1AM not responding

155 Shannon Review !! (Face WM-46)

Reviews on 1AM Sex Dolls Sales and Services
Forum rules
This area of the forum is dedicated to Sales and Support experience reviews.
Product reviews should be posted in the manufacturer review forum, unless the product is exclusive offered by this vendor.
All posts in the Reviews section have to be approved by a moderator before they show up and will be locked after approval.
Reviews will only be approved if evidence is provided to back up the claims that are made.
User avatar
lasteros
Senior Member
Senior Member
Posts: 265
Joined: Sat Sep 19, 2015 12:05 am
Location: Ontario, CA
Contact:

Re: 155 Shannon Review !!

Post by lasteros »

Yes it's a slow process so far on the boobs I'm finding out, but I have the patience. I hope we are looking at the same tear. Here's another shot of her on her back and spread. The hole isn't much bigger than the vag one so the tear near the crack doesn't bother me as long as the hole won't actually tear. The hole was too small either way I couldn't resist that happening. I'm looking at the small surface hole that developed. What should I fill that with?
20151022_202020.jpg
20151022_202020.jpg (589.92 KiB) Viewed 2481 times

User avatar
lasteros
Senior Member
Senior Member
Posts: 265
Joined: Sat Sep 19, 2015 12:05 am
Location: Ontario, CA
Contact:

Re: 155 Shannon Review !!

Post by lasteros »


User avatar
lasteros
Senior Member
Senior Member
Posts: 265
Joined: Sat Sep 19, 2015 12:05 am
Location: Ontario, CA
Contact:

Re: 155 Shannon Review !!

Post by lasteros »

Yea.. Lots and lots of lube. I thought maybe I was using enough but I will use more. lol Thanks.

But in other news. More pics!! :)
Attachments
20151022_221858.jpg
20151022_221858.jpg (525.04 KiB) Viewed 2646 times
20151022_221800.jpg
20151022_221800.jpg (744.66 KiB) Viewed 2646 times
20151022_221612.jpg
20151022_221612.jpg (653.67 KiB) Viewed 2646 times
20151022_220351.jpg
20151022_220351.jpg (589.65 KiB) Viewed 2646 times

User avatar
lasteros
Senior Member
Senior Member
Posts: 265
Joined: Sat Sep 19, 2015 12:05 am
Location: Ontario, CA
Contact:

Re: 155 Shannon Review !!

Post by lasteros »

I can't sleep. :oops: :oops:
Attachments
20151023_033444.jpg
20151023_033444.jpg (826.86 KiB) Viewed 2566 times
20151023_033102.jpg
20151023_033102.jpg (578.42 KiB) Viewed 2566 times
20151023_033130.jpg
20151023_033130.jpg (707.96 KiB) Viewed 2566 times
20151023_033220.jpg
20151023_033220.jpg (510.1 KiB) Viewed 2566 times
20151023_034112.jpg
20151023_034112.jpg (618.3 KiB) Viewed 2566 times
20151023_040902.jpg
20151023_040902.jpg (545.58 KiB) Viewed 2566 times
20151023_041252.jpg
20151023_041252.jpg (518.34 KiB) Viewed 2566 times
20151023_041652.jpg
20151023_041652.jpg (505.11 KiB) Viewed 2566 times

User avatar
lasteros
Senior Member
Senior Member
Posts: 265
Joined: Sat Sep 19, 2015 12:05 am
Location: Ontario, CA
Contact:

Re: 155 Shannon Review !!

Post by lasteros »

I want to make sure I answer those questions rather concisely. I can post another video though once you get a doll and test the skeleton yourself a video can only do so much. For instance, Mae's right wrist does not hold posture palm out and the left one does.

There may very well be minor happenings you'll notice on each side of these dolls like this but they are minor and everything is symmetrical even the twist at the hips, shoulders, thighs and elbows for postures. Even though the wrist wont hold with the palm fully out it still can go the other way fine. The tension of twist helps for balance but the left hand works just as well. Balancing the doll and moving her around I was really focused on a two things. Finger pokes and if I were to lift now where I would twist, how I would grab to twist, what are potential hazards, clear a path, and then I do a safety lift. I check my grab and lift a little. If I have the skeleton grabbed correctly without damaging the tpe or have no body parts pressing against each other I let go and make sure I can do what i want to at this point. First thing I did with Mae was stand her up on my feet to feel how hard the skeleton would come down on the tpe, the shape of it in the foot, and the tension of the joint. Hands under the arms let down slowly and laid her back on the wall. Arms slightly back and on the wall palm out to take some pressure away from the feet.

She is mostly heavy in the torso so using that to your advantage when posing can alleviate the pressure on the feet. With standing dolls presumably on the rise you wont have an issue cleaning, dressing or powdering any kind of doll in the future. In my opinion those things are all equally as time consuming though the reward is worth it in the end. I had Mae powdered before clothing, then I brushed the powder off the outfit. The skin gets tacky after I dressed her in this specific outfit and the masquerade maid outfit so wash, dry and power came after the sensual undressing.

