Doll arrived today...disappointed...may sell her
-
- Doll Advisor
- Posts: 555
- Joined: Sat Dec 29, 2012 2:41 pm
- Contact:
Doll arrived today...disappointed...may sell her
Well, my doll arrived today after 32 days of waiting. If anyone has seen my posts lately you know that I was counting the minutes until she arrived! Now she's here and she is a stunner! However, there are some issues and when considering all of them I feel compelled to sell her and try to recoup some of my losses.
Here are a few things that I feel I was let down on:
-I requested floppy loose joints and was told that request would be met. But aside from the hip joints that spread the thighs, the joints are all very stiff. I have to fight to move the legs up and down and the back joint...I wasn't sure if that was going to bend but I finally got it to move. I should have went with YL since they not only do loose joints upon request, but ask you which ones you want loose and how loose.
-I'm a foot guy!! Which means I requested no standing foot option to keep the feet more realistic and sexy feeling and looking. That also means that there is a chance for foot damage during shipping. So was there foot damage?? That's an understatement. I'll post pics of each foot and as a foot guy my disappointment is quite high for this one. Instead of looking pretty like I know they would have if they were ok they look all deformed. What a buzzkill!
-One of the biggest things I was anticipating, for months before I even ordered the doll, was actually seeing a #51 head with dark hair and brown eyes. When I ordered the doll I ordered her with brown eyes. A week or two later I ordered another set of blue eyes, just to change it up once in a while. But the most important thing was brown eyes. I knew that the doll had the blue eyes in the head from the pic Joy sent me last week and as I was opening the box I was thinking that the first thing I was going to do was change out the eyes to the brown ones. Guess what? The doll came with the blue eyes but the brown eyes are nowhere to be found. Not only did I not receive my first choice of eye color, I'm now out $20 clams I paid for the extra set of eyes. Yeah, I can email Joy and probably get them sent, but at this point I don't see the point.
-I was hoping to dodge the bullet on this one, but...the tits and ass became flat during shipping. Now I'm guessing they hopefully will go back to their old shape in the near future. And they aren't completely flat and damaged, but it was a bit disappointing to see that the the tits and ass did get flattened a bit.
-the toenails weren't painted the color I requested. They give the option to request a color and I did. Doesn't matter...the feet aren't very nice to look at now anyway.
And here are some things that I was maybe being idealistic but got hit with a dose of reality:
-the vagina is angled upward, the entrance is a bit high, and its so tight that I'd never be able to get inside! I've had dolls that had this same issue and I performed some quite extreme modifications to remedy this. The modifications worked and the result was a quite realistic sensation. However, this doll is brand new and do I want to start cutting into it to make room for a meiki onahole? Heck no! But the result of that is a doll that isn't really usable for what I want it for.
-the doll isn't tall enough. Yes, its tall and that is nice. But while I was checking her out I realized that even with her height during any playtime my chin would be at her forehead. Such a pretty face but during any playtime I won't be able to see anything but the top of her head I know now that an ideal doll for me would have to be around 5'10". I know they don't make dolls that tall. But back to my situation - I'm not finding the doll to be tall enough for me. I was hoping for the best in this department but its just not so.
But she is beautiful! Look at the pics I took of her...the black wig was supposed to be for the brown eyes and the blonde wig for the blue eyes. But blue eyes for both wigs I guess. I'll post more pics later, foot damage and stuff.
- Attachments
Re: Doll arrived today...disappointed...may sell her
Before you get rid of her, think about contacting the vendor. Tell them everything that is wrong. Give them a chance to put things right.
Which doll is this, exactly?
*My juicy Cherry: viewtopic.php?t=154759
*Z-cup Moira: viewtopic.php?t=138543
*BBW Breanna: viewtopic.php?t=143116
*Yulia: viewtopic.php?t=122950
*Tina viewtopic.php?t=121819
*Aurora Jolie: viewtopic.php?t=106838
*World-famous Una Carha: viewtopic.php?t=93292
-
- Apprentice
- Posts: 13
- Joined: Sun Jan 08, 2017 6:15 pm
- Contact:
Re: Doll arrived today...disappointed...may sell her
- Boobman
- Doll Mentor
- Posts: 1988
- Joined: Wed Feb 15, 2017 12:03 pm
- Location: Las Vegas, Nevada
- Contact:
Re: Doll arrived today...disappointed...may sell her
WM 168 E CupCF wrote:She is pretty! She reminds me of a girl who stole my heart.
Before you get rid of her, think about contacting the vendor. Tell them everything that is wrong. Give them a chance to put things right.
Which doll is this, exactly?
-
- Doll Advisor
- Posts: 555
- Joined: Sat Dec 29, 2012 2:41 pm
- Contact:
Re: Doll arrived today...disappointed...may sell her
This is a WM 168 E cup. I don't know what they can do about the feet. I had such high hopes for this doll but live and learn I guess.CF wrote:She is pretty! She reminds me of a girl who stole my heart.
Before you get rid of her, think about contacting the vendor. Tell them everything that is wrong. Give them a chance to put things right.
Which doll is this, exactly?
Here are some more pics, including feet damage and you may be able to tell that the ass is flat.
