A new introduction about SANHUI 160
- Bazinga
- Doll Mentor
- Posts: 1240
- Joined: Fri Sep 11, 2015 8:41 pm
- Location: On A Train....Of Thought
- Contact:
Re: A new introduction about SANHUI 160
"Give me a lever long enough and a fulcrum on which to place it, and I shall move the world."
-Archimedes
- Sanhui Doll
- Manufacturer
- Posts: 709
- Joined: Wed Feb 05, 2014 9:54 am
- Location: Nanning, Guangxi, China
- Contact:
Re: A new introduction about SANHUI 160
Yes, according to our engineers, the heads are interchangeable, so you can get quite a lot of choices.rock1101 wrote:Wow!!! There are more pretty faces. It's a bit confusing, though. Now we have 3 different faces for 160 and 165 each, and totally there are 6 faces, right? Are they all interchangeable? The #3 face for 165 seems fit well in my 160 doll.
Would you place those faces side by side so we can see their differences more clearly. I personally love the new #3 face for 160 the best.
And I think it will be fun to place the faces side by side and figure out the difference, I will do that in the near future, once it's done, I will definitely post it here.
Email: admin@sanhuidolls.com (admin&support) & info@sanhuidolls.com & sanhuidollschina@yahoo.com (order & pay)
Skype: sanhui1
- Sanhui Doll
- Manufacturer
- Posts: 709
- Joined: Wed Feb 05, 2014 9:54 am
- Location: Nanning, Guangxi, China
- Contact:
Re: A new introduction about SANHUI 160
We have Asian faces, western faces and Japanese anime faces, you can pick your choice already, but not inserts yet.....Bazinga wrote:I too would love a beautiful Asian face......and maybe inserts in the future.
Email: admin@sanhuidolls.com (admin&support) & info@sanhuidolls.com & sanhuidollschina@yahoo.com (order & pay)
Skype: sanhui1
- dollylamma
- Doll Elder
- Posts: 2221
- Joined: Sat Dec 15, 2007 12:00 am
- Contact:
Re: A new introduction about SANHUI 160
I'm surprised the two are so close in measurements?
The shorter torso does give a slightly more curvier look.
I thought the 160 had a thicker neck?
DL
Re: A new introduction about SANHUI 160
If the quality of the dolls can be kept high, and the after-sale support improved, Sanhui will be back on track to becoming a major force in the industry.
Re: A new introduction about SANHUI 160
Also, it might be better if you gave the available heads for the 160 and 165 names instead of numbers, as numbers can get confusing.
- Sanhui Doll
- Manufacturer
- Posts: 709
- Joined: Wed Feb 05, 2014 9:54 am
- Location: Nanning, Guangxi, China
- Contact:
Re: A new introduction about SANHUI 160
They are all available right now, and you can make orders directly form us.rubyfan wrote:Is the 160 being produced for order now, or just the new faces? Also can you list your official resellers in the USA where we can place orders?
Also, it might be better if you gave the available heads for the 160 and 165 names instead of numbers, as numbers can get confusing.
"Also, it might be better if you gave the available heads for the 160 and 165 names instead of numbers, as numbers can get confusing."
---we will put all the available heads together and give you a better perspective about the difference between each of them, that' what we are planning to do next.
Email: admin@sanhuidolls.com (admin&support) & info@sanhuidolls.com & sanhuidollschina@yahoo.com (order & pay)
Skype: sanhui1
Re: A new introduction about SANHUI 160
I love the look of the faces you produce, and while I know you're trying to keep the weight down, she does seem very thin for her height & her legs look almost too long, IMO. Too bad you couldn't produce something around 155cm, with more realistic thickness legs, arms, & neck, while keeping the weight around the same. Don't mean to offend - just my observations, as I would like to order one of these in the future, if/when this sort of body becomes available.
BTW, you should have TDF change the link in your banner at the top of the Sanhui section's page to your new site, as it still directs you to the older site without the option for English (https://sanhuidoll.1688.com/).
- Sanhui Doll
- Manufacturer
- Posts: 709
- Joined: Wed Feb 05, 2014 9:54 am
- Location: Nanning, Guangxi, China
- Contact:
Re: A new introduction about SANHUI 160
Hey there,airgirluvr wrote:While the 160 & 165 both look nice, it's a shame that you couldn't have deviated a little more from the 165 with this newer one. I'm mean, if you didn't tell me they were different, I'd have had trouble even knowing the two side by side bodies weren't the same.
I love the look of the faces you produce, and while I know you're trying to keep the weight down, she does seem very thin for her height & her legs look almost too long, IMO. Too bad you couldn't produce something around 155cm, with more realistic thickness legs, arms, & neck, while keeping the weight around the same. Don't mean to offend - just my observations, as I would like to order one of these in the future, if/when this sort of body becomes available.
BTW, you should have TDF change the link in your banner at the top of the Sanhui section's page to your new site, as it still directs you to the older site without the option for English (https://sanhuidoll.1688.com/).
I have told the manager of TDF, thanks a lot, really appreciate that. If you need anything, feel free to contact me.
Kimi from SANHUI Sex Dolls.
Email: admin@sanhuidolls.com (admin&support) & info@sanhuidolls.com & sanhuidollschina@yahoo.com (order & pay)
Skype: sanhui1
Re: A new introduction about SANHUI 160
Agreed for the smaller dolls too, I can't keep the numbers and letters straight! Plus they can look different in certain situations. Even if you just called them "western happy" or something.rubyfan wrote:Also, it might be better if you gave the available heads for the 160 and 165 names instead of numbers, as numbers can get confusing.
These are some of the best faces though. I'd like to see each face on each doll body it is compatible for. This kind of thing should be on your website.
Re: A new introduction about SANHUI 160
I think this will make a lot of people happy.
艶( Tsuya) - Orient Industry Izumi head on Jewel Real Taste 146(L) body
Tinúviel - EXDOLL Samantha head on Orient Industry Jewel Candy Girl( Jewel 2) body
Yuzuki, Tsuya & friends
Re: A new introduction about SANHUI 160
Nice innovation! Is that only on the 160, or is it on the 165ex also?
Kudos to Sanhui for listening to customer feedback.
Add an insert capability and shorten/thicken the body to 155cm and it's a competitive doll.
Re: A new introduction about SANHUI 160
Two eye colors on one eye??!! Great!!
This also means you don't have to dig out her eyes to make these or other eyes fit properly.
Re: A new introduction about SANHUI 160
Might be getting close to time to get a new head.
Presidential Commission on Obscenity and Pornography
Does she...or doesn't she? (A slogan used by Clairol)
My dolls
Reminder to self: Still more work to do on my albums.
First photo shoot of Sandra, a Sanhui 145 cm lady doll.
[thumb]http://dollforum.com/forum/download/file.php?id=196256&t=1[/thumb]
Fun photos of my JM 110cm, Angie.
http://dollforum.com/forum/viewtopic.php?f=196&t=74121
- Sanhui Doll
- Manufacturer
- Posts: 709
- Joined: Wed Feb 05, 2014 9:54 am
- Location: Nanning, Guangxi, China
- Contact:
Re: A new introduction about SANHUI 160
Hey, it's about to be applied on the 160 and some other dolls, but our engineers are trying to do it better, so it's still not available right now, but will be soon.
You guys like it?
Email: admin@sanhuidolls.com (admin&support) & info@sanhuidolls.com & sanhuidollschina@yahoo.com (order & pay)
Skype: sanhui1