Neck Bolt
Moderator: TJ_Foxx
Neck Bolt
Re: Neck Bolt
I need to see how that ones put together.
- Smoke
- Doll Elder
- Posts: 2285
- Joined: Sat Jul 16, 2011 10:45 pm
- Location: All Alone. With CJ, EJ,Lana,Sami,Tori,Tami,Becki,Britney and Jewel
- Contact:
Re: Neck Bolt
Most humble servant of CJ's harem.
Please Visit CJ's Blog. https://syntheticerotica.blogspot.com/
Re: Neck Bolt
You're fantastic.310smokeme wrote:It's a quarter inch bolt and nut that goes through a bracket on the head and the neck stump on the upper spine. You need a ratchet extension and a 7/16" socket x2... ( 11 mm for you metric fans) to be able to access the bolt and nut where the neck and head attach. You need one for the bolt to hold the bolt and one for the nut to tighten it up. I'm assuming here that the neck is just loose and needs tightening up. If you need a bolt and nut 7/16" x 1 1/2 " should do it..... You need two flat washers as well. You can buy them at Home hardware... Canadian eh?? Or Canadian Tire... Home Depot... Lowes...Rona ... You name it.. You weren't very specific as to what the problem is so I'm just guessing..
- Begog
- Doll Patriarch
- Posts: 4548
- Joined: Mon Jun 30, 2014 8:01 pm
- Location: Dollmongering in an undisclosed location
- Contact:
Re: Neck Bolt
Yes, he is!jenks976 wrote:You're fantastic.310smokeme wrote:It's a quarter inch bolt........ so I'm just guessing..
- Smoke
- Doll Elder
- Posts: 2285
- Joined: Sat Jul 16, 2011 10:45 pm
- Location: All Alone. With CJ, EJ,Lana,Sami,Tori,Tami,Becki,Britney and Jewel
- Contact:
Re: Neck Bolt
This will also work on Boytoy Girls as well.
My lovely assistant and good sport. Dani.
With the head attached... you need to pull back the silicone around the neck just behind the ear. Just pull it back. It's very pliable. No need to cut.
You need to pull it back so you can insert the required tooling. 2 7/16" Sockets. 1/4" Drive is ideal. You can use 3/8" drive as well. What ever you have...Every man has some tools... Right... Just say right!!! And of course all the ladies know what I'm talking about!!
Same on the other side.
Tighten until you get the proper tension that you want.Remember... Lefty loosey ... Righty Tighty
Remove the tools and just tuck the silicone back where it was... Your done..
Use this same procedure on Boytoy Girls as well!
I'm not trying to treat anyone like a idiot here by some of my comments.. Some people just don't know.It's that simple.
I hope this helps.
PLEASE BABY DON'T KILL ME!!!!!!!
Smoke.
Most humble servant of CJ's harem.
Please Visit CJ's Blog. https://syntheticerotica.blogspot.com/
- siliconelover
- Doll Guru
- Posts: 5062
- Joined: Wed Feb 06, 2008 12:00 am
- Location: A Little South of Sanity ...
- Contact:
Re: Neck Bolt
Hey smoke,310smokeme wrote:
This will also work on Boytoy Girls as well.
Just a Note ...
Not all Boy Toys can be tightened this way. Matt switched to a pressed in fitting at one time that can Not be tightened ... Not sure of the dates but my late BT2 2011 is like this, there are threads regarding. Don't know but I imagine that if the BT3's are back to bolts they all are now.
- Smoke
- Doll Elder
- Posts: 2285
- Joined: Sat Jul 16, 2011 10:45 pm
- Location: All Alone. With CJ, EJ,Lana,Sami,Tori,Tami,Becki,Britney and Jewel
- Contact:
Re: Neck Bolt
siliconelover wrote:Hey smoke,310smokeme wrote:
This will also work on Boytoy Girls as well.
Just a Note ...
Not all Boy Toys can be tightened this way. Matt switched to a pressed in fitting at one time that can Not be tightened ... Not sure of the dates but my late 2011 is like this, there are threads regarding. Don't know but I imagine that if the 3's are back to bolts they all are now.
Well I stand corrected. I can say for sure this applies to my BT3
Most humble servant of CJ's harem.
Please Visit CJ's Blog. https://syntheticerotica.blogspot.com/
- siliconelover
- Doll Guru
- Posts: 5062
- Joined: Wed Feb 06, 2008 12:00 am
- Location: A Little South of Sanity ...
- Contact:
Re: Neck Bolt
And corrected you were Sir ! JK ; )310smokeme wrote:siliconelover wrote:Hey smoke,310smokeme wrote:
This will also work on Boytoy Girls as well.
Just a Note ...
Not all Boy Toys can be tightened this way. Matt switched to a pressed in fitting at one time that can Not be tightened ... Not sure of the dates but my late 2011 is like this, there are threads regarding. Don't know but I imagine that if the 3's are back to bolts they all are now.
Well I stand corrected. I can say for sure this applies to my BT3
Just a note for some that want to tighten that pesky press fitting, grwwwol. It can be drilled out and bolted. Takes some work, some skill and tools but may be worth it to some.
For the record, no one has gone to the effort you have to show RD's skull tech. Much appreciated here.
How you doin' smoke ?
- Smoke
- Doll Elder
- Posts: 2285
- Joined: Sat Jul 16, 2011 10:45 pm
- Location: All Alone. With CJ, EJ,Lana,Sami,Tori,Tami,Becki,Britney and Jewel
- Contact:
Re: Neck Bolt
siliconelover wrote:
How you doin' smoke ?
I'm hangin in there my friend. I hope all is well with you.
Most humble servant of CJ's harem.
Please Visit CJ's Blog. https://syntheticerotica.blogspot.com/