My Collection - Reviews and Tips
- PoolShark84
- Contributing Poster
- Posts: 34
- Joined: Mon Feb 13, 2017 10:43 am
- Contact:
My Collection - Reviews and Tips
So what do you say we get started!
When it comes to storing my ever growing collection, I decided to go with a college trunk that was found at Wal-Mart for $25 along with a table I use for cleaning and drying for about $30. I wasn't fond of the interior design, so I purchased some red beach towels ($2.75 each), gave them a wash, and sized each side for a better interior. For lube purposes, I switch out between Passion ($10 for 8oz) and Love Juice ($15 for 12oz). I'm kind of at a toss up on which one I prefer honestly. Passion is more runny, but can dry out after one use. Love Juice, on the other hand, is thicker, but can last for quite some time if you chose to go more than one round. On helping to air dry mainly fleshlights, I find it best to let the sleeves "hang out to dry" by using a screen door butt hinge ($3). For my apartment, I do get random inspections (like everyone else in the complex) to make sure the apartment is being kept clean and such. I have often been afraid of hanging my toys in the shower, finding the landlord shrieking But I have noticed the bedroom is never inspected, hence having it hidden with the posters by closing it. To also help with drying, I use a long K'Nex piece that I wrap a paper towel around to slip into all toys, squeezing around to soak up any water drops. After the towel, I follow up with several strong puffs from a Giottos Rocket Air Blaster ($12). Air exhales from the red tip, more coming in at the bottom with no water accidently being sucked in. There will be plenty more to follow, but figured this should be a good start.
- PoolShark84
- Contributing Poster
- Posts: 34
- Joined: Mon Feb 13, 2017 10:43 am
- Contact:
Re: My Collection - Reviews and Tips
As for cleaning it, this method will apply to all other fleshlights in my collection; I find it best to go to town on the toy, as many rounds as I wish before clean-up time. Take the sleeve out of the case and unscrew the bottom suction cap (can be tightened or loosen for extra stimulation), rinsing the case and cap in hot water, using a sponge scrub brush that can be found at Wal-Mart for a few dollars.
For the sleeve itself, I take it with me when showering to wash it down with Antibacterial Soap and Shibari Antibacterial Toy Cleaner. Now hold on...before anyone starts with the comments, "But dude! You're not suppose to use soap with silicone! It will destroy the toy!"...why that sounds so metal is beyond me. Anyways, yes I do agree soap in general can be bad for these kinds of toys. But using a drop or two of unscented antibacterial soap will not harm the toy. Trust me, I've used this method now for five years, and never seen any toys break down. Plus in my method, I am in the shower, water flowing through quickly. For extra security, I do spray the inside with Shibari, closing one end off to let water fill to the top, and shake it around. Make sure to rinse thoroughly!
Drying is the true make or break of any toys. If the toys are not properly dried, mold can form inside of the canals. I have not had this happen, but if there is a foul smell coming from the toy, throw it out! No need to risk your second in command for a toy that can be easily replaced. I use the same drying trick from above with the K'Nex rod and Giottos Rocket Air Blaster to help any fleshlight out, but this alone will not be enough. I take a metal hanger and wrap it around the handle of the fleshlight case, forming an O-ring to hang the sleeve up to dry with the bedroom ceiling fan going. I generally leave it hanging for 10-15 hours (way before bedtime). When getting up, I'll take another paper towel piece with the K'Nex rod, brushing the inside and squeezing the toy to the towel as a precaution. This might seem like overkill to ensure it's dry, but it's better safe than sorry for wasting money on toys. Last, but not least, cannot forget to powder the toy to prolong it's life!
- PoolShark84
- Contributing Poster
- Posts: 34
- Joined: Mon Feb 13, 2017 10:43 am
- Contact:
Re: My Collection - Reviews and Tips
The method of cleaning for these toys remains the same as with fleshlights like above, but with some creativity. My fleshlights hang by a wire hanger, but these toys are unable to use the same approach. So I built myself a drying tower using K'Nex to let the toys stand vertically, letting gravity take over for any remaining water drops to come out. The red rods at the top of the tower simply hold the toy in a standing position while the small white rods at the bottom keep the toy in place. Again, I usually let these toys sit out for about 10-15 hours for dry time after using a K'Nex paper towel rod and Giottos Rocket Air Blaster.
