Doll latex old but sturdy
Doll latex old but sturdy
Il n’est pas possible de trouver sur le marché des poupées gonflable de cette qualité
Cette poupée gonflable est très solide car l’épaisseur des parois est importante : En millimètre (Tête = 3,9) (Bras = 2,2) (Corps = 3,2) (Jambe = 3)
Traduction (français > anglais
This very old doll, 2002, is a robustness
It is not possible to find on the market for inflatable dolls of this quality
This doll is very strong because the thickness of the walls is important in millimeters (Head = 3.9) (Arm = 2.2) (body = 3.2) (leg = 3)
Re: Doll latex old but sturdy
I love it, but I haven't it!
- Christine
- Doll Patriarch
- Posts: 4669
- Joined: Tue Feb 22, 2011 10:56 pm
- Location: S.F.D.D. Headquarters, Vegas
- Contact:
Re: Doll latex old but sturdy
Re: Doll latex old but sturdy
The hands are very detailed
Les pieds ne sont pas trop détaillés, mais avec des bas, cela ne se voit pas
The feet are not too detailed, but with stockings, it is not seen
Le profil
Profile
Re: Doll latex old but sturdy
And the latex looks so thick!
Re: Doll latex old but sturdy
Dressed in a skirt, the doll of 2002 latex remains attractive after 9 years of use
La silhouette de cette poupée est conservée malgré un gonflage important
Cette poupée est agréable et sexy
The silhouette of this doll is preserved despite significant inflation
This doll is nice and sexy
Je pense que beaucoup de fabriquant devrais réaliser des poupées gonflables avec une épaisseur de latex plus importante et renforcer l’intérieure pour conserver leurs silhouettes.
I think a lot of manufacturer should make dolls inflatable latex with a thickness of greater and strengthen the inner to keep their figures.
Re: Doll latex old but sturdy
J’ai découpé le vagin et l’anus d’une ancienne poupée
J’ai formé 2 boucles par collage pour passer un lien élastique
Here is a solution to maintain hygiene doll
I cut out the vagina and anus of an old doll
I formed two loops by bonding to move an elastic tie
Vous pouvez voir un croquis du système
You can see a sketch of the system Photo de principe du montage
Photo editing principle Une fois l’ensemble mis en place
Once all set up
- pygmalion2
- Doll Mentor
- Posts: 1955
- Joined: Fri Apr 16, 2004 12:00 am
- Contact:
Re: Doll latex old but sturdy
An ingenious solution for cleaning!
Mark and the Synthetiks
Re: Doll latex old but sturdy
Pourtant un système simple comme celui-ci est très facile à mettre en œuvre.
Il existe déjà des culottes latex avec orifice vaginal et anal mais de couleur noir et beaucoup trop enveloppante. Il faudrait une culotte latex type Tanga couleur peau.
Il serait possible de créer une entrée vaginale plus réaliste que ceux existant sur le même principe que les culottes, en plus de l’esthétique, l’hygiène de la poupée gonflable serait conservé.
Indeed, manufacturers should consider taking into account the cleaning of the dolls after using it. It is very difficult to clean properly.
Yet a simple system like this is very easy to implement.
There are already panties latex anal and vaginal opening but too much black and enveloping. There should be a Tanga panties latex type skin color.
It would be possible to create a more realistic vaginal entrance as those existing on the same principle as pants, in addition to aesthetics, hygiene doll would be retained.
Re: Doll latex old but sturdy
How do you get those cut out inserts to go into the other doll?
Do you use some kinda lubricant?
I thought you could not leave anything on latex for periods of time?
That said I mean I was told you are supose to rinse the dolls openings out directly
after each use and dry them off very well.
I have been very setback about ordering a latex doll due to these conditions.
I have been known to wake up in middle of night with my old doll and just go to town..
Last thing I want to do is have to get up in the middle of the night and rinse out the doll lol.
Can someone tell me really , "Just how sensitive is latex?"
Can it sit over night after use with a small amount of lubricant left behind without damage..
Sounds bad lol.. I use condoms most of the time because its a LOT simpler to cleanup..
Im just concerned about the left over residue of the water based lube being left on the doll over night..
Could this weaken the latex or cause breakdown?
My Girls Photo Threads:search.php?keywords=P528706&terms=all&a ... mit=Search
Review Threads: search.php?keywords=R172305&terms=all&a ... mit=Search
Re: Doll latex old but sturdy
Après utilisation, je retire ce dispositif, je le lave et le talc avant de le ranger.
L’avantage principal de cette solution c’est que le gel lubrifiant est à l’intérieur de ce second vagin et non pas dans le vagin de la poupée qui lui reste propre. Ce second vagin est en latex (Pris sur une ancienne poupée gonflable)
Je crois que sur la poupée Miranda il y à 2 parois, il est possible de faire ressortir celle-ci pour le nettoyage.
Excuser moi des erreurs de traduction, je ne parle pas anglais (Traduction automatique)
john1972
After use, I remove this device, I wash and talc before storing.
The main advantage of this solution is that the lubricant is within this second vagina and not in the vagina of the doll that it remains clean. This second latex vagina (Taken on an old doll)
I think the doll Miranda there are 2 sides, it is possible to highlight it for cleaning.
Excuse me for errors in translation, I do not speak english (automatic translation)
Re: Doll latex old but sturdy
I wouldnt mind of those dolls and change the head on it..
I dont like open mouth dolls...
But the body looks great on her..
What doll did you take the inserts out of ?
Just wondering lol
My Girls Photo Threads:search.php?keywords=P528706&terms=all&a ... mit=Search
Review Threads: search.php?keywords=R172305&terms=all&a ... mit=Search
Re: Doll latex old but sturdy
Elle présentait des fuites non réparables
The old latex doll that I cut the inserts is a redhead Laetitia
She had not repairable leaks
- Attachments
-
- Y42.jpg (37.44 KiB) Viewed 32014 times
Re: Doll latex old but sturdy
If the Poupee dolls where not 300+ each id consider ordering two of them
Or maybe just one full and one spare skin..
Then stretch the second skin over the top of the doll.
Inflate it and have a lot thicker more durable doll that hopefully
held her shape better as well..
The problem with thinner dolls is they bloat up when you air fill them fully.
So most people ive seen dont put that much air in them so they retain there shape better.
Also there is a posible way to do mods to the outter skin to make areas NOT stretch like glue
bands on the butt crack areas and around breast and things before stretching it over top of the
air filled section..
Im still debating on doing this method myself and just forgetting a solid doll for now..
I might mail Poupee and ask them how much more it would cost to get a spare skin with the order..
As for your doll..
Thats a great doll..
Im not really thrilled with open mouth dolls just kinda not my thing..
If I could get one of those and change the head on it that would be awsome..
Its great to see pics of this version.
It was a much better looking version of Letha..
Also im not a big fan of large breast so the Letha dolls where a turn off to me..
This model you have is perfect shape..
Also id bet by using this second insert into the cavitys makes the doll MUCH more solid and more fitting
to you durring sex and not so loose feeling like most talk about with Latex dolls..
My Girls Photo Threads:search.php?keywords=P528706&terms=all&a ... mit=Search
Review Threads: search.php?keywords=R172305&terms=all&a ... mit=Search