SKYLAR Sleepy and Sexy DS 163 #silicone repairs made easy
Moderator: jiayi
- Ddwyerstar
- Doll Advisor
- Posts: 663
- Joined: Tue Aug 18, 2015 12:21 am
- Location: Florida
- Contact:
Re: SKYLAR Sleepy and Sexy DS 163 #silicone repairs made eas
- Attachments
DS 163 pink skin, closed eye WM head 59 AKA "Skylar"
DS 163 pink skin, ORdoll head 088 AKA "Sabrina"
DS 163 pink skin, Jiaxin head AKA "Allie"
MY DOLL ALBLUM http://www.dollalbum.com/dollgallery/in ... ?cat=14604
- von_Shredhead
- Doll Guru
- Posts: 5561
- Joined: Tue Mar 06, 2012 7:34 pm
- Location: Third Rock From The Sun
- Contact:
Re: SKYLAR Sleepy and Sexy DS 163 #silicone repairs made eas
Great repairs and thanks for the instructions and links to the products you used. This will be very helpful in the near future.
Skylar in Pink ... AWESOME!!! I can only imagine fighting temptation while doing the photo shoot ... I'd lose too!
Cheers!
Von
Nina's Thread - Doll Sweet 145cm
Lila's Thread - Doll Sweet 145cm
Heather's Thread - 4Woods Allure
Sativa's Thread - Virgin Rose Kelu
Naomi's Thread - 1AM WM125
"Build a man a fire, and he'll be warm for a day. Set a man on fire, and he'll be warm for the rest of his life."
- Hungry Bear
- Doll Advisor
- Posts: 598
- Joined: Sun Nov 19, 2017 6:00 pm
- Location: Northwettest
- Contact:
Re: SKYLAR Sleepy and Sexy DS 163 #silicone repairs made eas
- Kazuya
- Doll Advisor
- Posts: 565
- Joined: Thu Dec 28, 2017 8:23 am
- Location: East Anglia, United Kindom
- Contact:
Re: SKYLAR Sleepy and Sexy DS 163 #silicone repairs made eas
Re: SKYLAR Sleepy and Sexy DS 163 #silicone repairs made eas
That is one very sexy looking doll lady!
I really would..............
Looking forward to seeing more of her!!
Re: SKYLAR Sleepy and Sexy DS 163 #silicone repairs made eas
Re: SKYLAR Sleepy and Sexy DS 163 #silicone repairs made eas
He made the adaption himself as can be found here:Kazuya wrote:Loving the pink wig. Very sexy. Did you need an adapter for the WM and OR heads?
https://www.dollforum.com/forum/viewtop ... 43&t=74208
You can get an adapter to put M16 thread heads( WM, OR, ...) onto a DS body from DollStudio, however this is one of the very few adapters where fitting may not be without problems.
I suggest you read the post in the link above as it mentions some issues.
Basically on most M16 heads the thread depth into the head is too shallow to accommodate the DS mounting spire so you have too options to deal with that:
a) keep the head intact and accept a certain amount of spacing between the bottom of the head and top of the neck on the order of an inch/2-3cm which may or may not show as a gap
b) carefully destroy/remove the fiberglass bottom of the threading to allow for the spire thereby most likely also impairing any oral use of the head.
Note that I have seen heads that had an "open" threading into the head already but only rarely, those would always work.
I hope this helps.
Kind regards.
艶( Tsuya) - Orient Industry Izumi head on Jewel Real Taste 146(L) body
Tinúviel - EXDOLL Samantha head on Orient Industry Jewel Candy Girl( Jewel 2) body
Yuzuki, Tsuya & friends
- Kazuya
- Doll Advisor
- Posts: 565
- Joined: Thu Dec 28, 2017 8:23 am
- Location: East Anglia, United Kindom
- Contact:
Re: SKYLAR Sleepy and Sexy DS 163 #silicone repairs made eas
Thank you MI6c for your comprehensive response.mi6c wrote:He made the adaption himself as can be found here:Kazuya wrote:Loving the pink wig. Very sexy. Did you need an adapter for the WM and OR heads?
https://www.dollforum.com/forum/viewtop ... 43&t=74208
You can get an adapter to put M16 thread heads( WM, OR, ...) onto a DS body from DollStudio, however this is one of the very few adapters where fitting may not be without problems.
I suggest you read the post in the link above as it mentions some issues.
Basically on most M16 heads the thread depth into the head is too shallow to accommodate the DS mounting spire so you have too options to deal with that:
a) keep the head intact and accept a certain amount of spacing between the bottom of the head and top of the neck on the order of an inch/2-3cm which may or may not show as a gap
b) carefully destroy/remove the fiberglass bottom of the threading to allow for the spire thereby most likely also impairing any oral use of the head.
Note that I have seen heads that had an "open" threading into the head already but only rarely, those would always work.
I hope this helps.
Kind regards.