- PoolShark84
- Contributing Poster
- Posts: 34
- Joined: Mon Feb 13, 2017 10:43 am
- Contact:
Re: My Collection - Reviews and Tips
Now here's an added bonus to this post...sometimes it is best to go hands free, heightening the experience of the fun. After having many sessions with this toy, I wanted the hands free experience badly. Most blow up dolls do not have an entry that would accommodate this toy's size. After searching around, I did finally come across one designed for toys like these...the Airi Himekawa love doll! Some reviews have claimed this doll cannot handle anything over eight inches in depth, but this toy fits in perfectly! After adding sufficient lube, it never gets old going to town on this doll with the toy inserted. Missionary and (reverse) cowgirl are the only best positions for this toy, but they do get the job done nicely. Just don't forget to wipe down the blow up doll after each use to also ensure it's long lasting life. Could this toy also be used in a Teddy Babe doll? I would very much believe so as, from what I've seen in videos, the vaginal entrance of the dolls are purposely closed in to hold plush inserts. In theory, that same tightness should hold a Witch's Temptation in place snuggly with the toy's thickness ensuring no leakage inside of any Teddy Babe.
As always, comments, questions, even suggestions/requests are very much welcome!
- PoolShark84
- Contributing Poster
- Posts: 34
- Joined: Mon Feb 13, 2017 10:43 am
- Contact:
Re: My Collection - Reviews and Tips
Note: that particular sleeve is a new purchase from the Freaks collection: Reaper. I shall review this lovely soon, but I always believe in the policy, "First cum, first serve." And I have quite a few more toys that have tended to my needs before this one, only polite to be fair.
- deerman
- ~ Member ~
- Posts: 8376
- Joined: Wed Jan 11, 2012 10:52 am
- Location: Just past the pond, the last deer trail on the left
Re: My Collection - Reviews and Tips
- PoolShark84
- Contributing Poster
- Posts: 34
- Joined: Mon Feb 13, 2017 10:43 am
- Contact:
Re: My Collection - Reviews and Tips
(Takes a bow) Why thank you, sir! I take great pride in taking care of my toysdeerman wrote:It looks like you are preparred
- PoolShark84
- Contributing Poster
- Posts: 34
- Joined: Mon Feb 13, 2017 10:43 am
- Contact:
Re: My Collection - Reviews and Tips
- PoolShark84
- Contributing Poster
- Posts: 34
- Joined: Mon Feb 13, 2017 10:43 am
- Contact:
Re: My Collection - Reviews and Tips
- PoolShark84
- Contributing Poster
- Posts: 34
- Joined: Mon Feb 13, 2017 10:43 am
- Contact:
Re: My Collection - Reviews and Tips
- windave
- Doll Elder
- Posts: 2909
- Joined: Mon Jan 08, 2007 12:00 am
- Location: left coastal now
- Contact:
Re: My Collection - Reviews and Tips
- PoolShark84
- Contributing Poster
- Posts: 34
- Joined: Mon Feb 13, 2017 10:43 am
- Contact:
Re: My Collection - Reviews and Tips
Hmm...now that you mention it...oh goodness, I'm never going to look at my toys the same anymorewindave wrote:Gee, I never realized how some of these devices look like extreme deep sea lifeforms.
Re: My Collection - Reviews and Tips
- PoolShark84
- Contributing Poster
- Posts: 34
- Joined: Mon Feb 13, 2017 10:43 am
- Contact:
Re: My Collection - Reviews and Tips
Much appreciated! I do what I can to give honest reviews and pics.jayo215 wrote:Great posts! If this were Reddit I would upvote all of them.
- PoolShark84
- Contributing Poster
- Posts: 34
- Joined: Mon Feb 13, 2017 10:43 am
- Contact:
Re: My Collection - Reviews and Tips
The bulk of this toy alone made me believe it was well put together to the point I had to turn the toy on it's side for any pictures. The artwork on the box is of a cute angel elf, looking so innocent, yet the toy was either playing hard to get or stubborn for pics...this did not stop the grin from forming on my face. For having such a tall slit, I was kind of surprised to find just a small hole to enter into. With any toy, I enjoy going slow and gentle, savoring the feeling (plus don't want to damage any of the products by being aggressive). As you can see in the third pic, there are tons of popcorn bumps along the inside along with a vein like swirl. I didn't think the vein would be of anything much, but wow this proved to be wrong. It felt like a slithering tongue greedily wrapping around me, only growing more with every thrust. I also found out if you go nice and slow, the toy gives off a hungry like sucking noise, mixing well with the vein. The silicone feel is quite different (not like a fleshlight) with an unusual feel with the slithering texture and bumps, but definitely worth every penny! I personally enjoy having toys that are a half inch thick or greater just to assure that the toy will last for some time.