The Doll Forum

just a guy wrote: ↑Sun Jan 28, 2024 7:30 am One thing that interest me in this torso journey is that did Lovenestle made the first one 138 torso for free of charge ? You asked them to make it and they jsut made it wihout any down payment ?

And the second one 110cm too ?
and when you now have decided to buy the second 110cm torso how much it costs without the demo prints if Lovenestle didn 't make those free which I highly doubt they would do since it's real work to make the test prints.

It all cost, nothing was free. I paid in full first to have the 135cm torso created (which included the materials and labor used to create the failed test product), and then paid a difference in cost to accommodate everything that came next with the 110cm torso.

They do not take down payments, you'll have to pay in full first before any work is contracted out to proceed.

it's good that you shared the failed version then since people now know that even though the work can go bad you still need to pay the manufacturing even if it fails and you don't get anythting out of it.
I will wait in interest to see the 110cm version when you get it how big it is

There are 110cm torsos out now, but with head they are this tall so I quess your version is the biggest that there is out now

How did they remove the partition lines in the mold that the separate 3D-printed parts created when placed together?

neutrino wrote: ↑Sun Jan 28, 2024 1:16 pm How did they remove the partition lines in the mold that the separate 3D-printed parts created when placed together?

They didn't, if you look real closely, they're still there.
It's just one of those things that couldn't be avoided. We discussed it before she was created, and I was fine with, since it's barely noticeable, due to the level of skin texture detail that does an excellent job at hiding them.

They would have been a whole lot more noticeable, if her skin had been smooth and untextured like many other silicone models.

All and all ..... I'm very happy with the results.

just a guy wrote: ↑Sun Jan 28, 2024 11:59 am
There are 110cm torsos out now, but with head they are this tall so I quess your version is the biggest that there is out now

Yep! she officially is the biggest silicone or TPE torso out right now.

She also officially has the biggest ass for any silicone doll or torso created, as of now.

Yes, a 55-inch ass normally deserves its own zip code, but how big it appears also depends on how long the torso is. If it is on a 5'6 girl, then it looks huge indeed. But on this very long torso, it almost looks normal size if there is no reference ass beside it. How tall would do you reckon she would be if she had a full body? 6'4???

neutrino wrote: ↑Sun Jan 28, 2024 5:48 pm Yes, a 55-inch ass normally deserves its own zip code, but how big it appears also depends on how long the torso is. If it is on a 5'6 girl, then it looks huge indeed. But on this very long torso, it almost looks normal size if there is no reference ass beside it. How tall would do you reckon she would be if she had a full body? 6'4???

Neutrino, I'm so glad you brought this topic up .....

Yes, it's pretty difficult to determine just how big her ass really is, without some type of references ...

So, let's take a closer look at a couple different women with 55-icnh asses, so we can all gain a better grasp of just how big 55-inches really is.
55-inch Club ...
But yeah, she would be really close to six feet tall, if ever turned into a full-sized doll.... with a 55-inch booty.



Yes, the torso is long .... but the ASS is still very BIG ... which is another reason why she weighs 68kg.

And remember, the normal sized 85cm Vanessa has a 40-inch ass, which is actually considered above average, in the world of dolls.

King Solo wrote: ↑Tue Jan 23, 2024 7:48 pm
So, a line of more robust taller Western styled dolls and torsos is most definitely needed right now, and if no one ever steps outside of the comforts of the status que and actually dose something about it. Then real change will inevitable never manifest itself.

At least that's how I see things, which is why I'm doing my part to try and shake things up!

A taller voluptuous Western inspired doll thread, sounds like a fantastic idea!
00005-2561734528-swapped.jpg

One where we can all come together to express our wants needs and desires, but actually do something about it, by making it actually happen.

I would even go as far as to suggest us as a group starting up a GoFundMe account. To finance the creation of a specified model that we've all worked on and agreed upon. Otherwise, it'll just be a page about talking about what we want, instead of actually doing something about taking the necessary steps and actions to bring those wants and desires into manifested realty.

Firstly, I want to congratulate you on the great work! Mega Vanessa is a dream come true. I hope she arrives safely in your hands.

My suggestion: how about using your example of success with Mega Vanessa and starting a new thread for Queen Jody or Princess Vickie's project?




I'm using both as an example of a body to be designed only. Another option would be to propose several porn stars as an example of a body to be developed. The advantage of using them as a base is that there are many photos and videos of them in the most varied positions. Everyone would know what was being produced.

I know you and others want a tall doll, but if we can make a 170 cm doll weighing up to 60 kg, I believe we would be able to attract more people as many, including me, cannot handle a leviathan weighing 80 kg or more. The idea of removable arms and legs could be useful to help reduce shipping weight.



If the cost of developing a new body is 5000 dollars, if we could get at least 10 people interested in a specific type of body, each one would have to pay only 500 dollars plus the cost of the doll and shipping. For a customized doll it is a reasonable price.

Does my idea sound interesting? I hope so, as a token of goodwill I will donate my doll designs for free to Kingdolls.

How did they remove all the horizontal print lines from the 3D-printed parts, with such a huge surface area to sand (and for the 135 cm model too)? Or will the print lines still be there?

They probably used putty to fill in the print lines, instead of sanding the print lines off. That would explain how they hid the partition lines so well and gave some texture to the surface.

