Sanhui 165+
- everythingwillbefine
- Contributing Poster
- Posts: 34
- Joined: Tue Feb 14, 2017 3:22 am
- Contact:
Re: Sanhui 165+
- Count Zero
- Active Member
- Posts: 116
- Joined: Fri Feb 17, 2017 2:56 am
- Contact:
Re: Sanhui 165+
Yup! I got her last week. There's a thread about Allie here in the Sanhui section, and I've started a thread in Eye Candy here.lasteros wrote:I haven't been able to check Count Zero, but have your received you 145? I initially wanted the biggest boobs available but now I can settle for less and I even really like the flat chested model from Sanhui too. I hope your doll is as flexible as Lisa, if not give her some more time to practice and she will be. Gosh I hope I'm not wrong about that! Good Luck
I don't think Allie is quite that flexible -- I've pushed on the legs a bit, but can't seem to go past about 90 degrees.
Re: Sanhui 165+
Although Lasteros's doll has an impressive range of motion that, apparently, hasn't been given to the 145 cm model, the 145 cm remains a good choice. I don't feel compelled to trade my Sandra off.Count Zero wrote: I don't think Allie is quite that flexible -- I've pushed on the legs a bit, but can't seem to go past about 90 degrees.
Presidential Commission on Obscenity and Pornography
Does she...or doesn't she? (A slogan used by Clairol)
My dolls
Reminder to self: Still more work to do on my albums.
First photo shoot of Sandra, a Sanhui 145 cm lady doll.
[thumb]http://dollforum.com/forum/download/file.php?id=196256&t=1[/thumb]
Fun photos of my JM 110cm, Angie.
http://dollforum.com/forum/viewtopic.php?f=196&t=74121
-
- Active Poster
- Posts: 95
- Joined: Wed Jan 27, 2016 10:32 am
- Contact:
Re: Sanhui 165+
How does this new "hymen" work? What's so special about it? Is it just a tighter insert?lasteros wrote:Hey EWBF, thank you so much. From my understanding the breast implants are standard now. The butt implants I asked for and was surprised it was possible so I wanted to see what Sanhui could do for me. The hymen is only on Sanhui's newest models and they were able to also include that with Lisa as well. I'm happy with the results, plenty of cushion for the pushin'. I try and take good pictures but my phone sucks lol.
Re: Sanhui 165+
I usually get to about 90 degrees and it becomes difficult. At your own discretion apply pressure to her shoulder and press down on one leg. If anything refer to the manual, Allie should be able to do the positions that are shown and move in that manner.Count Zero wrote: I don't think Allie is quite that flexible -- I've pushed on the legs a bit, but can't seem to go past about 90 degrees.
Noo! Don't trade your Sandra off Obin lol she is a beauty.Obin wrote: Although Lasteros's doll has an impressive range of motion that, apparently, hasn't been given to the 145 cm model, the 145 cm remains a good choice. I don't feel compelled to trade my Sandra off..
Lisa is my only doll from Sanhui so I can't let you know from any comparison but I imagine the insert is the same. It's a rib all the way around about 1cm in. It feels pretty good. Innovative? lol I saw one post about it here. http://dollforum.com/forum/viewtopic.php?f=261&t=77644TwoReflections wrote: How does this new "hymen" work? What's so special about it? Is it just a tighter insert?
Thought about it and said why not? The hymen they used appears different on Lisa but I am satisfied. They possibly have more options but Lisa does have almost all of them.
- Virgin_Doll
- Doll Mentor
- Posts: 1590
- Joined: Fri Aug 12, 2016 4:47 pm
- Contact:
Re: Sanhui 165+
I know everything about it
Question about your powdering vidio.
Is there a reason why you wear gloves?
With Maja and Sarah my DH168 https://www.dollforum.com/forum/viewtop ... 59&t=89453
With mini Dolls
LUCY LISSIE MAJA SARAH
- Sanhui Doll
- Manufacturer
- Posts: 709
- Joined: Wed Feb 05, 2014 9:54 am
- Location: Nanning, Guangxi, China
- Contact:
Re: Sanhui 165+
Lasteros, wonderful photos of teasing!!! Admiring how you manage the wigs and poses so well! Also, really impressed how you choose sexy lingeries and bras that fit your lovely so well! Could you pls share this experience here in this thread to help some other Sanhui doll owners who has difficulty in choosing right ones? Noteworthy, update skeleton of flexible motion range have been applied on dolls with hinge joints (145cm-165cm) since Canton Adult Expo in last Nov. when you were in contact with us on your purchase. Our team is endeavoring in advancing skeleton and currently working on standing version. It may well be for you not to have your lovely stand for too long but await for release of her standing sisters, shall we?lasteros wrote:I usually get to about 90 degrees and it becomes difficult. At your own discretion apply pressure to her shoulder and press down on one leg. If anything refer to the manual, Allie should be able to do the positions that are shown and move in that manner.Count Zero wrote: I don't think Allie is quite that flexible -- I've pushed on the legs a bit, but can't seem to go past about 90 degrees.
