/collections/140cm-47
Silicone Lovers $1750 https://siliconelovers.com/collections/ ... ight=140cm

If you're seeing $1050 for a 140, that's not likely to be Jinsan legitimate sourced dolls,, you're looking at a 140-ish cm doll that was possibly counterfeit or at least a crude sculpt and cheap TPE blend of questionable safety. Buyer beware.

JustinBridou · Post by **JustinBridou** » Mon Jul 27, 2020 5:45 am

Hi,

Also look at the OR138, which are similar in size to the WM140 and made in the same factory (Jinsan). I got mine for a little less than that (< 1500$), bought from recommended sellers on TDF.

The problem that can happen with the size 140 is that it can look a bit young and that's not necessarily what you want. I don't have such problems with mine, because I have chose heads that have an adult look.

Be careful with the heads though: although they can be interchanged, not all are suitable. This is not a technical concern, but rather aesthetic: the doll being relatively small in size, you should not put a head on it that looks too big. For this, the advice of a qualified salesperson is often very useful for the choice.

CaptTaco · Post by **CaptTaco** » Tue Jul 28, 2020 6:16 pm

Slew wrote:Hi, yeah the WM 140 should be around $1550-1750

I looked at a few of our listed vendors' prices..
1AM $1695 https://iamdollusa.com/product-category/tpe/page/3/
SEXXDOLLS.COM $1560 https://www.sexxdolls.co/collections/140cm-47
Silicone Lovers $1750 https://siliconelovers.com/collections/ ... ight=140cm

If you're seeing $1050 for a 140, that's not likely to be Jinsan legitimate sourced dolls,, you're looking at a 140-ish cm doll that was possibly counterfeit or at least a crude sculpt and cheap TPE blend of questionable safety. Buyer beware.

https://www.sexxdolls.co/collections/14 ... up-head-36 would you say that one is better and legit?

Post by **Slew** » Tue Jul 28, 2020 6:48 pm

Hey Cap, yes, that is the same site I linked in the middle above, SEXXDOLLS.CO are one of our listed vendors. I wrote .COM above, but that's the site linked.

For reference, here's our full list of vetted vendors: http://www.dollforum.com/forum/viewforum.php?f=210

CaptTaco · Post by **CaptTaco** » Tue Jul 28, 2020 7:18 pm

Thanks i ran down the list today and looked at pricing and options. This one seems to be the best with free shrugging shoulders, hollow breasts and standing feet.

Post by **Slew** » Tue Jul 28, 2020 7:46 pm

Nice. Well some random advice, be sure about the standing feet. Those bolts will always be there, but the skeleton won't always hold a standing pose, so at some point you've got useless bolts on her feet, ruining foot massages and tearing through socks.. just food for thought.

I personally don't need dolls to stand around much, so I'd never want this option in the first place. I like to squeeze a doll foot and I don't want to feel metal there.

CaptTaco · Post by **CaptTaco** » Tue Jul 28, 2020 8:04 pm

So the plate is there without the standing option? I read if you don't have it. the skeleton will go threw the foot. Like if you where to bend her over the bed and had some weight on the feet. Socks is kind of a fetishes so tearing threw them wouldn't be good. Couldn't i just unscrew them? And don't they have caps to put over them? I was also thinking of pushing vasaline into the holes to watter proof them for when im cleaning her in the shower. Ill have to find something to cover the neck. Maybe a rubber cap to a pipe?

Post by **Slew** » Tue Jul 28, 2020 8:20 pm

Well, there are lots of things to consider. There are caps to cover the bolts so if you like the standing option then by all means go for it, just know that standing won't be a permanent feature, depending on the knees getting loose over time. I think on most skeletons these days, you can tighten the joints yourself, if you're up to performing invasive surgery.

As for taking her in the shower, use extreme caution. All sort of things can go wrong in there.

CaptTaco · Post by **CaptTaco** » Tue Jul 28, 2020 8:29 pm

I dont really care if she stands. Its more of the weight with the skeleton Going threw. I also thought maybe putting shorter bolts in and filling with tpe?

CaptTaco · Post by **CaptTaco** » Tue Jul 28, 2020 8:39 pm

Slew wrote:Well, there are lots of things to consider. There are caps to cover the bolts so if you like the standing option then by all means go for it, just know that standing won't be a permanent feature, depending on the knees getting loose over time. I think on most skeletons these days, you can tighten the joints yourself, if you're up to performing invasive surgery.

As for taking her in the shower, use extreme caution. All sort of things can go wrong in there.

Of course but easy cleanup