Bouncer wrote: ↑Mon Jan 29, 2024 3:17 am

King Solo wrote: ↑Tue Jan 23, 2024 7:48 pm
So, a line of more robust taller Western styled dolls and torsos is most definitely needed right now, and if no one ever steps outside of the comforts of the status que and actually dose something about it. Then real change will inevitable never manifest itself.

At least that's how I see things, which is why I'm doing my part to try and shake things up!

A taller voluptuous Western inspired doll thread, sounds like a fantastic idea!
00005-2561734528-swapped.jpg

One where we can all come together to express our wants needs and desires, but actually do something about it, by making it actually happen.

I would even go as far as to suggest us as a group starting up a GoFundMe account. To finance the creation of a specified model that we've all worked on and agreed upon. Otherwise, it'll just be a page about talking about what we want, instead of actually doing something about taking the necessary steps and actions to bring those wants and desires into manifested realty.

Firstly, I want to congratulate you on the great work! Mega Vanessa is a dream come true. I hope she arrives safely in your hands.

My suggestion: how about using your example of success with Mega Vanessa and starting a new thread for Queen Jody or Princess Vickie's project?


00010-3045443155-swapped.png


00020-792665521-swapped.png


00043-792665521-swapped.png


00015-3584071269-swapped.png


00081-3584071269-swapped.png


00175-2587801234-swapped.png




I'm using both as an example of a body to be designed only. Another option would be to propose several porn stars as an example of a body to be developed. The advantage of using them as a base is that there are many photos and videos of them in the most varied positions. Everyone would know what was being produced.

I know you and others want a tall doll, but if we can make a 170 cm doll weighing up to 60 kg, I believe we would be able to attract more people as many, including me, cannot handle a leviathan weighing 80 kg or more. The idea of removable arms and legs could be useful to help reduce shipping weight.


00035-1672566288-swapped.png



If the cost of developing a new body is 5000 dollars, if we could get at least 10 people interested in a specific type of body, each one would have to pay only 500 dollars plus the cost of the doll and shipping. For a customized doll it is a reasonable price.

Does my idea sound interesting? I hope so, as a token of goodwill I will donate my doll designs for free to Kingdolls.

Hey Bouncer,

I'm all for the idea, count me in!

I've already designed quite a few "natural styled" body sculpts already.

If we were to seriously do this, I would suggest we try to stay as natural and realistic in our designs as possible. There's already enough fantasy styled sculpts out in the market, so we should be trying our best to carve out our own little niche of realistic Western styled bodies, to satisfy the needs of those wishing for more realistic sculpts.

But of course, one of the main issues with realism is that they're more than likely going to weigh almost as much as their real-life counter parts.

So yes, they would most definitely need to have the ability to be assembled and disassembled.

Here's a few examples of what I've already designed.

Natural Hour Glass Body Natural Pear Body
I've even designed a Natural BBW Body that would most definitely need to be partitioned at the limbs, (possibly even at the torso) with the ability to be assembled and disassembled. These are all just examples, we would all need to come to an agreement as to how we would like for the group model to be sculpted, as you suggested.

And then I could 3D design her from that point forward. What's even cooler is that our 3D designs should have the ability to be 3D printed in the same way this Mega torso was, but we'll have to discuss that a later date, after I've done more research into it.

An investment of $500 from 10 participants in order to fund the creation of a 5k mold, also sounds like a very advantageous idea for any parties interested. We'll just have to work out the finer details, if we decided to go public with it. Since everyone involved would need to profit off the sale of whatever model they invested in to have created.

But I'm absolutely serious, I'll set up a thread after I receive and review this Mega torso, so that way we'll all have a more informed idea of if bodies of this scale, is even plausible.

neutrino wrote: ↑Mon Jan 29, 2024 1:54 pm How did they remove all the horizontal print lines from the 3D-printed parts, with such a huge surface area to sand (and for the 135 cm model too)? Or will the print lines still be there?

I don't know how they managed to do it; all I know is that they did a really good job at hiding them.

Well, if you are going to 3D-print those bodies you designed, you better find out what they did (you paid them, so you are entitled to know how they did it). I'm guessing they put putty to cover the print lines, and over the separation lines too. It possible they 3D-printed the mold itself, and put putty on the inside.

Just received softness level videos in from the factory

The level of bounce and jiggle is insane .....Enjoy!



The ass is very impressive .... the sound that it makes when smacked, is so realistic.

Man! That's sexy! I'm waiting for her to hit the market. Any updates on shipping?

mholmes wrote: ↑Wed Jan 31, 2024 7:54 pm Man! That's sexy! I'm waiting for her to hit the market. Any updates on shipping?

She ships out today. So, an informative review is coming up soon.

But be warned, her over the international weight shipping limit, is causing her to tack on a hefty shipping fee, outside of what it'll cost to produce her.

We're currently trying to figure out ways to make her "lighter" (so it'll be cheaper to ship her) without jeopardizing the level of her softness.

Hollow breast is on the table as an option, which might work, plus, they'll be a whole lot less stressful on the silicone, as well as lengthen her overall lifespan.

But the love-ass is a must, if you truly want to experience the awesomeness of this torso ....

I was thinking about a way to reduce the weight without too many changes. She is awesome the way she is. Hollow breast or butt would be a deal breaker for me! I thought a smaller waist and removing the legs would reduce several pounds. 150lbs is a lot to manage and if shipping that weight is a problem there is no way she's making it to the market. I'm curious as to what happens. Anxiously waiting for the outcome. Good luck!