I split bathing, clothing and powdering almost immediately into two parts respectively because I currently don't have a stand or anchor. (tips needed) Bathing and powdering is front and back. Start on the back in doggy style position. One hand under the stomach left one leg and wash, powder, rest and switch legs. When bent in doggy I used my hand on the stomach to apply pressure and lift from the thigh on the inside with the other. Reached around with hand on the stomach holding her hip now with that elbow and straightening the calf with my other hand. You can also hold from the neck but the adjacent knee can potentially take the weight of you washing. Back to doggy I reach under her and between the legs with one hand. The other is on the neck as I lift I bend the back slightly into more of a fetal position, flip and lay on the neck and bend the back straight then straighten the legs. You don't have to bend but I like to do the roll out it makes her boobies bounce ;)
Cleaning from the front much easier.

Putting her back into fetal position from laying down both helps the most for cleaning and dressing and has taken me practice. The first time I tried to do this her head was holding most of the weight. Her body is heavier in the torso but the legs do have the ability to weigh her back back more at certain angles. There are a variety of possibilities for angles but if you have a tight outfit you want to make sure the arms can support the load and not rub against any surface that can cause a finger poke when bathing, dressing or powdering. I started with the bend of the arms and how much of an angle I could achieve without stress to the tpe. Then the legs and did my best to had a flush line. The feet bend straight with the legs and knees bend like a human leg so for the most part the legs and feet are safe, it's the knees and hands to worry about when you lay her down after the flip.

For dressing I start laying down. Legs first up in the air to the bum. Then fetal position and dressing from there is the most fun reaching around her and adjusting the top. You can be stopped at any time by this point to take time and admire what you're doing if you haven't already. The outfits I've found are costumes so far and nothing to fit her yet except some underwear and a few other dresses. The bra's I'm kind of waiting for tdf here to go and find the perfect bra fit but I may be the guinea pig. I kind of want a bra for her. The costumes both had waist ties I has able to tighten the outfit and really show the appearance of her. So I kind of cheated a little. You can see the knot in the back on the ww costume.

I was being generous with her boobs but then I realized the outfit was meant to wear like a bra. Once I started to tighten the straps the outfit can tight and it wasn't loose at all. Fitting her boob into the outfit and doing up the back, then the hair all done sitting on the table looking at her. I was working with a model! I'm sure all doll owners feel like this at this point in the dressing. Things really come full circle when your finishing up the details and all you can think of now is how to pose.

Working with tpe on the fingers is tricky. When the finger and nails become some what twisted I twist back. apply pressure on the tip and use every finger on that hand to support your bend and get used to it. When you place into fetal I always have the hands upright so I'm not concerned at all about finger pokes. Mostly about the angle of the knees and elbows. A lot of this will be solved with a shower stand or a stand in general but some these may be tips to new or just reiterating basic concepts. There may be things I can do better and that's why I may not post a video. I know a stand and the new standing doll idea will held promote and easier time doing some if not all of these tasks but if you want to have some fun with her hopefully this helped some of you in practicing a safe and fun time!

User avatar
lasteros
Senior Member
Senior Member
Posts: 265
Joined: Sat Sep 19, 2015 12:05 am
Location: Ontario, CA
Contact:

Re: 155 Shannon Review !!

Post by lasteros »

It should be available now, I uploaded a second video too.

https://youtu.be/J4Ifkbaa5HA

User avatar
lasteros
Senior Member
Senior Member
Posts: 265
Joined: Sat Sep 19, 2015 12:05 am
Location: Ontario, CA
Contact:

Re: 155 Shannon Review !!

Post by lasteros »

A small photo shoot for everyone :)
Attachments
20151026_202000.jpg
20151026_202000.jpg (988.71 KiB) Viewed 2983 times
20151026_201923.jpg
20151026_201923.jpg (876.43 KiB) Viewed 2983 times
20151026_201821.jpg
20151026_201821.jpg (1.05 MiB) Viewed 2983 times
20151026_201757.jpg
20151026_201757.jpg (1.45 MiB) Viewed 2983 times

User avatar
lasteros
Senior Member
Senior Member
Posts: 265
Joined: Sat Sep 19, 2015 12:05 am
Location: Ontario, CA
Contact:

Re: 155 Shannon Review !!

Post by lasteros »

Thank you Von and everyone else! :glou:
Attachments
20151026_222331.jpg
20151026_222331.jpg (1 MiB) Viewed 2945 times

User avatar
lasteros
Senior Member
Senior Member
Posts: 265
Joined: Sat Sep 19, 2015 12:05 am
Location: Ontario, CA
Contact:

Re: 155 Shannon Review !!

Post by lasteros »

Good morning! No problem, I should post more soon. But I think Mae deserves her own account and thread lol. I am extremely happy so far. Mae has brought a whole new dynamic to my life Im able to approach and work on.
There are only a few things I would change. One would be shipped naked instead of fully clothed. The marks on her breasts are almost gone. As stated before this is minor.
With TPE being fairly new I feel that all orders should come with TPE glue even if the additional cost for the glue is added to each order. The 155 model I chose, Shannon, was the most expensive tpe available and to be honest was no a good idea to learn on. I learned the hard way when her ass split a little bit. It's annoying to look at and feels impossible to fix even with glue. I can only suggest to use lots of lube however the rip happened when I was trying to clean that cavity out. It is extremely tight and despite the small tear there is little to no effect it has caused on the pleasure she gives me. I have since found a better way to clean that cavity with a aquarium pump and fan. I'm a quick learner , have worked with some plastics before but never TPE. She is a big girl and taking the time to get to know what she is made of and to take care of I would have settled for a smaller model. I really wanted something that was life sized and the weight was proportional. When I bridal carry her she feels like the weight she should be and I like that.

Locked

INFORMATIONS