Removal/ Replacement: "Breast Enhancement" Chapter 3
Re: Removal/ Replacement: "Breast Enhancement" Chapter 3
buy two pairs of Busty Aichan
http://www.queencatadulttoys.com/busty-aichan/
if you flip them around they will take the form of a round ball.
put one pair Busty Aichan in each breast of the YL150
this material they uses is the most realistic life like breast softness so far so i can imagine how the breasts will feel like on the YL150.
also weight should be perfect as one pair of Busty Aichan weights 2.2Kg
amazing realsitic softness
added weight and NO leakage
problem1: expencive
problem2: the opening on the YL150s breasts must be bigger in order to put these in but i still think TPE Glue will seal it.
these breasts and the hole body has already been in two parts at the factory so its already Glued
Edit: possible a better solution is these two separate breasts
http://www.queencatadulttoys.com/quty-tits/
same softness as Busty Aichan but just two breast balls.
for these it takes 2 pairs to get the proper weight to each of the YL150s breasts but they should be easier to put in.
less money to spend here (130$ for two pairs. 260$ for four pairs to cover both YL150 breasts)
- jwalker499
- Contributing Poster
- Posts: 25
- Joined: Mon Sep 26, 2016 8:08 am
- Location: Japan
- Contact:
Re: Removal/ Replacement: "Breast Enhancement" Chapter 3
They can come in many different sizes and there is good possibility that you can remove the thin casing that covers the silicone form, then lube it and insert with a much smaller hole than the entire breast.
https://www.amazon.com/Silicone-Breast- ... ssdressers
Also a follow up idea you could attempt to insert it periareolar (through the nipple) and then seal the area and replace the nipple with one of these guys.
https://www.amazon.com/Silicone-Attacha ... _mrai_3_dp
Re: Removal/ Replacement: "Breast Enhancement" Chapter 3
I happen to have a set for sale
http://www.dollforum.com/forum/viewtopi ... 28&t=80335
- Attachments
-
- IMG_0448.JPG (47.44 KiB) Viewed 4533 times
Re: Removal/ Replacement: "Breast Enhancement" Chapter 3
They are not for sale....
- Attachments
-
- IMG_0449.JPG (22.33 KiB) Viewed 4533 times
Re: Removal/ Replacement: "Breast Enhancement" Chapter 3
to firm i thinkjwalker499 wrote:Have you considered a silicone breast form?
im going for slime.
both breasts will be done this week.
btw i punctured the other breast aswell so now i have to fix both.
its really easy when you have tpe glue
the hole you need to do on the side can be really small
then just strech it some and put in a small cylinder so the hole gets bigger.
press in the slime
remove the cylinder and you can barely see the hole
and because the hole is so small slime will not leak out
use small swabs and put on some tpe glue in the hole and seal it.
with tpe glue you can make a hole and then seal and you cant see that there was a hole there before
its really amazing to have this glue and its fast.
30sec and the hole is sealed
- jwalker499
- Contributing Poster
- Posts: 25
- Joined: Mon Sep 26, 2016 8:08 am
- Location: Japan
- Contact:
Re: Removal/ Replacement: "Breast Enhancement" Chapter 3
Not to be stingy a few pics i have taken while experimenting on Subject Zero NSFW
https://drive.google.com/open?id=0ByEnO ... 0g4cHpWNXM
Re: Removal/ Replacement: "Breast Enhancement" Chapter 3
Re: Removal/ Replacement: "Breast Enhancement" Chapter 3
The link doesn't work for me. Could you post the photos here? THANK YOU!jwalker499 wrote:If you can please take photos as you go along. I have a leanne158cm Gigantic Busty doll have spent time messing around seeing how elastic she is, Great fun. Knowing how well it works with the slime is of great interest to me .