- Attachments
-
- Doll Advisor
- Posts: 555
- Joined: Sat Dec 29, 2012 2:41 pm
- Contact:
- Boobman
- Doll Mentor
- Posts: 1988
- Joined: Wed Feb 15, 2017 12:03 pm
- Location: Las Vegas, Nevada
- Contact:
Re: Doll arrived today...disappointed...may sell her
- Boobman
- Doll Mentor
- Posts: 1988
- Joined: Wed Feb 15, 2017 12:03 pm
- Location: Las Vegas, Nevada
- Contact:
Re: Doll arrived today...disappointed...may sell her
- Schenker411
- Senior Member
- Posts: 360
- Joined: Mon Dec 23, 2013 6:41 pm
- Contact:
Re: Doll arrived today...disappointed...may sell her
The tight joint thing I don't get, because you sound like you have experience and (I may be wrong) but isnt it common wisdom they come with the joints tight and then they loosen over time? Both of my dolls were just like that. In fact I kinda enjoyed "breaking them in".
Pussy too tight? Not to my eyes man, I think it looks very nice and if its a bit snug you get some John Holmes wood going and break it in. Don't tell me it can't be penetrated.
Like I said the foot damage makes it unacceptable. Personally I put my dolls in socks and boots right away to prevent damage, but then again your into feet.
But wow she is way pretty and if she was here in front of me she would get majorly plundered.
BTW my 1st doll from the manufacturer, everything was wrong. They screwed up literally everything, even the compensation for screwing up. It's all a game brother.
-
- Doll Advisor
- Posts: 555
- Joined: Sat Dec 29, 2012 2:41 pm
- Contact:
Re: Doll arrived today...disappointed...may sell her
The boobs are just flat from compression, like the butt. So hopefully they will regain their full shape at some point. I'm not so optimistic about the damage to the feet, though.Boobman wrote:ilikedolls123, Sorry about the problems with your WM 168 E Cup. I hope the flattening goes away with a extended vaseline rubdown & massage. Did the boobs deflate or just suffer from compression marks from shipping materials perhaps placed over them? After seeing the other tipped doll & its damage to its feet, the butt from its own weight compressing the U.S. TPE, i am convinced that if they are going to sell the dolls in U.S. TPE they need to re-design the cardboard shipping cartons they use now & go with a new design taller too to acommodate 4-6 inches of foam bedding that evenly distributes the dolls weight. Those hard cases they sell with the body cut-out in the foam imo is almost mandatory for U.S. TPE dolls. Shame she & all the 168 E Cups are so damn pretty. Give the option to have them made in solid regular TPE too, the only way i would order one & i love this body so much!
Yeah, the distance they travel just gives too many opportunities for the box to be stood on one of its ends. Then all the weight goes onto the feet, or onto the neck bolt. The body cut-out would definitely distribute the weight much more evenly when the box inevitably gets stood on one of its ends.
I'm disheartened about dolls in general at this point. Buyer's remorse has set in. I don't even think she's worth $1k in the shape she's in, so its like what is the point of trying to sell her? Such a pretty face, too.
-
- Doll Advisor
- Posts: 555
- Joined: Sat Dec 29, 2012 2:41 pm
- Contact:
Re: Doll arrived today...disappointed...may sell her
Yeah, I did that by trying to feel around to where the canal led, trying to figure out if I can bore out the pussy area to install a Tomax Venus Real Soft. The Tomax Venus Real Soft feels quite real, and if I'm going to keep this doll I may as well install that thing because the built-in that this doll is just uncomfortable, and sex shouldn't feel "uncomfortable"!Boobman wrote:Looks like she may have a anal tear.
- Boobman
- Doll Mentor
- Posts: 1988
- Joined: Wed Feb 15, 2017 12:03 pm
- Location: Las Vegas, Nevada
- Contact:
Re: Doll arrived today...disappointed...may sell her
If i recall you were only going for a 4 month romance no matter what right? I would get with Joy, maybe they replace her for you or get your money back. If they replace it see if they could get her in regular TPE, then try to sell her brand new.ilikedolls123 wrote:The boobs are just flat from compression, like the butt. So hopefully they will regain their full shape at some point. I'm not so optimistic about the damage to the feet, though.Boobman wrote:ilikedolls123, Sorry about the problems with your WM 168 E Cup. I hope the flattening goes away with a extended vaseline rubdown & massage. Did the boobs deflate or just suffer from compression marks from shipping materials perhaps placed over them? After seeing the other tipped doll & its damage to its feet, the butt from its own weight compressing the U.S. TPE, i am convinced that if they are going to sell the dolls in U.S. TPE they need to re-design the cardboard shipping cartons they use now & go with a new design taller too to acommodate 4-6 inches of foam bedding that evenly distributes the dolls weight. Those hard cases they sell with the body cut-out in the foam imo is almost mandatory for U.S. TPE dolls. Shame she & all the 168 E Cups are so damn pretty. Give the option to have them made in solid regular TPE too, the only way i would order one & i love this body so much!
Yeah, the distance they travel just gives too many opportunities for the box to be stood on one of its ends. Then all the weight goes onto the feet, or onto the neck bolt. The body cut-out would definitely distribute the weight much more evenly when the box inevitably gets stood on one of its ends.
I'm disheartened about dolls in general at this point. Buyer's remorse has set in. I don't even think she's worth $1k in the shape she's in, so its like what is the point of trying to sell her? Such a pretty face, too.
- Sunny Evergreen
- Active Member
- Posts: 142
- Joined: Sun Mar 05, 2017 6:24 pm
- Contact:
Re: Doll arrived today...disappointed...may sell her
Yeah, that "US" TPE is really delicate. I had no idea when I ordered mine that it came with that type as a default... Give it a week to recover. Maybe a hot compress will help the feet out.
She is so pretty, I hope you can find a way to make it work out!
Cheers.
Sunny--
- Boobman
- Doll Mentor
- Posts: 1988
- Joined: Wed Feb 15, 2017 12:03 pm
- Location: Las Vegas, Nevada
- Contact: