How to dry your Fleshlight?
Re: How to dry your Fleshlight?
Re: How to dry your Fleshlight?
The large quantities of water I shake out and then put my fingers in and out a few times to pull any larger amounts out. Then, I use paper towel sheets pushed through one end to the other. Sometimes I'll put my mouth on one end and suck air through for a few minutes to remove any hint of residual moisture.
I've never found it difficult to get these dry quickly.
- Luminous
- Senior Member
- Posts: 276
- Joined: Mon Aug 01, 2016 11:52 pm
- Location: Dreaming in the dream of the Great Dreamer...
- Contact:
Re: How to dry your Fleshlight?
Though I very rarely use my Fleshlights these days, I find the plastic casings to be a huge hassle to deal with and clean. I much prefer those one piece meiki's instead (the material is easier to clean too).
I have yet to test this out for myself, but if you want the ultimate drying solution for the fleshlight, I recommend you look into the 'PEET dryer':
It's not what it's designed for, but I think it'll work out just fine
- PoolShark84
- Contributing Poster
- Posts: 34
- Joined: Mon Feb 13, 2017 10:43 am
- Contact:
Re: How to dry your Fleshlight?
-
- Contributing Poster
- Posts: 20
- Joined: Sun Dec 24, 2017 11:42 pm
- Location: phoenix arizona USA
- Contact:
Re: How to dry your Fleshlight?
one other thing I haven't tried yet. the room mate has an air compressor (the type used for airbrushing, airing up tires and inflatible furniture). It can hold about 150 psi, so spraying some air up through the toy should blow out any water.
Re: How to dry your Fleshlight?
Now I've got some bigger sex toys and this method is a pain, so I may check some other way to dry inside them.
-
- Contributing Poster
- Posts: 35
- Joined: Wed Aug 10, 2011 3:36 pm
- Contact:
Re: How to dry your Fleshlight?
The way to do it is clean them with 70% alcohol solution, and find a brand of paper towel that doesn't break up on contact with water, like "Plenty". Then wrap the towel up like a little cylinder and push it through the sleeve, squeezing a bit to make sure it's contacting all the surface. That will make it fairly dry.
For the next step, close up the case with a silica gel sachet or two. The little microbes depend on moisture to proliferate and make their bad smells.
If you are disciplined like this you could make the sleeves go on a long time, mine are 3 years and counting. Except that in the real world sometimes you get lazy, which is why some of mine have a slightly musty odour, but not black spots.
Leaving them out in the open is not such a clever idea I think, they will just attract dust and mould spores, apart from making you look like a pervert if they are discovered. Just let silica gel do the work, they are cheap really and you can dry them out in the oven and re-use if you are really concerned with the cost. Personally I don't because my oven is not very clean, yuk.
Re: How to dry your Fleshlight?
I just bought a TW100 for just $26! But it has two tiny output ports, and doesn't come with any tubing to attach to them. Anyone know the tubing size for those ports, plus where to find an adapter that converts from ports with that tubing size to a port for a much larger tubing size (by which I guess I mean somewhat larger than the Fleshlight's inner chamber diameter)."I use a Tetra Whisper 100 air pump, which cost me about $45. I could probably have gotten away with just getting the Whisper 20 model, which is only $23, but wanted to make sure the pump I got was strong enough to do the job."
Many thanks in advance!
Re: How to dry your Fleshlight?
I went out and sought an answer from an aquarium forum:coyote2 wrote:I just bought a TW100 for just $26! But it has two tiny output ports, and doesn't come with any tubing to attach to them. Anyone know the tubing size for those ports, plus where to find an adapter that converts from ports with that tubing size to a port for a much larger tubing size (by which I guess I mean somewhat larger than the Fleshlight's inner chamber diameter)."I use a Tetra Whisper 100 air pump, which cost me about $45. I could probably have gotten away with just getting the Whisper 20 model, which is only $23, but wanted to make sure the pump I got was strong enough to do the job."
https://www.reef2reef.com/threads/tubin ... -1.761873/
It worked. I think that a single 3/4" output tube might have been a better choice than the single 1" tube I opted for. Instructions for both are on that URL.
Re: How to dry your Fleshlight?
- ralphatron
- Newbie
- Posts: 1
- Joined: Mon Nov 30, 2020 10:47 am
- Contact:
Re: How to dry your Fleshlight?
https://www.etsy.com/listing/816032108/ ... omatic-pro
They even have a smaller more compact one that uses the same highspeed blower fan to get the sleeve dry in about an hour (also on sale now too):
https://www.etsy.com/listing/843712052/ ... sb-powered
Re: How to dry your Fleshlight?
Seems to be working.
I also just invert the sleeves, or fleshlight insert to wash / dry them. They will take it, if you are careful. Invert the whole thing, dry it, then flip it back to normal.