Wow!, OR H Cup, First Doll
Wow!, OR H Cup, First Doll
The weight of her didn't quite register until I tried to just lift her out of the case...nope, had to do some clever positioning to get more leverage. The good news is I'll be down 50 lbs and rocking six pack abs by Christmas, due to all the cardio and strength training involved The joints are really stiff as well but I haven't found any that I can't bend yet, I did learn fairly quickly that the ankles don't rotate like the wrists do although they do move on a single axis to tilt the feet up or down.
The tpe material isn't quite as soft as I'd hoped, particularly in the breasts, though it's softer than I feared. I probably won't ever go for such large breasts again unless they start using some sort of gel implant with a very thin layer of tpe, similar to the busty aichan's. If I hadn't been as impulsive I'd probably have ordered a smaller cup doll and a set of busty aichans to strap onto her when I was in the mood, but oh well, live and learn. The ears are amazingly soft and supple on these dolls, couldn't tell the difference between them vs a real woman, and the fine details in the palms of the hands and soles of the feet are all present and very lifelike, this foot fetishist has never been happier. Well that's pretty much all I have to report for now, need to grab some food as I haven't eaten for 16+ hours while waiting on the doll and spending time with her, then I'll wipe her down and apply some baby oil
- Ztar073
- Doll Elder
- Posts: 2118
- Joined: Fri May 19, 2017 12:54 am
- Location: Former californian
- Contact:
Re: Wow!, OR H Cup, First Doll
-
- Doll Mentor
- Posts: 1605
- Joined: Thu Jul 23, 2015 8:14 pm
- Contact:
Re: Wow!, OR H Cup, First Doll
Re: Wow!, OR H Cup, First Doll
No damage at all aside from some minor compression marks, even the breasts are full/not smooshed.Ztar073 wrote:I saw your last thread get ugly . Good to hear that things got sorted out well enough in the end . Nice that she isnt damaged too. It is recommended on this forum to thoroughly clean and dry your doll like 5 or 6 times the first day before you oil her fwiw. took me all day when I did it to my doll. If she stimulated you as much as you say in your post I think you are going to be a happy man when you actually do the deed. We all like to stare at photos of other peoples dolls so post em when you got em.
Hmm, 5-6 times seems a little excessive, I guess some people prefer to be overly cautious. I wiped her down with a bubble bath solution and wiped her again with water to "rinse" her off. Didn't have a sponge on hand so I used some paper towels instead, minimal abrasiveness but they do leave an annoying residue/paper towel flakes. Applied oil on one side and let it soak in, same on the other and then a full powdering with cornstarch baby powder. This took some of the smell away for awhile but it was back in full force by morning, and her skin is sticky again. These sponge baths are a pita, might have to find a way to give her a shower instead (yeah I know no baths). I'm not much of a photography guy, and I didn't realize it when building her, but she's basically the identical twin of the "pornstar" in this rather amusing op/thread: http://www.dollforum.com/forum/viewtopi ... 24&t=85187
The customs issue from the last thread was sorted out, customs made a massive error in the amount of fees and I was also unaware that doll companies undervalue the dolls in an attempt to save customers some money. Joyce apologized for not letting me know how they would be valuing the doll in advance, if I had known it would have alleviated any unexpected surprises, and I could have made the initial downpayment in the amount the doll was valued, to have "proof" of value to show to customs. I don't have a problem with trying to dodge exorbitant fees, but it goes more smoothly when the customer is aware of the process, particularly as not all customers would be okay with undervaluing. Customs outfoxed us this time, although their initial fee of ~$580 (CAD) was luckily an error, the corrected fee was ~$340 (CAD) much more reasonable (though as far as I'm concerned any forced taxation is objectively a form of theft).
Re: Wow!, OR H Cup, First Doll
My bad, it's the 156, surprisingly smaller in person than I thought she'd be. I was considering a 140-145cm for my next doll, but now I think it will be a 148cm+ with a or b cups. If I get something with minimal boobage then I could attach the busty aichans, the trick would be getting it through customs. On the contrary I got the best sleep in awhile next to herCameramike wrote:Hello friend you didn't say what size your gal is? Don't forget to get some real zzz 's.... She might keep you up all night!!
The only downside to these dolls is the hard boobs, harder than any boob job I've ever felt and the furthest thing from real large breasts. I'm guessing that has something to do with the technique (filling them with air?), the best boob toys appear to use a thin tpe skin covering a liquid gel filling, similar to the best real implants available today. If you want a cheap example of what the boobs feel like on this doll, grab a Topco Bree Olson Boob toy for less than 100$. Of course this is also true of the butt, it's easier to overlook though as it isn't so pronounced, but again a Topco cyberskin butt is pretty close to the feel. Basically anywhere on the doll where tpe is layered thickly becomes very dense feeling/unrealistic. I know people say that tpe feels more like skin than silicone, and that may be true, but silicone covering gel implants would almost certainly feel more like flesh, and gel implants only seem to be available on silicone dolls?
- Ztar073
- Doll Elder
- Posts: 2118
- Joined: Fri May 19, 2017 12:54 am
- Location: Former californian
- Contact:
Re: Wow!, OR H Cup, First Doll
- windave
- Doll Elder
- Posts: 2909
- Joined: Mon Jan 08, 2007 12:00 am
- Location: left coastal now
- Contact:
Re: Wow!, OR H Cup, First Doll
Re: Wow!, OR H Cup, First Doll
Yeah, I kind of put things off/didn't plan ahead. I knew I'd want an electric blanket, but I still need to buy one. Just took her virginity tonight, it was a rather hectic experience, her wig fell off and I just kept on going Think I was more excited than I was horny, so hopefully next time will go better with more preparation. I also noticed the insert was much easier going in than it was to take out when lubricated with vaseline, I'm guessing the interior really soaked it up. Got her a lot sweatier than I had wanted to, really need to figure out an easier/quicker way to clean her... I didn't really follow the instructions very well, I'm guessing a soap/water spray bottle and a sponge would work a lot better/quicker than soaking paper towels in soap and water, apparently circular wheels do in fact work better than square onesZtar073 wrote:The one thing I will say about the hard boob thing is that they feel alot better when the doll is warmed up.