Not to be stingy a few pics i have taken while experimenting on Subject Zero NSFW
https://drive.google.com/open?id=0ByEnO ... 0g4cHpWNXM
*My juicy Cherry: viewtopic.php?t=154759
*Z-cup Moira: viewtopic.php?t=138543
*BBW Breanna: viewtopic.php?t=143116
*Yulia: viewtopic.php?t=122950
*Tina viewtopic.php?t=121819
*Aurora Jolie: viewtopic.php?t=106838
*World-famous Una Carha: viewtopic.php?t=93292
Re: Removal/ Replacement: "Breast Enhancement" Chapter 3
Re: Removal/ Replacement: "Breast Enhancement" Chapter 3
Mario, congratulations on your success! Can you post some photos at various angles, to help others who might want to repeat your work?mario9326 wrote:I tried Rev's method of adding slime to my 156 G doll and it came out really, REALLY nice. This is exactly what I have been missing on my doll. Her breasts look and feel so much better. Unfortunately I did have a little bit of a leak problem initially from the small incision area after adding 6 5oz barrels-o-slime to each breast. I tried to glue it shut but I guess the pressure inside wouldn't let it seal properly. I eventually had to cut a couple of pieces off my test TPE to make small plugs for the holes. Once I plugged em the leaking stopped and I was able to glue it shut. I can only imagine how much nicer this is on an ultra soft TPE model, but honestly I am very happy with the results on mine. PLEASE vendors, definitely consider doing this in the future.
*My juicy Cherry: viewtopic.php?t=154759
*Z-cup Moira: viewtopic.php?t=138543
*BBW Breanna: viewtopic.php?t=143116
*Yulia: viewtopic.php?t=122950
*Tina viewtopic.php?t=121819
*Aurora Jolie: viewtopic.php?t=106838
*World-famous Una Carha: viewtopic.php?t=93292
Re: Removal/ Replacement: "Breast Enhancement" Chapter 3
Re: Removal/ Replacement: "Breast Enhancement" Chapter 3
Can be applied from -10° to 150°F
Soft, creamy compound
Meets NSF/ANSI Standard 61
Will not support bacteria
Contains no petroleum
Slow rate of solubility
Non-toxic
Biodegradable
Will not separate
FBC™ System compatible
www.jtmproductsinc.net/phoenix_27XL.php
Re: Removal/ Replacement: "Breast Enhancement" Chapter 3
S13rb25 wrote:A suggestion instead of slime... what if you guys used pipe gasket lubricant? (Pipe soap)? It is organic, non toxic, has a very slimy goopy texture, and is cheap. The kind I'm familiar with Is also edible believe it or not, since it is used on pipes that carry public drinking water.
Can be applied from -10° to 150°F
Soft, creamy compound
Meets NSF/ANSI Standard 61
Will not support bacteria
Contains no petroleum
Slow rate of solubility
Non-toxic
Biodegradable
Will not separate
FBC™ System compatible
http://www.jtmproductsinc.net/phoenix_27XL.php
I'm no TPE expert but that sounds promising. WM really should make a mold of just the breast area so we could experiment on something that doesn't cost thousands of dollars.
Re: Removal/ Replacement: "Breast Enhancement" Chapter 3
Default upper breasts of the YL150 116cm
Now 127cm
i made it easy this time
just big balloons nothing more.
Balloons have a diam of around 30cm with no air so there isnt that much strech to the balloons either.
what i found is that you cant put any liquid inside as it will leak out after some time.
now its just air.
i could probably pump them up to 150cm without problems and still the breasts will point straight forward lol
the best thing with this as you can see with the naked breast is that i doesnt sag anymore.
also the softball feeling is gone
- subcom117
- Doll Advisor
- Posts: 668
- Joined: Fri Jul 25, 2003 12:00 am
- Location: In a K-Cup dream
- Contact:
Re: Removal/ Replacement: "Breast Enhancement" Chapter 3
Air usually leaks out of normal latex balloons within a few days. Do you leave a hole so they can be replaced and re-inflated, or did you use balloons of some other material?
Thanks for performing all the trial and error to see what works and for sharing your results.
rev wrote:Big Enough ?
Default upper breasts of the YL150 116cm
Now 127cm
i made it easy this time
just big balloons nothing more.
Balloons have a diam of around 30cm with no air so there isnt that much strech to the balloons either.