Noo! Don't trade your Sandra off Obin lol she is a beauty.Obin wrote: Although Lasteros's doll has an impressive range of motion that, apparently, hasn't been given to the 145 cm model, the 145 cm remains a good choice. I don't feel compelled to trade my Sandra off..
Lisa is my only doll from Sanhui so I can't let you know from any comparison but I imagine the insert is the same. It's a rib all the way around about 1cm in. It feels pretty good. Innovative? lol I saw one post about it here. http://dollforum.com/forum/viewtopic.php?f=261&t=77644TwoReflections wrote: How does this new "hymen" work? What's so special about it? Is it just a tighter insert?
Thought about it and said why not? The hymen they used appears different on Lisa but I am satisfied. They possibly have more options but Lisa does have almost all of them.
Best regards,
Coco
Sanhui Team
Re: Sanhui 165+
Presidential Commission on Obscenity and Pornography
Does she...or doesn't she? (A slogan used by Clairol)
My dolls
Reminder to self: Still more work to do on my albums.
First photo shoot of Sandra, a Sanhui 145 cm lady doll.
[thumb]http://dollforum.com/forum/download/file.php?id=196256&t=1[/thumb]
Fun photos of my JM 110cm, Angie.
http://dollforum.com/forum/viewtopic.php?f=196&t=74121
- Count Zero
- Active Member
- Posts: 116
- Joined: Fri Feb 17, 2017 2:56 am
- Contact:
Re: Sanhui 165+
Are there other clues that would help identify whether a given SH145C is new enough to have the updated skeleton? I bought my doll from a US vendor (who had US stock) and so it's unclear to me exactly when she was made.Sanhui Doll wrote:Noteworthy, update skeleton of flexible motion range have been applied on dolls with hinge joints (145cm-165cm) since Canton Adult Expo in last Nov. when you were in contact with us on your purchase.
Re: Sanhui 165+
To be honest, I bite my nails and didn't want to scratch her needlessly. I usually use a make-up brush so powdering her is twice the time, I figured I could save you the hassle in watching me meticulously brush her.Virgin_Doll wrote:Your Lisa has also been such a tease lasteros
I know everything about it
Question about your powdering vidio.
Is there a reason why you wear gloves?
Thank you Sanhui! I try and take care of my wigs, but when it comes down to it I'm able to restyle them. I get my wigs from a local beauty supplier.
I've lucked out with clothing because a lot of the clothes I already had fit Lisa. I looked for medium sized clothing and one-size fits all lingerie. I usually go to the Love Shop here in Canada. Most outfits they have are appealing and have a large selection of lubrication to choose from, it's a one stop shop! A good place for accessories believe it or not is Spencer's Gifts. You'll be able to find seasonal outfits and lingerie here as well as bracelets, earrings, studs, necklaces, stockings, belts and tiara's . Thigh highs are the hardest thing to find, in white. I would call around to shops that specialize in bras and lingerie for this item. It'll be the only reason you have to go there if you don't want to look around for some panties or bras. I don't really like bras on my dolls for a couple reasons so I have stayed away from them.
I'll keep posting more pictures, I'm in the process of moving though.
Sanhui, you make great dolls. I look forward to seeing both yours and other manufacturers advancements. I'm happy to be a doll owner. Whatever skeleton you gave me holds up very well when standing and the pressure on her feet is not visible. Nearly resembles a natural ankle when bent. No worries though, she spends 99.9% of the time laying down with a pillow under her thighs to support her juicy butt. In the video I show the massaging of the butt and boob implants that was shown in a video you e-mailed to me, I hope I'm doing it right xD.
The hardest thing for me is standing her up in fact so I only do it to wash and powder her. Mae is significantly lighter so it is easier to rest her butt on my one thigh and straighten her legs from a bridal position. Lisa's legs are firm and don't bend easy so maneuvering her from laying down to vertical requires some serious effort without throwing my back out lol. I usually lift her up by the arm pits on the edge of a bed or table with her legs still straight and that does the trick.
I just can't wait until I have a doll that can stand up.... on her own :O One can dream can't he?
Kudos.
Re: Sanhui 165+
- Attachments
Re: Sanhui 165+
Also, I'm more comfortable now uploading some video content. Should be up shortly.
- DollAfficionado
- Member
- Posts: 11924
- Joined: Mon Jun 17, 2002 12:00 am
- Location: In Doll Paradise
- Contact:
Re: Sanhui 165+
Review of my SUKI doll from Sili Doll viewtopic.php?f=253&t=73439