- PaulDenton2001
- Doll Advisor
- Posts: 866
- Joined: Thu Apr 05, 2012 9:24 am
- Contact:
Re: Wow!, OR H Cup, First Doll
See this video of a 156G around the 1:03 mark, it shows the guy playing with her fun bags. Would you say your doll is better/worse?
https://www.youtube.com/watch?v=UbS4FdZl0PM
Also this one of a 156H:
https://www.youtube.com/watch?v=qf1zfy8jpgc
Did you see this thread? Looks like there was a difference between G and H cup in terms of softness.
viewtopic.php?f=224&t=89816
Re: Wow!, OR H Cup, First Doll
Honestly it's hard to say, there's a big difference between look and feel. They look squishier in those videos, and I've heard the G's are softer than the H's, but you won't know until you try them out. My guess is they are squeezing them pretty hard in those videos, because real breast just don't have the same density/elasticity and wouldn't bounce back or indent like that. Also due to the fact they are filled with air, and different thickness's of tpe are used in various parts of the breasts, the density/softness is very uneven. It's very possible that I got a hard set, and perhaps gel implant boobs wouldn't be much softer, but for now I think I'll be avoiding large breasts on dolls in the future.PaulDenton2001 wrote:Hi Taffer,
See this video of a 156G around the 1:03 mark, it shows the guy playing with her fun bags. Would you say your doll is better/worse?
https://www.youtube.com/watch?v=UbS4FdZl0PM
Also this one of a 156H:
https://www.youtube.com/watch?v=qf1zfy8jpgc
Did you see this thread? Looks like there was a difference between G and H cup in terms of softness.
viewtopic.php?f=224&t=89816
Re: Wow!, OR H Cup, First Doll
Taffer wrote:Honestly it's hard to say, there's a big difference between look and feel. They look squishier in those videos, and I've heard the G's are softer than the H's, but you won't know until you try them out. My guess is they are squeezing them pretty hard in those videos, because real breast just don't have the same density/elasticity and wouldn't bounce back or indent like that. Also due to the fact they are filled with air, and different thickness's of tpe are used in various parts of the breasts, the density/softness is very uneven. It's very possible that I got a hard set, and perhaps gel implant boobs wouldn't be much softer, but for now I think I'll be avoiding large breasts on dolls in the future.PaulDenton2001 wrote:Hi Taffer,
See this video of a 156G around the 1:03 mark, it shows the guy playing with her fun bags. Would you say your doll is better/worse?
https://www.youtube.com/watch?v=UbS4FdZl0PM
Also this one of a 156H:
https://www.youtube.com/watch?v=qf1zfy8jpgc
Did you see this thread? Looks like there was a difference between G and H cup in terms of softness.
viewtopic.php?f=224&t=89816
======================
Hello Taffer & PaulDenton2001,
Our new 156G-cup breasts is really softer than before , This design come from Japan, But we just use it on our 156G-cup , We will use this new design to 156D.E.146D.138D,160H-cup ,but we need time to change the model.
please have a look about the 156G-cup video:
https://youtu.be/U9ksUupp1aI
BR
Joyce(zihan)
Official Website: https://www.ordoll.com
TDF forum https://www.dollforum.com/forum/viewforum.php?f=224
Please remind me of your TDF username when you order or email.
- Ztar073
- Doll Elder
- Posts: 2118
- Joined: Fri May 19, 2017 12:54 am
- Location: Former californian
- Contact:
Re: Wow!, OR H Cup, First Doll
Re: Wow!, OR H Cup, First Doll
Neat, I guess I can file that under "things I'd like to have known a month ago"... Too late now, this will likely be the last Tpe doll I will ever buy. Nothing against ORDoll, Tpe just isn't right for me.ORdoll wrote: ======================
Hello Taffer & PaulDenton2001,
Our new 156G-cup breasts is really softer than before , This design come from Japan, But we just use it on our 156G-cup , We will use this new design to 156D.E.146D.138D,160H-cup ,but we need time to change the model.
please have a look about the 156G-cup video:
https://youtu.be/U9ksUupp1aI
BR
Joyce(zihan)
Either way, people seem to be wary of softer formulations of Tpe after the Jinsan Ultrasoft failed to provide long term durability. I hope this is some sort of breast implant technology rather than just a softer formulation of tpe?
- PaulDenton2001
- Doll Advisor
- Posts: 866
- Joined: Thu Apr 05, 2012 9:24 am
- Contact:
Re: Wow!, OR H Cup, First Doll
Sorry to hijack Taffer's thread but I want to be clear here. Is that the default for the 156G now or do we have to ask for a specific softness when ordering?ORdoll wrote: Hello Taffer & PaulDenton2001,
Our new 156G-cup breasts is really softer than before , This design come from Japan, But we just use it on our 156G-cup , We will use this new design to 156D.E.146D.138D,160H-cup ,but we need time to change the model.
please have a look about the 156G-cup video:
https://youtu.be/U9ksUupp1aI
BR
Joyce(zihan)
Thanks
- timetraveler1
- Doll Visionary
- Posts: 12332
- Joined: Tue Apr 13, 2004 12:00 am
- Location: u.s.a.
- Contact:
Re: Wow!, OR H Cup, First Doll
anyway good idea making the breast even softer , it will greatly add to the realism of real breast!